Review of the best OMOIKIRI faucets in 2024

A faucet is an important part of a kitchen or a bathroom that mixes hot and cold water to achieve the desired temperature and is responsible for comfort. On the market there is a huge selection of mixers of different companies, designs, configurations, with different installation and control. Below we will tell you about OMOIKIRI mixers.

What to look for when buying

When choosing a mixer, it is necessary to take into account the shape and type of the spout, the material and finish of the body, the type of attachment, control, design. Depending on the renovation in the room, the size and shape of the sink, washbasin, bathroom, you can purchase a classic model or an Empire style, with a shiny or matt surface, with one valve or with two, with a pull-out or fixed spout. The characteristics of the product depend on the wishes of the buyer and the required functionality of the product.

High spout spouts allow you to choose shallow sinks.

Faucets by OMOIKIRI are suitable for any kitchen and bathroom, make the sink interesting and eye-catching, as the entire range has a stylish exclusive design. Consider the top ten interesting OMOIKIRI mixers.

A bit of history

Since 1981, OMOIKIRI has been producing high quality kitchen appliances and is competitive in the market for similar products. The founder of the company was Kano Miura, an entrepreneur from Japan who bought a granite deposit and a small enterprise where they made stone products. From Japanese OMOIKIRI means "determination". This is the motto that allows us to produce exclusive sinks with an unusual design from stainless steel and noble stone. In 1987 the assortment of the company expanded and kitchen mixers appeared on the market. A wide range of products is developed in the design bureau in the USA and Sweden branches.

Over time and the development of technology, the company established the production of brass and copper sinks and mixers. The brand's products have found their customers in various countries of the world, on four continents, including Australia. OMOIKIRI products began to be delivered to Europe in the early 90s. Since 2002, the company was managed by the son of an entrepreneur, and in 2009 the company was taken over by Uncle Hideji, who established international relations and a profitable partnership with a company from Russia - ARTEKEY.

The combined company patented in 2016 a new generation material with an ultra-strong polymer - ARTGRANIT®. Artificial granite and production near Moscow have significantly reduced the cost of production, making it affordable for ordinary buyers. The assortment of the company is diverse from premium to economy class. Production sites are located in Russia, China and other countries.

Materials and coatings

The company produces goods from natural and polymer environmentally friendly materials, high quality and resistant to wear. All materials have passed three-stage testing in terms of quality characteristics. The results of the conclusion determined the compliance with the technical requirements of international standards. In the technological process of manufacturing products, there is a heat treatment operation. It excludes the presence of harmful components and makes products environmentally friendly and harmless to the human body.

Applied materials and technical requirements:

• Natural granite. The stone should not contain microcracks. The surface of the granite is coated with DuPont lacquer. The coating helps to increase the life of the product.
• Artificial granite Tetogranit. Composition: 80% granite chips and 20% acrylic resin. The structure of the resin is homogeneous in its composition and serves as a reliable protection against all types of bacteria.
• Artgranit is an artificial composite substance in which the solid particles of granite and quartz are combined with a polyester resin. The resin is unique in composition and patented by the manufacturer. The main properties of the resin are strength and heat resistance.
• Copper and its zinc alloy - brass. Substances are resistant to harmful external factors and to deformation. To improve the properties, a nickel-chrome coating is used.
• Alloy steel (stainless steel) 18/8. The material has high anti-corrosion properties and excellent durability.
• PVD is a decorative coating. It has excellent wear resistance and is non-allergenic. Increases the service life of equipment.
• ORB - decorative coating. With this coating, the kitchen sink and mixer tap will last for many years. The coating is resistant to scratches and other mechanical influences. Hypoallergenic.

Review of the best mixer models

Nagano-Granit

Brass mixer with a nozzle - aerator, mounted horizontally with a flexible hose. The granite coating reliably protects the mixer from mechanical stress. The model is sold in five colors: white, beige, gray, black and brown. The matt finish allows you to match the tap to the appropriate sink. Swivel spout with traditional shape. Water pressure and temperature are regulated by one valve - a lever that turns in all directions: left, right, up and down. The mixer can be switched to a filter - a corresponding system is installed inside.

Mixer cost: 16 400 - 19 990 rubles.

• original design;
• reliable coating is presented in different colors;
• comfortable enough spout length.

• high price;
• no watering can.

Nagano-C

The single lever mixer Nagano-C is made of brass. The chrome coating ensures the durability of the product for many years. The manufacturer claims a 10-year product warranty. A small tap water hole provides a fine spray. The set includes a nozzle - aerator. There is a built-in filter. Ceramic cartridge shut-off valve. The horizontal angle of rotation of the lever is 25 degrees, the vertical angle is 90. The horizontal mounting method with one hole allows you to install the tap on the sink without additional drilled holes.

The price of the option ranges from 15 100 to 17 900 rubles.

• traditional model;
• shiny chrome finish;
• powerful;
• convenient.

• high price;
• a small hole under a strong pressure of water creates a lot of splashes;
• weak spout on filtered water.

Kanto-C

The Kanto line is presented, like most of the company's models, with one lever, without a thermostat and water heating. Built-in switch for filtered water. Swivel spout, double coated in color and metal. The body is made of copper-zinc alloy. The crane is high, it looks interesting and classic at the same time. Additional letters in the name with a hyphen indicate the color and type of coating. Kanto-BN-color - white with silver steel; Kanto PVD-GM - red with burnished steel; Kanto PVD-LG - black with gold. PVD - anti-allergenic and wear-resistant coating.One mounting hole eliminates the unnecessary cost and effort of installing the mixer on the sink.

The model costs 19,100 - 25,900 rubles.

• stylish original design;
• PVD coating with different colors is suitable for any repair;
• there is a built-in filter switch;
• simple and practical;
• installation is done effortlessly with a flexible hose.

• expensive models;
• lack of a thermostat.

Kado-Granit

The variant is made of granite-coated brass. You can order any color from the five presented. The classic look of the spout is of sufficient length and excellent dimensions. The handle is made at the top in the form of a pivoting lever and turns in any direction. When installing the mixer on the sink in the kitchen, you will have to install a tap parallel to the filtered water, which is not very convenient. The model is suitable if the sink is small and a low tap is required. It can be used for the washbasin in the bathroom or in the bathroom. A simple and versatile crane of excellent quality can be obtained from the market at a favorable price.

3,900 - 5,200 rubles - the cost on the market.

• classic look;
• granite covering in different colors;
• practical lever handle;
• simplicity and ease of use;
• small size of the model;
• reasonable price for good quality goods.

• no switch for drinking water filter.

Yamada-Granit

The brass faucet with a ceramic cartridge is one of the models in which there is a sufficient variety of colors among the products of OMOIKIRI. The presented mixers have a classic shape and look stylish on the sink in the kitchen. By analogy with other lines of the brand, there is a switch for a drinking water filter. Granite coating will help the product look beautiful for many years. The swivel spout and aerator keep the jet at the desired pressure. If your kitchen has a round sink, a spout like this is ideal.

One of the models can be purchased for 12,400 - 14,900 rubles.

• no need to install an additional filter tap;
• classic tall model;
• average price;
• a large selection of colors for any sink.

• weak switch on the filter, quickly fails;
• no pull-out spout;
• suitable for small round sinks.

Takamatsu OTA-IN-35

Single lever mixer with ceramic cartridge made of stainless steel with the same coating. After cleaning and applying a special liquid, the faucet in the kitchen will shine like new. The anti-corrosive material will last a long time, but it is not immune from minor scratches in the event of improper use and improper care. Horizontal installation on the sink and two switches - for tap and filtered water, eliminates the need to install a separate tap. The traditional L-shape of the spout facilitates washing dishes in any shape of the sink. The height of the tap allows you to wash small and large dishes without much effort. The tap can be installed on the bathroom and in the wide washbasin. The ergonomics are well thought out. Convenience and versatility are determined by the high price of the product.

16 900 - 20 900 rubles - option price.

• durable anti-corrosion material;
• the presence of a switch knob for the filter;
• traditional underwater spout;
• convenience and beauty of the model;
• excellent ergonomics.

• due to the high cost, not everyone can buy a product;
• lack of a thermostat and water heating if installed in a bathroom;
• in case of inept use, the material is subject to mechanical stress, and the appearance of the product may be damaged.

Kyoto

Mixer to order. The unusual appearance with the traditional shape of the spout is unique and suitable for expensive sinks and baths, made in the antique style of the 19th century. Body material - brass with similar coating in different shades. The product can be ordered in any metal color: gold, copper, brass, silver, bronze. The plug-on aerator is made of plastic and prevents the accumulation of rust and limescale on it.The high spout is made according to the rules of ergonomics and is suitable for washing dishes of all sizes. The delivery set includes hoses for connection, fasteners and a user manual with a warranty card. The usual horizontal attachment to a half-inch pipe using a flexible hose will allow you to install the faucet on a sink or bathroom.

The model costs 10,900 - 15,900 rubles.

• expensive semi-antique appearance;
• ergonomic model;
• excellent value for money, appearance and quality of the product;
• ease of use.

• purchased on order;
• not suitable for filtered water.

Amagasaki-Granit

Similar in appearance and design to the previous Kyoto model. The difference lies in the fact that the housing is covered with colored granite chips. Five model options can be purchased without ordering. Also, the convenience of this option lies in the presence of an internal switch for drinking water. There is no need to install a second tap under the filter. Mounting is horizontal, external, the cartridge on the shut-off valve is made of ceramic. A cute model for an expensive classic setting in the kitchen or bathroom. All ergonomic rules are followed.

The model can be purchased for 16,100 - 19,900 rubles, depending on the store.

• durable material with a color resistant coating;
• there is a switch for the filter;
• ergonomic option;
• beautiful expensive looking model.

• expensive for the average buyer.

Tokigawa-AB

The mixer is a double-lever type with a traditional form of water spout. Each valve is responsible for a specific water (hot and cold). Body material - brass with antique brass finish. Classic model with a stately appearance. The lack of a thermostat and eco mode does not make it less popular. The tap can be mounted horizontally on a bathtub or sink, like most similar products. The spout comes with an aerator nozzle. The good spout length allows you to purchase a large sink of any shape.

Tokigawa-AB costs 11,400 rubles.

• presentable appearance;
• ergonomics;
• high-quality assembly;
• classic two-valve system with one spout;
• convenience and ease of use;
• great price for such a mixer.

• the drinking tap will have to be installed separately.

Kakogava-O OKAK-ORB-35

Model with one handle - lever, without switching to the water filter. Made in retro style. The brass body with a bronze finish will last a long time if handled carefully. Swivel spout. The mixer is equipped with a convenient additional function - a pull-out spout. This design allows you to solve the problem with splashes on the walls of the sink and around it when washing dishes and products. A mixer of this type can be used on the sink and on the bathroom.

You can buy such a model in the store for 14,900 rubles.

• interesting model;
• pull-out spout;
• easy installation on the sink.

• if used carelessly, the sliding part of the spout may break;
• does not switch to potable water - the tap must be installed separately.

The main characteristics and price of OMOIKIRI mixers are presented in the table:

No. pp	Model	A type	Material	Coating	Length, mm	Height, mm	Dimensions, mm	Price, RUB
1	Nagano-Granit	single lever	brass	granite	206	268	145x294	16,4-19,9
2	Nagano-C	single lever	brass	chromium	206	268	145x294	15,1-17,9
3	Kanto	single lever	brass	bicolor	220-231	190-215	495	19,1-25,9
4	Kado-Granit	single lever	brass	granite	227	151	260x176	3,9-5,2
5	Yamada-Granit	single lever	brass	granite	205	234	372	12,4-14,9
6	Takamatsu OTA-IN-35	single lever	stainless steel	stainless steel	260	295	350	16,9-20,9
7	Kyoto	single lever	brass	brass	230	220	290	10,9-15,9
8	Amagasaki-Granit	single lever	brass	granite	215	306	370	16,1-19,9
9	Tokigawa-AB	double wishbone	brass	brass	238	162	236	11.4
10	Kakogava-O OKAK-ORB-35	single lever	brass	bronze	238	149	201	14.9

Conclusion

The weak points of all types of OMOIKIRI mixers are the high cost of models and a weak spout for the filter where it is installed: you will have to change spare parts in this area. The rest of the products meet the expectations of buyers in terms of functionality, ergonomics and beauty. High-quality assembly and complete equipment are present in all mixer models of the reviewed company.

The Japanese company OMOIKIRI produces sinks and mixers of interesting design. The brand's products are so unique that any version of the mixer will decorate the kitchen and add spice to the room.