Best winter fishing boots in 2024

In winter cold, going fishing, it is especially important to take a responsible approach to the choice of suitable footwear. Much depends on the personal preferences and financial capabilities of the fisherman. But in any case, special requirements are imposed on such shoes. To understand the intricacies of this issue, the rating of the best boots for winter fishing will help.

Functional features of shoes for winter fishing

Fisherman's shoes in winter should be not only comfortable or waterproof, but also meet certain functional requirements. It should keep your feet warm and protect you from ultra-low temperatures, humidity and wet ice. In addition, such boots should support a person on slippery ice.

The main parameters that boots for winter fishing must meet:

• A small mass so that the shoes do not hinder the movement of a person through snow drifts to the future fishing place. Such shoes, although they should be equipped with a thick grooved sole and a significant layer of insulation, should not weigh much.
• To maintain stability on slippery surfaces, it is desirable to have a tread with a grooved pattern or with special spikes. Such precautions prevent a person from slipping on the ice.
• High thermal insulation capabilities, allowing a significant period of time to keep heat from the body.
• When choosing a pair for winter fishing, you should give preference to shoes in which the insulation can be pulled out. This helps to dry out the inner lining if necessary or replace it early if it is worn out.
• A well-chosen pair must necessarily correspond to the usual shoe size. Boots should not squeeze the feet or be too loose. Since the fisherman has been wearing these shoes for a long time, he should feel comfortable enough. Otherwise, the feet will become covered with calluses or frostbite of the tissues will begin.
• The soles of fishing boots must retain their anti-slip properties and adhere well to any surface. In this regard, it is preferable to use boots with rubberized soles.
• The shaft of such shoes must provide protection from getting wet. To give the boots the necessary properties, this part of the shoe must be made of wool, rubber or special waterproof fabric.
• It is preferable to choose a heater with excellent air exchange properties so that the feet do not sweat and do not freeze due to high humidity.
• The tops of the boots should be wide enough to accommodate the loosely thick leg of a warm fishing suit. Most suitable models are additionally provided with a lacing on the upper edge of the shoe in the form of a protective cuff. With its help, you can pull the boot to the required width. This helps protect the feet from moisture and prevents water from entering the shoe. The bootleg should be high enough to be able to safely negotiate water hazards.

Optimal material

In most cases, stores offer specialized models of boots made of rubber or EVA. In the first case, the shoes are entirely made of molded rubber. At the same time, in the area of ​​the boot, the thickness of the material is increased, and towards the bootleg it slightly decreases. On the inside of such shoes there is a multi-layer insole or a special insert, sewn to the main part or simply inserted inside. If necessary, it can be pulled out for washing and drying.

Preference should be given to models made of fine-pored rubber grades. These shoes will keep your feet warm and comfortable for several hours. Foamed thermoresin, neoprene or dense polyurethane foam meet these requirements. Thanks to advanced technology, these shoes are incredibly lightweight and can withstand temperatures as low as -25 degrees.

EVA footwear has its own advantages, which is why it has become more and more popular in recent years. This material is very lightweight and has excellent moisture protection. It perfectly insulates heat and does not give it away for a long time. As a result, EVA boots are very warm and comfortable. There is a special insert on the inside of the boots that increases the comfort of wearing. For a fisherman, EVA boots are a great option. They do not deform from the vagaries of the weather or mechanical stress; even severe frosts are not terrible for EVA.

Varieties of fishing boots

When buying fishing shoes in a specialized store, you should take into account the intensity with which it will be used, as well as what the weather conditions are in the area of ​​the proposed fishing.

The main options for shoes for low air temperatures:

• Thermal rubber boots with a boot made of high-strength molded rubber. The upper part of these boots is made of lightweight and elastic neoprene. The inner part is made of several layers of insulation and is an easily removable insert. Such shoes weigh a little and can withstand up to -25 degrees.
• Polyurethane boots have excellent grip on slippery surfaces and retain heat for a long time. They are seamlessly molded, making them durable and completely waterproof. The porous structure of the material contributes to high-quality thermal insulation and makes the product much lighter.
• EVA shoes are lightweight and have excellent thermal insulation properties. It perfectly repels moisture, and in the cold it retains elasticity due to its porous structure.
• Canadian boots are a hybrid of a canvas boot and a rubber boot. Sometimes in the area of ​​the bootleg, instead of tarpaulin, fabric with a special impregnation or natural leather is used. Among other characteristics of such boots are high frost resistance and the ability to fully retain their properties at temperatures down to -40 degrees, as well as excellent waterproofness. The shaft can be of any length.
• Warm boots made of leatherette or genuine leather. They use natural or synthetic material in several layers as insulation. With the help of such a heater, it is possible to efficiently remove sweat and keep warm inside. The lower temperature threshold, according to the manufacturer, is -80 degrees.

Most popular models

All terrain vehicle

These are domestic products, on sale for only a few years, although they have already managed to find their admirers. These boots are inexpensive. But despite the low cost, they are quite durable. They are made of lightweight and highly elastic EVA, thanks to which they are able to withstand frosts down to -45 degrees. Inside there is a four-layer insert made of natural fur.

These boots are made with a wide bootleg. They are very comfortable to walk long distances in, they do not chafe feet. Due to the low weight of 700 grams, such shoes are almost imperceptible on the foot. The upper edge is made of a water-repellent fabric cuff with a drawcord to prevent snow from getting inside. Thanks to the durable surface, the boots do not deform and are worn for a long time, they do not harden even in severe frost.

• lungs;
• durable;
• do not rub;
• comfortable;
• inexpensive.

• not found.

The average price of the model is 1800 rubles.

Baffin

These boots are made in Canada and are extremely popular. High tightness prevents moisture from entering the shoe. These boots can even withstand severe frost. Inside there is an eight-layer liner that retains heat efficiently and reliably removes moisture. Thermoregulation is provided by high-quality insoles. The special design of the rubber grooved sole allows you to hold on even on very slippery surfaces. Although the shoes look rough on the outside, they are very comfortable. Feet in them do not freeze even if you stand still for a long time.

• completely sealed;
• ergonomic;
• feet do not freeze in them;
• anti-slip.

• rough appearance;
• expensive;
• heavy.

The average cost is 8700 rubles.

Norfin

These boots are produced in Latvia. The company is known all over the world for its high quality products. New models are constantly appearing in the assortment, which are able to satisfy the highest customer requirements. High quality material is used for production, durable and durable. The boots are completely waterproof and warm. Three-layer liners are made inside to provide reliable thermal insulation.

The peculiarity of this model is that it uses a snap fastener, which is more comfortable than a lace. A special ledge is made at the back of the shoe, which makes it easy to remove the boot without using your hands. Such boots warm feet well, wick away sweat perfectly. The earbuds can be easily removed for drying. They have a very durable outsole. There is no fatigue from long walking in them. Boots are available in different versions, which makes it possible to choose a model for any weather.

• comfortable shoe;
• long-term preservation of heat;
• high-quality moisture removal;
• variety of options;
• legs don't get tired.

• not found.

The average price is 3500 rubles.

Torvi

Russian-made boots are made of high quality EVA. Each model is characterized by increased reliability, perfectly tolerates low temperatures and is of high quality. The top of the shoe is equipped with special cuffs made of water-repellent material with a reflective strip. A thick sole with grooved tread is provided for anti-slip protection. A wide cuff with a high rise is provided for high functionality.

Inside the boots are used liners made of seven-layer material. They provide reliable protection from frost and wick away sweat well. These boots are highly durable and have quality insulation. The outsole, while thick, is not devoid of flexibility. The boots have minimal weight, but they look quite rough.

• reliable protection against frost;
• high-quality moisture removal;
• durable;
• excellent insulation;
• protection against snow ingress;
• thick, stable outsole;
• light weight.

• bulky appearance.

The average cost is 1800 rubles.

Nordman

These boots are also made in Russia. The company is one of the leaders in the production of clothing and footwear for fishermen and hunters. The choice is greatly facilitated by the variety of assortment. Fishing boots have high wear resistance, attractive appearance and low cost. They perfectly retain heat, perfectly withstand temperatures down to -60 degrees. Shoes are made of a very durable material that does not allow water to pass through completely. On the lower part there is a piping with a reflector, which is clearly visible even in low light conditions.

The most popular models of boots have a unique construction of the boot part, a durable sole of sufficient height. The liner uses a multi-layer material. It absorbs sweat well while keeping your feet warm. The upper edging is made in the form of a wide cuff and is tightened with a drawstring.

• high quality;
• keep warm well;
• remove moisture efficiently;
• do not slip;
• do not allow snow to get inside;
• low cost;
• reinforced block.

• not found.

The average cost is 1,700 rubles.

Lemigo

The assortment of this company includes models of winter fishing boots made of EVA and PVC. They are distinguished by a unique combination of excellent quality and low price. The boots are lightweight, very comfortable and durable. Each model has a felt or neoprene insert inside. They allow you to keep warm for a long time and remove moisture efficiently. A tightening cuff is provided on top.

• lungs;
• durable;
• good moisture removal;
• keep warm.

• not found.

The average cost is 3600 rubles.

The presented models are far from the entire range of winter fishing shoes. Choose and need, taking into account not only the size, but also depending on future operating conditions.