The best manufacturers of mortise locks for doors for 2024

Any property owner is committed to ensuring its safety. For this, strong doors and reliable locks are installed. At the same time, the locking device must have certain characteristics of burglary resistance in order to protect against thieves. Now on sale you can find locks of different models of Russian and foreign manufacturers. To choose a quality locking device, you need to know what criteria to pay attention to. This and the best manufacturers of mortise locks will be discussed below.

Selection criteria for door locks

There are several options for locking mechanisms used to protect doors:

• Locks with a cylinder mechanism are widespread among the inhabitants of our country. They are distinguished by low burglary resistance. Therefore, experts do not recommend installing them on the front door. To strengthen the weak points of the cylinder mechanism, some manufacturers supply the locks with an armored steel plate or special balls. The advantage of this model is the simplicity of the device. If you are not lucky enough to lose the key, there is no need to completely change the lock. You just need to purchase a new core and a set of keys to it.
• Crossbar locking mechanisms are even simpler. Therefore, their reliability is even lower. Such a locking mechanism cannot be installed on the door of an apartment or house. It will be appropriate only on the door of the utility room, where there is nothing of value.
• The suvald castle was created a long time ago. Such a device has good burglary resistance, therefore it is still in great demand. It is very difficult to pick up a lock pick for him. The disadvantage of such a lock is the need to lock the door not only from the outside, but also from the inside. In addition, if you lose the key, the door will have to be broken open, damaging the door leaf.
• Electronic locking devices have been gaining popularity among Russians in recent years. They are distinguished by their high cost, therefore they are not yet the sales leaders. It is very difficult to break the electronic lock yet. After all, there are several options for controlling the mechanism. The lock can be opened by the owner's fingerprint, by entering a code, an electronic card or from the remote control.
• Combined locking devices provide the home with maximum protection. This is especially important if the lock is purchased to protect entrance doors. Breaking open such a door is complicated by the fact that the locking mechanism consists of several independently working parts. An available example is a combination of cylinder and lever locks equipped with protective pads.

According to the method of installation, locking systems are divided into 3 groups. Mortise models are best suited for entrance doors. For doors made of metal, an insert option is provided if there is a pocket for this in the canvas. Surface locks are very easy to install and use, but they have low strength. Therefore, it is undesirable to install them for entrance doors.Padlocks are suitable for protecting outbuildings.

By safety, the locking mechanisms are divided into 4 classes. You can see which class the lock belongs to in the product passport. According to statistics, an experienced burglar will open first class locks within 5 minutes. While it will take him at least half an hour to break into a class 4 locking device.

The best manufacturers of mortise locks for doors

Mul-T-Lock

A well-known manufacturer from Israel has been producing locks for 40 years. All this time, the products show themselves only from the best side. Therefore, this company is among the leaders. To support its products, the company has opened service centers in many countries. The company produces high security locks. Therefore, she has patented several hundred inventions. The company independently designs and manufactures machine tools on which they create devices with increased reliability. For the manufacture of keys and moving parts, the company uses cupronickel. Therefore, they have increased reliability and resistance to external influences. This also explains the long warranty period of this company's locks. The latest generation of Mul-T-Lock locks are protected against key counterfeiting. Therefore, it is not possible to duplicate them.

Of all the models of locks, the inhabitants of our country especially appreciate the locking systems designed for metal doors. For example, the 265 model is especially popular. It is equipped with four locking channels, a six-speed control mechanism. The device is very high quality, reliable and affordable. According to buyers, this model works smoothly and has a reliable mechanism.

• unique technologies and high-quality equipment;
• resistant to external influences;
• increased degree of secrecy;
• reasonable prices.

• not found.

Kale kilit

The company from Turkey has been manufacturing and in-house development of locking systems, armored doors and safes for over 50 years. The company has vast experience and modern production solutions. Here they are constantly introducing advanced developments, using innovative technologies. Therefore, the products of the Turkish company are always in great demand and do not lose their relevance. The latest development of the Turkish company is a cylinder lock, which activates a sound warning system when trying to break.

Among Russian consumers, the locks of the Turkish company are in demand for their reliability and affordable price. Lever locks are especially popular, which are much superior in quality to products of Chinese counterparts. The quality characteristics of Turkish locks allow us to compare them with the products of leading Italian firms. The Kale 257 lock is especially popular. It has a simple and reliable design, but it can withstand attempts to break it.

• high build quality;
• acceptable price;
• high resistance to cracking;
• ease of installation.

• the locking mechanism quickly fails.

Cisa

An innovative approach and vast experience make the well-known Italian company one of the best lock manufacturers. The company actively implements modern production technologies when creating locking systems. Therefore, the products of the Italian company Cisa are popular in many countries of the world. Now the assortment of the company includes more than 30 thousand different models of locks and other products. The engineers of this company created an electronic lock for the first time. Now the company's engineers are developing a more modern model that can be controlled from a smartphone.

In Russia, the products of the Italian company are very popular. Any models of this company are ideal for equipping office and residential premises. Cisa cylinder locks are especially popular. They have enhanced protection against burglary. Customers value the Cisa 11610.60.1 model the most. It successfully combines reliability and affordable price.

• huge assortment;
• affordable cost;
• application of innovative technologies in work;
• excellent burglary resistance of locks.

• not found.

Mottura

This company is also based in Italy. It is ranked among the best thanks to the uniqueness of its locking systems. The company has been operating for over 50 years. During this time, more than a thousand of our own developments have been created, and many patents have been obtained. Therefore, consumer demand has been at a high level for many years. This firm has a practical solution to the problem of lost keys. Not every company has such an opportunity.

Thanks to a special system of codes, the base of the lock can not be changed. This is a very practical solution for leverage locks, which saves a lot of money. In addition, the nucleo conversion function is provided in some models. To do this, you need to purchase new keys of a certain design. After performing a simple algorithm, the lock can be recoded for a new set of keys. The Mottura 54.Y787 My Key model is especially popular with Russian buyers. It is designed for an entrance metal door. If necessary, for this model, you can quickly change the keys without disassembling the lock mechanism. Buyers find this solution practical, thoughtful and very modern.

• practical solutions to the problem of lost keys;
• excellent product quality;
• easy installation;
• high reliability.

• high prices;
• insufficient level of security.

Abus

The company has been in existence since the 20s of the last century. She began her career with the production of padlocks for outbuildings. Now it is a large company with the participation of international capital, engaged in the production and sale of a variety of locking systems. The design of the outer case of the locks of this company is very simple, but the reliability of the cylinder mechanisms has an undoubted advantage over similar products of competitors. Abus locks are reliable, durable, provided with several degrees of protection.

Russian buyers appreciate the products of the German company for the quality of the materials used. For installation in entrance doors, the ESK PZ 2 55/20 model is often purchased. Due to the universal body, it has an acceptable cost, it can be combined with cylinders of other brands. Customers note the high quality of corrosion protection. Therefore, such locks are often purchased for installation in rooms with high humidity.

• excellent product quality;
• long-term operation of the mechanism;
• high burglar resistance;
• good corrosion protection.

• overpriced for some models;
• small assortment in stores.

Abloy

This Finnish company has been around for over 100 years. Its main assortment is cylinder-type mortise locks. Thanks to the vast experience and constant implementation of new developments, the locks of the Finnish company are recognized as one of the best in burglary resistance. Among the many models of the company there are locking mechanisms with the Anti-Panic function, and modern interactive models controlled remotely are also produced here. There is a special system that makes it possible to combine several locks into a single mechanism. This system is especially popular in offices, retail and warehouse premises.

Locks installed on interior doors have gained immense popularity among Russians. There are especially many positive reviews about the ABLOY LE310 model. It is very convenient, suitable for furnishing interior doors, sometimes it is used for emergency exits. Such a lock does not need to be constantly locked when leaving the room. It slams shut automatically. Therefore, in order to get back, you must have a key with you.

• many functional solutions;
• durable and reliable products;
• convenient to use;
• the mechanism works very smoothly.

• high price.

Titan

The company from Slovenia has been successfully producing its products for over 100 years. It started its activity back in 1896.A quarter of a century after the foundation, the first mortise lock was released by the engineers of this company. Since then, Titan has been successfully promoting its products on the market. The company is ISO 9001 certified. Now this company is one of the largest manufacturers of locking mechanisms. Its products are sold all over the world. Among the developments of this company is a revolutionary system of locks, which is placed inside the door leaf imperceptibly for others. It can be controlled by means of a radio signal. Breaking this lock is impossible.

The Titan-Battery + model is especially popular with buyers. It is discreetly installed in the door and provides increased door security. The mechanism works reliably when connected to an electrical network or from batteries. The castle is equipped with several levels of protection. The control panel of this mechanism has a lock against accidental pressing.

• vast work experience;
• many of our own developments;
• excellent product quality;
• reliability of mechanisms.

• high cost of production;
• electronic locks sometimes malfunction.

Elbor

This company is the most famous manufacturer of locks in Russia. It manufactures products that are popular with domestic buyers. They are attracted by the high quality that ensures safety combined with a fair price. Elbor locks reliably protect apartments and offices. Therefore, buyers often prefer them. The reliability of the locks of this company is evidenced by the recommendation of the Ministry of Internal Affairs of Russia of some models to be installed on the doors of weapon rooms.

The SAPPHIRE 1.09.06.5.5.1 model is especially popular. it has a high level of burglary resistance and protects the door well from illegal entry. Buyers note the excellent quality of the metal and the reliability of this lock. The device has a special design that makes it impossible to break it.

• acceptable cost;
• high level of burglary resistance;
• reliable operation of the mechanism;
• maintenance-free.

• the key comes in with difficulty;
• keyhole through.

Border

Border is the largest manufacturer of locking mechanisms in Russia. The basis for the founding of the company was the Ryazan plant of calculating and analytical machines. More than 300 different models of locks are produced here. They are sold both in the domestic market and in other countries. The company has its own design office. Therefore, they constantly improve their developments taking into account the operating experience of models released earlier.

The products of this company are always relevant, which is noted in numerous customer reviews. Also, many are satisfied with the excellent quality of the case and movement materials. Due to their increased burglary resistance and good quality, Border locks are recommended for equipping entrance doors and weapon safes. The BORDER 71602 model is especially popular. It has excellent protection against burglaries and is popular with consumers. It is often bought to equip metal entrance doors.

• parts made of steel are electroplated;
• acceptable prices;
• excellent burglar resistance;
• attractive appearance.

• the mechanism quickly fails;
• long keys.

P / p No.	Company name	Country	Popular models
1	Mul-T-Lock	Israel	256
2	Kale kilit	Turkey	Kale 257
3	Cisa	Italy	Cisa 11610.60.1
4	Mottura	Italy	Mottura 54.Y787 My Key
5	Abus	Germany	ESK PZ 2 55/20
6	Abloy	Finland	ABLOY LE310
7	Titan	Slovenia	Titan-Battery +
8	Elbor	Russia	SAPPHIRE 1.09.06.5.5.1
9	Border	Russia	BORDER 71602

There are many factors to consider when choosing a lock. The cost of the model plays an important role here. Indeed, this parameter is directly affected by the number of levels of protection, the quality of materials and the popularity of the brand. The firms presented in our rating are not the only manufacturers of locks, but their products undoubtedly deserve attention.