Review of the best thermos with glass flask in 2024

A thermos is an indispensable thing for a person who leads an active lifestyle, who monitors his diet, and simply in the case when you have to stay for a long time in conditions of low or, on the contrary, high temperatures and maintain a drinking regime. In this review, the 10 best manufacturers of thermos flasks are presented, although almost hundreds of models can compete for the title of "the best thermos with a glass flask" today.

Thermos from Europe and China: is there a difference?

First, a little educational program. Nowadays, almost everything, including the best thermoses with a glass bulb, is produced in China. The exception is the EMSA thermoses, they are produced in Germany. There are also quite large manufactures of thermos with a glass flask in Brazil (TM Invista, Termolar) and India, nowhere else in the world thermos, or rather glass vacuum flasks for them, are not produced. In Russia, in the overwhelming majority, thermoses come from China, regardless of what is written on the label.

There are several reasons for the narrow production location.

First, the production is very labor intensive. If you blow glass flasks by hand, the cost of thermos flasks will be huge, so machine production is used, which requires serious financial resources (in this regard, stainless steel is simpler, it can be conditionally made even in the garage).

The second reason is environmental. Applying a heat-reflecting silver coating requires serious treatment facilities. Even in China, many factories have been closed in the past 10 years due to non-compliance with environmental requirements.

Plus, the production of plastic cases is also designed for mass production - these are the main reasons why there is essentially only one manufacturing country in the world - China, which occupies 85% of the market.

And what about Russia? Once upon a time, thermoses with glass flasks were produced by two factories. The plant PO Svetlana in the Novgorod region produced military products and, as a related product, thermoses. The plant has now closed. The Fryazinsky plant continues to produce flasks painted under Khokhloma in tin cases, but the production of flasks was closed 10 years ago, and glass flasks are supplied from China.

Considering all of the above, it should be understood that the difference in manufacturers is very arbitrary.

What are the differences and what are the advantages of thermoses with a glass flask compared to stainless

The main difference is the technology for the production of glass flasks, which, in fact, provides their main advantage - perfect tightness. The fact is that stainless steel flasks have a welded seam.Accordingly, even with very good welding quality, which is not always the case, microcracks form on the seam over time and the tightness of the flask is broken. Glass flasks do not have a weld, only a tiny, tightly sealed nipple, therefore, they do not have any problems with tightness in principle, so theoretically the best thermos with a glass flask can last forever!

 

Another significant advantage of thermos flasks with a glass flask is hygiene. Leftovers of food are easily removed from the glass flask, they are easy to wash with an ordinary detergent, without any "dancing with tambourines" such as soaking in an alkaline or acidic solution or pouring Coca-Cola. Plus, even with a long storage of food or drinks, such dishes do not absorb odors, do not change the taste and smell of dishes, which is what stainless steel flasks suffer.

A glass thermos is the best choice for baby food precisely because of its excellent hygienic characteristics.

From the walls of the glass flask, plaque from tea or coffee is easily removed. Therefore, they are best suited for brewing not only regular tea or coffee, but also herbal teas and medicinal teas.

More recently, glass flasks had one, however, a significant drawback - fragility. Today, thanks to the use of innovative technologies for preliminary tempering of glass, accidentally breaking such a flask is very difficult.

TOP 10 best manufacturers of thermos with glass flask

Selecting thermoses for the rating, we relied on reviews of real consumers, the variety of the model line, functionality and price / quality ratio.

To assess the popularity and quality of a particular product as objectively as possible, we used data from the websites of iRecommend, Otzovik, Yandex Market and a number of others, as well as materials from the websites of manufacturing companies, retailers and distributors of household thermoses.

Mimi

Chinese thermoses with a glass flask Mimi, the most famous in the Russian (and not only) market, are represented by models for drinks and for first / second courses in volumes from 0.22 to 3.2 liters. Depending on the model / volume, they are completed with one / two cups or vessels.

For the manufacture of the flask, soda-lime tempered glass is used, the body is plastic, resistant to high temperatures, painted in elegant colors. Thanks to two rubber shock absorbers at the bottom and at the neck, the bulb is securely fixed and protected from impacts. As a rule, falling from a meter height to 1 liter thermos does not threaten anything serious. In general, the products of this manufacturer are distinguished by increased care for consumers.

Models of larger capacity with a narrow neck keep the initial temperature for the longest time. Mimi thermoses are lightweight and compact, so they are designed for a wide consumer audience.

Important! A broken flask can be replaced with a new one, after which the product is again suitable for further use.

The cost of a classic thermos Mimi PNF050 (0.5 l) is 430 rubles. average.

• Impact resistant construction;
• Convenient handle on the body;
• The lid can be used as a cup.

• Not detected

Thermos

Manufactured in China, under the strict control of the German company Thermos. The line of models includes thermoses for drinks, pump, thermoses-jugs with a volume of 0.5 to 2.2 liters.

Glass flasks are made using a special patented Stronglass technology - they can easily withstand thermal shocks from both boiling and icy liquid. Keep warm up to 12 hours. The body is made of plastic, structurally it includes a shock absorber and a sealing silicone ring, thanks to which the bulb is securely fixed and protected from accidental impacts.

A specially designed valve on the lid in the open position provides convenient pouring of drinks, in the closed position it protects against leakage.

The ergonomic handle is covered with soft Santopren rubber, which makes the thermos safe and comfortable in the hand.

The cost of a classic thermos Thermos 34-100 (1 liter) is 1050 rubles.

• Ergonomic design, comfortable to use, does not slip out of hands;
• Convenience when pouring;
• Cases of leakage are excluded;
• The lid can be used like a mug.

• There are complaints about the inconvenience in washing, a complete disassembly is required, since water in some places can leak into the body.

Exco

Manufacturer - Chinese corporation Hangzhou EXCO Industrial. The main purpose of EXCO thermos flasks with a glass flask and a wide mouth is to store ready-made food, with a narrow mouth - drinks. The large diameter of the neck, alas, contributes to high heat loss, so food in such thermos stays warm no longer than 4-8 hours.

The design of the thermos is standard and includes an inner flask made of glass, an outer casing made of impact-resistant thermoplastic and a lid. Inside the thermos there is a container for storing bread or seasonings. Thermoses of this brand are characterized by consistently high temperature indicators not lower than + 55C - 58C for a 1.0 liter thermos, after 24 hours.

The cost of the classic model of the EXCO MC100 1L thermos: 320 rubles.

• Tight fixation of the bulb with two shock absorbers, which makes it impact-resistant;
• The presence of a cup in the kit;
• If necessary, the flask can be replaced, after which the thermos can be used again.

• Not detected.

EMSA

As noted above, EMSA is the only brand actually produced in Europe. The lineup includes containers for drinks, food, thermoses-jugs, there are children's models. The volume ranges from 0.5 l to 1.4 l. According to the manufacturer, their thermoses are able to keep warm up to 12 hours, cold - up to 24.

Thermoses for food are completed with containers that can be heated in the microwave. Thermos jugs are equipped with a spout for easy pouring. Thermoses for drinks "boast" a lid with an Easy Tip valve, thanks to which the lid can be opened with just a push of a button.

Since the production site is located in Germany, the price range of this brand is above average.

The cost of a classic thermos EMSA Rocket (1 l) is 1150 rubles.

• Heat preservation parameters are fully consistent with those declared by the manufacturer;
• The classic model is dishwasher safe;
• The presence of a lid-cup or additional containers included (depends on the model).

• Not identified.

Delta

"Classics of the genre" - Chinese thermoses with a narrow neck, it is convenient to store hot / cold drinks in them, brew teas and herbal preparations.

Thermoses have a painted tin body "as before", a tempered glass flask with a double-sided mirror coating, which does not absorb odors and is capable of holding the temperature of the liquid for a long time.

• The oblong shape makes it possible to conveniently place a thermos in a backpack;
• The handle makes it easy to carry;
• The lid can be used as a cup.

• The handle is only suitable for carrying, but not for pouring;
• The cup lid will heat up quickly after pouring hot drink into it.

LaPLAYA

Holding IPV Gmbh, which owns the laplaya brand, is German, the production site is located in China.

The lineup is mainly represented by thermos for drinks. In production, innovative technologies are used, due to which the products are thoughtful and convenient for the end consumer.

Thermoses are lightweight and equipped with a non-slip rubberized handle, so they are easy to carry and hold when pouring a drink, which is mainly important for people with age and disabilities.

The stopper is equipped with an additional container in which you can put sugar, tea / coffee / cream bags, which allows you to keep everything close at hand. And the special thread allows you not to completely unscrew the plug from the thermos. Thanks to the spout, the jet hits the cup precisely, eliminating spillage.

A silicone ring on the neck and a rubber shock absorber on the bottom hold the flask firmly in the body, preventing it from dangling.

Depending on the volume, the products are completed with one or two cups.

The cost of a classic thermos LaPlaya Traditional Glass (1.8 l): 900 rubles.

• Wide range of models;
• Convenience when pouring due to the ergonomic design, rubberized handle;
• The presence of a special spout, excluding spilling past the cup;
• Cork storage container.

• There are complaints about the lack of strength of the flask when the temperature drops.

Peerlees

Manufacturer - China. Thermos for drinks in plastic and tin cases and thermos for food are produced under this brand. Thermoses for drinks have a narrow neck, so they keep the temperature well. By the way, only TM Peerlees has an excellent series of thermos PEA050 / 100/180, the models of which are able to keep the temperature of the drink + 68-70 С after 24 hours (with a flask volume of 1 liter), which is a record for household thermos flasks.

Thermoses are equipped with tempered glass flasks, they can be washed without any problems, they can withstand strong temperature fluctuations, they do not absorb odors.

Thermoses with a tin case have a lid made of aluminum, which is screwed onto the thread. The inner cork is made of linden, a famous heat insulator. The top of the cork is covered with cotton material for a snug fit to the neck, which also helps to maintain the desired temperature. As the manufacturer informs, the thermos keeps the required temperature for up to 30 hours.

Thanks to two handles - movable at the top and static on the side, the thermos is convenient and easy to carry.

The line includes models from 0.45 liters to 3.2 liters, with aluminum and plastic casing.

The cost depends on the model, so the classic Peerless PEA180 thermos (1.8 liters) will cost 400 rubles.

• A wide range, there are models of different sizes, the body is made of different materials;
• Convenient handles for carrying and pouring;
• Maximum heat retention rates for models of a certain series.

• Not identified.

Attribute

Country of origin - China. Products under the Attribute brand are durable and lightweight, therefore they are indispensable for study, work, car trips.

Basically, the line includes thermoses for drinks with a neck of small diameter. Depending on the model, the body can be made of heat-resistant plastic or metal with additional protection with colored varnish, thanks to which hands do not come into direct contact with metal in the cold.

According to the manufacturer, thermoses are able to keep heat up to 12 hours, and cold up to 18 hours. High-quality thermal insulation between the glass bulb and the body contributes to the best temperature retention. Depending on the model, the thermos is equipped with one or two cup lids.

The cost of the Attribute FAMILY thermos, 1.8l: 700 rubles.

• The presence of a lid-cup included;
• Good tightness;
• A wide range of models with different volumes.

• Not the highest heat retention rates compared to competitors.

Mayer & boch

Country of origin - China. The metal case is usually burgundy red, decorated with a recognizable image of large flowers. There are models with a plastic case. The flask is made of tempered glass for easy maintenance. The thermos is equipped with an ergonomic handle for easy transportation and a tightly screwed cup lid (depending on the model of cups there can be two or three).

The thermos, according to the manufacturer, is able to maintain the required temperature for up to 24 hours. The most popular volumes are 1.8 and 3.2 liters.

The cost of the classic model MAYER & BOCH 511 (2 l): 600 rubles.

• One or more cups included;
• Easy to carry with the handle.

• The lack of a side handle and the smoothness of the body makes the pouring process difficult;
• The cup may heat up quickly when filled with hot liquid.

Konig

Manufactured in China. They have been on the Russian market for about 10 years.They are manufactured using modern technologies and undergo strict quality control. They are beautiful, reliable and functional. In the line of models there are mainly 1 liter thermoses for drinks.

Cost of the Konig International model (1 liter): 600 rubles.

• Convenient handle for pouring and carrying;
• The product is light;
• One or more mugs included.

• There are complaints about insufficient tightness.

How to choose a thermos and how to check it after purchase

Today the market offers hundreds of thermoses options. How to choose the best thermos and not regret buying after the first use? It is enough to follow a few simple recommendations!

First of all, the flask and the body must be a monolithic whole, the flask must be in a spacer, not dangling. If the flask is movable relative to the body, such a thermos is unsuitable for use.

The thermos should not emit any sharp chemical odors, whether it be a body, a flask, a lid or a cork. Perhaps the seller will assure that over time the product will stop smelling, but it is not known whether the smell will disappear, or whether it will increase significantly when pouring hot drinks, it is better not to risk it.

The lid should be screwed on without effort, should not be twisted, there should be no gaps between the body and the lid. The inner plug, if there is one, should fit snugly into the neck, not loose. Also check how easily the bottom of the thermos unscrews - this can come in handy if you need to replace the glass flask; the forums have repeatedly described cases when the owner could not unscrew the bottom in any way.

We also recommend that you pay attention to what temperature and how long the thermos can hold, usually this information is indicated by the manufacturer in the product passport or on the case marking. The temperature of the liquid, which the manufacturer guarantees for 12-24 hours (as a rule), should not be lower than + 50-60 degrees Celsius, this will immediately indicate that this is the best thermos in front of you.

As for the volume of the thermos, it depends on your goals and is selected individually. It is logical, for example, that the best thermos for family needs - large displacement, office or study - is suitable for small, for walking - medium volume. It may be worth purchasing several different copies at once and using them for different purposes.

After purchase, we strongly recommend that you check the performance of the thermos. Pour boiling water into a thermos and leave for a couple of hours. Then touch the body - it should be slightly warm, but not hot in any way. A hot case is evidence that the thermos cannot keep the temperature declared by the manufacturer and it is better to refrain from purchasing it.

How to replace the flask, where can you buy them

In order for a thermos with a glass flask to serve for more than one year, handle it with care - do not drop it, do not stir strongly with a metal spoon, do not pour boiling water into a thermos brought from the cold. For whatever the manufacturers claim, glass flasks, despite modern materials and technologies, are still less durable than stainless steel flasks.

If you are unlucky and the flask is broken, you can not throw out the thermos, but try to reanimate it and replace the flask with a new one.

Actually, replacing the flask is done quite simply by unscrewing the bottom of the thermos along the thread. However, there are several pitfalls here. And this is not at all about the difficulties of unscrewing the bottom (although this also occurs). Firstly, not all shops offering to buy a thermos also sell flasks - too much hassle with a meager profit. So you will have to look for a replacement flask.

Secondly, flasks for different models of thermoses, even from the same manufacturer, with the same volume, may differ. What can we say about flasks from other manufacturers. Therefore, when purchasing a replacement flask, be sure to check whether it fits your thermos model.

And further. There are thermoses not repairable initially, roughly speaking, disposable. So if you want to have no problems with buying and replacing a flask, pay attention to repairable brands.

For example, Hangzhou EXCO Industrial, which produces thermoses TM Mimi and EXCO, has opened a special section on its website where you can select and order a glass flask or a small and inexpensive spare part, for example, a rubber gasket or stopper. The owner just needs to fill out the form on the website, indicating, if possible, the article of the existing thermos - this will simplify the procedure for selecting a new flask. Of course, a new flask / spare part will cost an order of magnitude less than a new thermos.

However, we sincerely hope that you will not need the information from the last section of the review, and that your best thermos will serve you faithfully for many years.