The best rubber bases for gel polish 2024

Every girl wants to look good and for this she does many different procedures, one of which is a manicure. Previously, you had to paint your nails almost every three days, but time does not stand still, and everyone's favorite gel polish appeared. Thanks to a special base coat, the varnish lasts for 2-3 weeks. But here's the bad luck: which base is suitable for brittle nails, and which for exfoliating? This article compiled a rating of the best bases based on urethane rubber.

What is a base?

This is a coating that is applied for better adhesion of the color gel - varnish and the nail plate. In addition, this is a kind of protection of marigolds from the harmful effects of other materials.

There are only three types of base:

• ordinary;
• rubber;
• camouflage.

It is the rubber coating that is especially popular, since rubber strengthens the nail, and the coating itself fits tightly onto the plate and facilitates the alignment process.

Consider the rating of quality products that are used as a baseline coverage.

Top 4 rubber bases for brittle nails in 2024

Bluesky rubber base

1 place

The product is easy to apply with a flexible brush, does not flow under the cuticle and perfectly self-aligns along the nail plate.

Parameters	Characteristic
Volume	10 ml
Consistency	thick
Polymerization time	UV - 2 minutes; LED - 1 minute.
average price	RUB 100

• does not spread;
• economical consumption;
• versatility (combined with all types of gel polishes);
• cost.

• Strong smell;
• lack of vitamins in the composition.

A Chinese product that is evenly distributed over the nail plate. The viscosity of the product allows you to fill all the cracks. Some masters use the coating as an independent strengthening for brittle nails.

Uno Lux Rubber Base

2nd place

The coating adheres well to the plate, does not require prior application of a primer. Craftsmen loved "Uno Lux" for the fact that it is easy to apply, hides all defects and does not peel off.

Parameters	Characteristic
Volume	15 ml
Consistency	moderate viscosity
Polymerization time	UV - 2 minutes; LED - 30 seconds.
average price	RUB 690

• without bubbles;
• firmness;
• the smell does not "hit" the nose;
• no detachment from the edge;
• ergonomic elastic brush.

• difficult to remove when soaked;
• cost.

This product is classified as a hypoallergenic base coat. Allergies, of course, can appear in units, but this material in most cases reduces the likelihood of an allergic reaction in humans.

Impuls kauchuk Base Liquid

3rd place

A unique coating, does not sag, even keeps the unfortunate corners on a square shape.For a fragile nail plate, it is recommended to use more and acrylic powder for greater strength.

Parameters	Characteristic
Volume	12 ml
Consistency	medium viscosity
Polymerization time	UV - 2 minutes; LED - 30 seconds.
average price	RUB 590

• medium viscosity;
• faint smell;
• conflict-free, works well with other colors;
• comfortable brush to use;
• self-leveling consistency;
• without bubbles.

• Not found.

A slightly acidic coating is suitable for brittle marigolds. This tool aligns well, you do not need to make any special efforts; but in appearance it looks natural, and the nail does not look like a "pie".

Premiere

4th place

Self-leveling base, evenly covers the nail plate, does not flow under the cuticle. The coating stays strong for 3 weeks without chipping.

Parameters	Characteristic
Volume	8 ml
Consistency	thick
Polymerization time	UV - 2 minutes; LED - 30 seconds.
average price	RUB 200

• easy-to-use brush, villi do not climb;
• no nasty chemical smell;
• budget;
• economical consumption;
• easy application;
• persistent.

• Not found.

The coating lays down evenly, hiding any irregularities, hardens firmly and strengthens the plate.

Brittle nails are the most common problem most girls face. It is very difficult to grow the desired length with such features, or to go at least a week with a "whole" manicure. Special bases for brittle nails come to the rescue. Manufacturers make a hard, glass coating that does not bend, which allows the varnish to wear longer.

Top - 4 rubber bases for soft and fine nails

Kodi Rubber Base

1 place

Due to its density, the material does not flow under the cuticle, does not spread along the side ridges, if you work with it for a long time. In addition, it can be used in design: secure fixation of any strasses of various sizes.

Parameters	Characteristic
Volume	8, 12, 35 ml
Consistency	thick
Polymerization time	UV - 2 minutes; LED - 30 seconds.
average price	RUB 600

• smooth cut on a brush;
• there is a choice of the required volume of the bottle;
• lack of a pungent odor;
• economical consumption;
• increased adhesion.

• it bakes strongly during polymerization.

Good remedy. Only one layer is enough to make the marigold harder, stronger as a glass. It is very important that after removal the plate looks healthy and does not dry out. Please note: the coating has a sticky layer.

Bloom rubber base

2nd place

Suitable for both professionals and beginners, since there are no streaks due to the density, you can safely smooth everything with a thin brush. Can be used as a primer when using hard gels.

Parameters	Characteristic
Volume	15 ml
Consistency	moderate viscosity
Polymerization time	UV - 2 minutes; LED - 1 minute.
average price	390 RUB

• plastic;
• profitability;
• firmness;
• cost;
• easy to apply;
• lack of chips.

• Not found.

Russian-made material firmly holds even on the most "thin" nails. It can be used to repair the length of the nail plate (extension), and also strengthens, makes the nail stiffer and smoothes well.

Nano Professional NANLAC GUM

3rd place

The material does not drip from the brush when typing, it is very convenient to distribute it over the nail plate. It is also very easy to make the right highlights with it due to its self-leveling ability.

Parameters	Characteristic
Volume	15 ml
Consistency	very thick
Polymerization time	UV - 2 minutes; LED - 30 seconds.
Average price:	1000 RUB

• elasticity;
• acid-free;
• easy to dispense;
• a shortened brush that is convenient to use;
• harmless;
• you can extend the nail;
• self-leveling.

• cost.

The German product is distinguished by its special wear. It seems to adhere tightly to the nail, there are no chips, no detachments, even shrinkage.The brand even has a whole system designed for soft and thin nail plates (bonder, primer, base).

Rio Profi Rubber

4th place

In addition to the transparent coating, the manufacturer also produces several camouflage colors.

Parameters	Characteristic
Volume	15 ml
Consistency	very thick
Polymerization time	UV - 2 minutes; LED - 30 seconds.
average price	RUB 300

• brush;
• firmness;
• versatility;
• cost.

• on some marigolds it shrinks after a couple of 2-3 weeks;
• it is difficult for beginners to work;
• small bottle.

The tool hides absolutely all the irregularities on the marigold; it is not at all difficult to apply it due to excessive thickness.

All of the top coatings provide durable reinforcement for soft, thinning and bendable nails.

Top - 2 rubber bases for normal nails

Olea Nail Rubber Base Premium

1 place

One of the few bases that does not smell of poisonous chemicals, the smell is unobtrusive and pleasant.

Parameters	Characteristic
Volume	15 ml
Consistency	low viscosity
Polymerization time	UV - 2 minutes; LED - 30 seconds.
Average price:	RUB 500

• easy-to-use brush;
• pleasant aroma;
• keeps square corners;
• firmness;
• cost;
• quality.

• Not found.

The products of the Russian manufacturer (but the raw materials are made in Germany) are of very high quality. But only beginners should postpone using it, as the material spreads quickly.

Fiore Gel Polish Rubber Base Coat

2nd place

A good option for normal nails, it is also suitable for owners of too sensitive nails, but without other damage. The material can also be used for design: it firmly holds all jewelry of any size, except for those that are too bulky, of course.

Parameters	Characteristic
Volume	8, 12 ml
Consistency	moderate viscosity
Polymerization time	UV - 2 minutes; LED - 30 seconds.
Average price:	RUB 400

• cost;
• elasticity;
• long wear;
• no bubbles when applied;
• does not spread ahead of time.

Not found.

There are two ways to use this product: it can be applied in a coat provided that a primer is used, or it can be applied in two coats without a primer. It will hold on for the same long time (3-4 weeks). After application, the nails look natural without a yellow tint, but in a lamp, for example, it may seem that the product still gives off yellowness (this will disappear after polymerization).

Surprisingly, absolutely any base is suitable for normal nails, because you do not have to additionally strengthen the plate, level the bumpy surface.

Top - 4 rubber bases for damaged nails

Base Gel Polish Rubber (from TNL)

1 place

The composition is completely harmless. Perfectly hides all defects, irregularities and cuts.

Parameters	Characteristic
Volume	7, 15 ml
Consistency	thick
Polymerization time	UV - 3 minutes; LED - 60 seconds.
average price	RUB 300

• easy to work with;
• budget;
• elastic brush;
• firmness;
• quality;
• even a beginner can handle it.

• may begin to bubble;
• causes a burning sensation in an ultraviolet lamp;
• remove for a long time with a solution.

Pliable material, does not spread, is easily applied and leveled. Strengthens damaged nails, does not harm them and is worn for a long time without detachment.

Diva rubber base

2nd place

The material is comfortable to work with; will never flow where it is not needed. Bumps and irregularities are hidden by the product itself in a matter of seconds. The master only needs to slightly correct some of the defects with a thin brush.

Parameters	Characteristic
Volume	15, 30, 50 ml
Consistency	moderate viscosity
Polymerization time	UV - 2 minutes; LED - 30 - 60 seconds.
average price	RUB 700

• firmness;
• obedient;
• easy to apply;
• with a self-leveling effect;
• does not harm;
• even glare;
• no detachments;
• soft brush with an even cut.

• Not found.

Masters recommend applying this product in two layers for better durability.In addition, many people note that no one has yet had an allergic reaction.

In`Garden Rubber Ideal Nails

3rd place

In`Garden helps to create a perfectly flat surface and a beautiful, correct highlight. The brand offers, in addition to the transparent color, two more camouflages: beige and pink.

Parameters	Characteristic
Volume	11, 30 ml
Consistency	thick
Polymerization time	UV - 1 minute; LED - 30-60 seconds.
average price	RUB 600

• strengthens;
• no bubbles;
• does not burn;
• firmness;
• versatility;
• does not spread;
• economical consumption;
• there is no sharp specific smell of chemistry;
• natural composition.

• None.

The base has good adhesion to natural nails and does not conflict with gel polishes from other companies. After removal, the plate looks strong, healthy and well-groomed.

Damaged nails require particularly careful attention, since, in addition to the base, they need other compounds as reinforcement that will maximally protect the plate from the harmful effects of varnish.

Top - 3 rubber bases for peeling nails

Masura basic

1 place

The coating does not conflict with other gel - varnishes, lies flat, hides all defects.

Parameters	Characteristic
Volume	11, 35 ml
Consistency	medium viscosity
Polymerization time	UV - 2 minutes; LED - 30 seconds.
average price	RUB 400

• no chips;
• long wear;
• self-leveling effect;
• no shrinkage (even when worn for more than 4 weeks);
• not covered with cracks;
• persistence (longer than usual);
• faint smell;
• does not bubble;
• no sticky layer.

• None.

Masura claims that Masura can be worn for a long time even without prior application of a primer. The product can also be used as a stand alone coating due to its light beige tone.

Runail Elastic Rubber Base

2nd place

The material has a rather elastic structure, perfectly hides all defects and provides protection against further delamination.

Parameters	Characteristic
Volume	10 ml
Consistency	thick
Polymerization time	UV - 2 minutes; LED - 30 seconds.
Average price:	RUB 300

• ease of application;
• quality;
• cost;
• you can extend the corners.

• harsh odor.

It is very convenient to work with the coating: it does not spread, it lays down in an even and thin layer (there is no excessive volume). In addition, after drying, a sticky layer remains on the coating, which can be removed with a conventional degreaser.

Irisk professional

3rd place

Ideal value for money. The tool copes with its task: with its help, the surface of the plate is quickly leveled, does not flow under the cuticles and sides.

Parameters	Characteristic
Volume	18, 50 ml
Consistency	liquid
Polymerization time	UV - 2 minutes; LED - 30 seconds.
average price	RUB 550

• elastic;
• good adhesion;
• nice smell;
• no streaks;
• a wide range of camouflage coverage.

• None.

The manufacturer offers customers 5 types of base: pale pink, pink, milky, black and transparent.

Peeling nails are a special type that requires an individual approach, and the base must adhere well to the plate, otherwise, due to the peculiarities of the nails themselves, there will be constant detachments.

Each type of nail needs its own base. Craftsmen should pay attention to the condition of the plate, to the wear of the material. And, based on these parameters, already select the right one, otherwise the manicure will last for just a couple of days, detachments will appear. Sometimes it also happens that the entire coating comes off the nail, without damaging the plate itself, it just flies off. That is why it is important to take into account the peculiarity of nails so that in the future, clients do not have similar problems.