Best gas leak detectors for 2024

Today's realities are such that carbon monoxide levels can be exceeded everywhere. Almost all of us live as if on a powder keg, you do not know where and when it might burst. The news is scary. To maximize your safety and peace of mind, you should install a gas leak sensor. Our article will detail the ranking of the best gas leak sensors for 2024.

Operating principle

The operation of gas alarms can be divided into two parts. The first is to record critical indicators of gas pollution in an apartment or other room. Sensitive elements with which the device is equipped are responsible for this task. It turns out that the sensor works like a device for intake and passing air through itself. It becomes an air analyzer and, if an increased concentration of toxic substances is detected, to which the sensitive elements are oriented, a signal is triggered.

The second part is to inform the owner when a critical gas concentration has been detected. Some devices are equipped with special communication channels, for example, the owner of the premises receives an SMS on the phone.

What are

Now on the market there are different gas leak detectors sold, they are divided according to the principle of operation, by the type of the sensitive element and by the type of gas detected (carbon monoxide, carbon dioxide and natural). By the principle of operation, it means that there are wired devices that connect to a 220 volt network, and there are wireless devices. Their functioning depends on the battery, which is very convenient when the electricity is turned off in the house.

The sensing element is of three types: semiconductor, catalytic and infrared. The most inexpensive ones are those with a semiconductor element, and they are most often bought by ordinary property owners. Catalytic analyzers are used at large industrial enterprises, their action is based on the combustion of gas and its decomposition into carbon dioxide and water. Infrared devices pass gas through their beams and determine the excess concentration with extreme precision.

Rating of the best gas leak sensors for 2024

Bradex Sentinel Gas Leak Sensor

According to buyers, the budget Bradex Sentinel sensor has proven itself well. The device is installed on any flat surface, not far from the power source. Attached with two screws. If desired, it can be connected to a fire or burglar alarm system. Manufacturing material - high-impact plastic. Size: 110 * 70 * 40 mm, weighs a little, only 240 grams. The device is triggered at a gas concentration of 10% LEL. The signal comes in the form of a sound and is accompanied by flashing. There is a start button and two lights: green and red.The device is equipped with grilles on the sides for gas sensitivity. Bradex is an Israeli brand, but the production itself is located in China.

You can buy it for 650 rubles.

• Budgetary;
• With alarm;
• Small size;
• Easy to operate.

• It worked poorly for some people;
• Pets can react negatively to alarm sounds.

BASTION B40 DG

The BASTION B40 DG wireless signaling device is very popular. It can be installed in absolutely any room: at home, in a store, in an office, in a warehouse, etc. The signal range extends up to 100 meters. Inside the sensor there is a special plate called the catalyst. When gas hits it, the catalyst starts to heat up and the sensor is triggered. The alarm goes to the central unit, after which the siren sounds. Device dimensions: 115x70x40 mm. Externally BASTION B40 DG. Neat and compact looking. There is a built-in antenna.

You can buy it for 1260 rubles.

• Convenient and compact;
• Affordable cost;
• Wireless;
• The siren turns on;
• Easy to operate;
• No additional configuration required.

• Simple, no bonuses.

Kenary GD 100-CN

Another high-quality Russian-made device is called the Kenar GD 100-CN. This device is designed for automatic continuous monitoring of an increase in gas concentration in a room. When the thresholds are exceeded, an alarm sounds. Shows the excess of carbon monoxide and methane, is used in rooms where gas burner equipment is installed. In addition to sound signaling, light indication is activated. Operation provides for manual testing mode. To do this, a special "TEST" button was made on the device, by pressing it, an imitation of an increase in gas concentration will begin. In case of any malfunction, the yellow LED on the indicator lights up and the buzzer starts to sound (half a second beep, 3 seconds pause). Dimensions: 135 * 82 * 41 mm.

You can buy it for 2500 rubles.

• Wide scope of application;
• Sound and light indication when the permissible values ​​are exceeded;
• Possibility to control the solenoid valve;
• Response threshold - 10% LEL / 85 PPM;
• Power consumption no more than 3 W;
• Standalone control sensor.

• There are complaints about low sensitivity.

Sapsan GL-100

If you are looking for a control sensor with a closing valve, then take a look at the Sapsan GL-100. Detectors of this type are good not only because they give a signal as soon as the gas concentration exceeds the permissible value, but also automatically cover its flow. Such a sensor can be installed in any room where the gas equipment is located. Sapsan GL-100 will need to be attached in close proximity to the gas appliance. If there is a leak, the device goes into alarm mode, emits a loud squeak and gives a voltage of 12 V to the shut-off valve. As a result, the highway is blocked. Country of origin: China.

Equipment cost: about 3000 rubles.

• There is a red button for emergency gas shutoff;
• Closing valve;
• Suitable for any room;
• Good reviews on the web;
• Provides security.

• Not detected.

Gas leak detector Rubetek KR-GD13

The rating of high-quality alarms includes the Rubetek KR-GD13 gas leakage sensor. This wonderful modern device will inform you about a gas leak on your phone. The built-in siren also turns on, which will easily alarm neighbors, thanks to the powerful warning system, gas leaks are prevented at an early stage. The volume of the siren reaches 85 dB, it is triggered when the concentration of carbon monoxide reaches 10%. MicroUSB power supply. For full functionality, you need a Rubetek device with Smart Link function.In addition, you will need to install the company's free application on your smartphone, thus establishing control over the sensor signal. Dimensions: 85x115x35mm. Ease of management will be understandable even for a student. The sensing element works well and gives a sense of security.

You can buy it for about 3,000 rubles.

• Informing on the phone;
• There is a loud siren;
• Easy to operate;
• Compact dimensions;
• High quality sensing element.

• The price may seem high.

ALFA 501

A gas leakage control device with an ALFA 501 emergency gas shut-off valve is purchased for apartments and rooms where there are gas stoves. Thanks to the control system, gas tragedies can be prevented. The method of action is simple, as soon as the sensor detects a problem, it sends a pulse to the valve, and after the received signal, it automatically shuts off the gas. The valve can then be opened manually by lifting the valve button up. The buzzer also sounds. The main purpose of the ALFA 501 is the control of natural gas and propane-butane. The range is up to 100 meters, the siren volume reaches 85 dB.

You can buy it for 2700 rubles.

• Safe and reliable;
• Loud siren;
• A valve that turns off the gas supply;
• Simple setup;
• Affordable use without complexity.

• Not detected.

SEITRON RGDME5MP1

SEITRON RGDME5MP1 is considered one of the best signaling devices. Its purpose is to accurately and quickly detect natural gas leaks. As soon as an increased gas concentration is detected, an alarm signaling an explosive situation starts. In addition to the alarm triggering, a signal is issued to start the operation of the supply and exhaust ventilation. Or, alternatively, a signal is triggered to activate the solenoid valve to stop gas delivery. You can install the alarm in the kitchen and other areas. The technical characteristics are at a height, so the response threshold is at 10%, the operating temperature is from 0 to + 40 ° C. Indicator lights are present. Red means alarm, yellow means fault, and green normal operating state. The device is manufactured in Italy. An additional bonus can be considered the presence of a self-diagnostic system that checks the operability of the sensitive element and the entire signaling device.

You can buy it for 4,700 rubles.

• High Italian quality;
• The presence of light indicators;
• Self-diagnosis system;
• Solenoid valve that stops gas delivery;
• Signal to activate the hood.

• The price may not be affordable for everyone.

Brennenstuhl BG2202

If you want to have a device with extended functionality, then pay attention to Brennenstuhl BG2202. The structure is made of plastic and metal, it is easy to attach and does not raise any questions. The device can be used for an apartment, house, cottage, office and other premises. The complete set includes the sensor itself, an adapter, a pair of screws, a pair of debels and instructions for use. Dimensions: 45 * 185 * 170 mm, weighs 400 grams. The number and voltage of the batteries are 220 V. Brennenstuhl BG2202 operates from the mains, has a built-in signal and is easy to install. As soon as an increased gas concentration is detected in the air, an alarm is triggered with a volume of 85 dB.

You can buy it for 3700 rubles.

• High quality;
• Convenient use;
• Compactness;
• Good signal.

• High price.

One-component gas contamination control system KRISTALL-1

Professionals advise to install a one-component gas control system KRISTALL-1. The package includes a gas contamination sensor for methane SZTs-1, a connecting cable, a signaling valve, an electromagnetic shut-off valve KZEG-ND, a remote control panel is made on request. The system perfectly controls gas content in rooms.If the permissible gas levels are exceeded, the system provides a powerful sound and light alarm, in addition, the pipeline with the gas supply is shut off. The causes of the accident are memorized by the device and displayed on the remote control panel. If you buy the same CRYSTAL system, but number 2, then an additional carbon monoxide alarm is included there.

You can buy the system for 4,600 rubles.

• Advanced functionality;
• High signal quality;
• Light signaling;
• There is a shut-off valve;
• There is a control panel.

• Price.

Gas detector CEM GD-3300

According to many buyers, one of the best gas leak detectors is the CEM GD-3300 gas detector. Its peculiarity lies in the fact that it perfectly responds to as many as 16 types of gas. The device is equipped with a semiconductor type sensor. As soon as an excess of gas in the air is detected, an audible and visual alarm is immediately triggered. The preparation time for the device is 1 minute. Working temperature, ° С from 0 to +50. Complete set: detector, 3 type C batteries, box case and instruction manual. Thanks to the 360 ​​mm long flexible probe, it is possible to find leaks in hard-to-reach places. The convenient rotary handle allows you to vary the sensitivity of the device. The continuous working time is 8 hours, the working humidity is 10 to 90%.

You can buy 4400 rubles when the sale price is halved.

• Detects 16 types of gas;
• Work in labor-intensive places;
• Autonomous battery power supply;
• The rotary knob adjusts the sensitivity.

• Not found.

Where to put in the apartment

Gas leakage alarms are installed in an apartment at certain points, which depend on the type of gas being detected. So, if you have a natural gas detector, then it must be placed in the upper area of ​​the apartment, retreating about 30 cm from the ceiling. During its spread, carbon monoxide fills the entire room evenly, so it is convenient to place the sensor for its determination at the level of human height, that is, about one and a half meters or more from the floor.

General recommendations for installing sensors include the following tips:

• Signaling devices should be installed near the gas equipment;
• In no case should the alarm devices be installed in a place where there is no air circulation (blind zones, behind the cabinets);
• If there is ventilation nearby, then the sensors are not placed next to it;
• Do not install near windows, above a stove, with heaters or where there are sources of fire.

Conclusion

When choosing a suitable gas leak detector, remember that an inspection from a specialized organization is required once a year. This office should do metrological verification of sensors. This is done to ensure safety, to make sure that the equipment is working and working properly. Keep an eye on the sensitive element, it has its own expiration date, which is indicated by the manufacturer, and when it ends, a replacement is required. The gas leak detector must be kept clean and free from dust, ash, soot and other debris. Wipe gently with a damp cloth, avoiding damage.

A well-chosen and correctly installed sensor will provide you with peace of mind and remove anxiety. So, taking care of such a sensor is beneficial not only for safety reasons, but also for the sake of peace of mind.