Review of the best AEG water heaters of 2024

Water heating tanks are excellent helpers in case of problems with hot water supply or even in its absence. Also, water heaters are irreplaceable in summer cottages. When buying a tank, you have to choose: type, method of heating and installation, power, volume, material, method of water supply, control, security level, as well as additional functions and settings.

It will be extremely difficult for a person who does not understand water heating devices not to make mistakes when choosing. A review of the best AEG water heaters will help in choosing, tell you what to look for and guide you on the price.

Selection criteria: how to choose the right hot water tank?

1. Which one is better to buy? It should be noted that not always the best manufacturers, for example, of washing machines, create the best and highest quality water heaters. Therefore, before deciding which company is the best device to buy, you need to consult with a professional, read reviews and carefully study the product description.
2. How much does a quality tank cost? You should not buy inexpensive devices, as in the end, due to the short service life, you will have to purchase a new tank or spend money on repairs, which will ultimately lead to high costs.
   But expensive models should be treated with great attention. After all, the cost does not always depend on the quality. For example, popular models may have a high cost, but their popularity will be so high not because of the high quality of the device, but because of well-thought-out advertising. But with the right approach to the choice, as described above, there is no reason to be afraid to make a mistake in the choice.
   Therefore, it is better to pay attention to a product with an average price, which will ensure quality, and at the same time, the company will not spend money on excessive advertising of its product.

Specifications

Type of water heater

There are 3 types of water heaters: storage, flow and bulk.

1. Cumulative type is a tank that has a different volume and is capable of maintaining a high temperature for a long period.

The storage tank is the best option according to professionals and buyers. This type of water heater will be an excellent assistant with the following selection criteria:

• have access to hot water at several points of the water supply;
• the ability of the device to work well with low water pressure;
• range of water heating from low to high temperature;
• maintain a high temperature for a long time;
• spend a minimum amount of electricity.

2. Flowing type is a tube with an electric heater inside, through which water flows.

If there is no need to heat water to a high temperature, access to hot water at several points of the water supply, then a flow tank will be the best option.

Instantaneous water heaters can be:

• pressure, involves connecting directly to the water supply. This is the optimal principle of operation, since water can be supplied to several points of draw-off;
• unpressurized, has an indirect connection to the water supply. For this, additional devices are used in the form of devices that are equipped with flowing and storage tanks. This principle of operation involves the supply of water to only one point of draw-off.

3. Bulk type Is a container into which you need to pour water manually. Water heating is carried out thanks to the built-in heating element.

Water heating methods

There are 4 heating methods:

• gas - heating occurs from the gas supply;
• electric - this is the classic way of heating from the network;
• indirect - heating comes from heat taken from another source;
• combined - includes electric and indirect heating.

Tank control method

There are electronic and mechanical controls.

By giving preference mechanical method, which is carried out by scrolling the adjustment knob, you get simplicity and ease of operation.

Device with electronic control provides a wide range of management functionality.

Installation and connection method

Fastening is done in 3 ways: vertical, horizontal and floor.

1. Vertical installation assumes mounting the device in an upright position. This is the best installation method since the vertical position of the tank does not reduce the water temperature.
2. AND horizontal installation, in turn, due to the large area, mixes cold and hot water, thereby lowering its temperature.
3. Outdoor way suitable for large water heaters, since another installation simply will not support a lot of weight.

The inlet can be located on the side, top and bottom - depending on the size, shape and installation method of the water heater.

Heating element power

The time spent on heating water directly depends on the power of the heating element.

If a standard power of 1.5 or 2 kW is sufficient for the storage tank, then flow-through devices require from 3.5 to 30 kW.

It is worth considering that by choosing a storage tank with a capacity of up to 8 kW, you will get 3-4 liters of hot water in 1 minute. This is just enough for taking a shower.

Also an important component is wiring. For devices with a power of more than 5 kW, a separate cable led to the panel with a fuse is required.

Which heating element is better?

There are 4 types of heating elements:

1. Spiral heater, not strong, but high efficiency and corrosion resistance.
2. Heat exchanger, this type is rarely used, in water heaters with gas and indirect heating.
3. "Wet" heating element, not protected from corrosion, heats water slowly and is not efficient enough. But in the presence of a magnesium anode and its replacement, it is capable of long service.
4. "Sukhoi" heating element, does not have direct contact with water, as it is protected by a special flask. This reduces the risk of lime scale or corrosion and also allows the water to heat up quickly. The only drawback of dry heating elements is the high price.

Rating of quality water heaters AEG

AEG EWH 50 Slim

The storage tank holds 50 liters of water. With such spaciousness, its width is only 33.8 mm.

It is thanks to the compactness and the ability to mount devices in rooms with a small area that the popularity of the Slim models has increased.

The tubular heating element is made of copper and provides fast heating of water to the required temperature. The water heating range is 5 ° C to 65 ° C.

An enamelled steel tank and a magnesium anode create a tandem for corrosion protection.

There is a built-in reverse action valve and protection against overheating and freezing of the heating element.

The control takes place mechanically by scrolling the adjustment knob.

With the function of indicating the operating mode, it is possible to follow the operating status of the tank.

The AEG EWH 50 Slim is splash and small particle protected to IP 24.

The tank is mounted on the wall, vertically, with a bottom type liner.

• compact, it is possible to install in a small room;
• wide range of water heating;
• high level of protection.

• long period of heating water.

AEG GWH 14 RN

The flow-through column is capable of producing 14 liters of water per minute.

Water is heated with gas. Ignition is performed by pressing a special button. The water temperature is independent of the water pressure, thanks to a modulating heater that regulates the strength of the flame.

The heat exchanger is made of copper and has an aluminum coating.

The AEG GWH 14 RN is equipped with a draft sensor that will shut off the gas supply in the event of draft problems or lack of draft. There is also a thermocouple, which acts to stop the gas supply in case of flame problems.

There is protection against overheating and lack of water, in the form of a hydraulic and safety valve.
The column is wall-mounted vertically, the device is connected at the bottom.

• high power;
• piezo ignition;
• a column with the ability to work on reduced gas;
• flame force regulator;
• presence of a draft sensor, thermocouple;
• protection against overheating and lack or lack of water;
• high-quality assembly.

• lack of water heating indicator.

AEG EWH 100 Basis

The electric storage tank holds 100 liters of water. The water is heated between 30 ° C and 70 ° C.

There is an energy saving mode in which the water will be heated up to 60 ° C. Also, high-quality thermal insulation is provided in the tank, which contributes to additional energy saving.

Water heater protection includes:

• frost protection - protection reacts to low temperatures up to 5 ° C, and automatically
• starts the operation of the tank, in order to avoid serious damage;
• magnesium anode, which is necessary for corrosion protection;
• copper flange - required to protect the heating element;
• safety valve - to protect against high water pressure;
• overheating protection - protection will not allow the heating element to overheat, an automatic shutdown will work.

The indicator will show if the device is currently working.

Wall mounting with bottom piping is done vertically.

• energy saving mode;
• high quality thermal insulation;
• high level of protection against freezing, overheating, corrosion, as well as problems with water pressure.

• not.

AEG EWH 15 Mini

Despite its small size, this model provides enough space for 15 liters of water.

The maximum water heating is possible up to 82 ° C, the minimum - 35 ° C.

In an enamelled storage tank, a copper heating element is installed, with a power of 2 kW.
The mechanical control is clear and simple: using the control knob, the user can select the required heating temperature.

To save energy, the electric tank offers the following:

1. Using Economy Modes:
   - water heating mode at a temperature of 40 ° C;
   - temperature condition 60 ° C.
2. Good thermal insulation, which allows keeping high water temperature for a long time.

Do not be afraid of possible overheating and breakdowns from low water temperatures, since the water heater controls water heating and is protected from freezing.

The electric tank is equipped with over and low water pressure protection. Also has IP 24 protection.
The model is mounted vertically on the wall, with a top liner.

• reliable and high quality material;
• capacious tank;
• high level of protection against splashes and ingress of solid particles on the surface;
• energy saving;
• high-quality thermal insulation;
• easy installation;
• tank with automatic maintenance of the outlet temperature;
• the presence of a check and safety valve;
• protection against freezing, corrosion and overheating.

• not.

AEG EWH 50 Comfort EL

The electric storage-type water heater has 2 "dry" heating elements made of stainless steel, with a capacity of 1.8 kW.

The water heater of this model is equipped with a check valve and a safety valve, as well as a safety connection device.

The minimum temperature for heating water with a volume of 50 liters is 7 ° C, and the maximum temperature is 85 ° C. There is a thermometer.

The manufacturers took care of the thermal insulation of the device, choosing for this a high-quality material - polyurethane foam. The heat insulator will help save energy, moreover, it is safe for human health.

By choosing the self-diagnosis mode, you can learn about possible malfunctions of the device.

Also, an assistant in saving energy are 3 economy modes:

1. Comfort. After a week of using the electric tank with the maximum temperature, it decreases to 60 ° C.
2. Plus. When the tank is 60% filled with water, the heating temperature will be 60 ° C.
3. Dynamic... Smart mode will adjust the heating temperature based on the amount of use.

For maximum convenience, the water heating tank provides the ability to choose 1 of 3 operating modes:

1. Boiler... The selected mode allows you to heat the water to the required temperature in an accelerated mode. After the water is heated, the device will turn off automatically.
2. Single-circuit. Water heating to the required temperature occurs both when choosing standard and fast power.
3. Double-circuit. The water is heated to the required temperature at standard power, taking into account off-peak network loads, as well as the amount of water used.

Protect the built-in magnesium anode from corrosion on the enamel coating. There is also protection against overheating of the device and freezing.

In the lower part of the tank, there is a touchscreen LED-display, with the help of which control is carried out and information is displayed.

The "Comfort" model range has a housing protection against water jets and possible ingress of solid particles.
Installation of an electric boiler is carried out vertically, wall-mounted, with a lower water supply.

• the presence of energy-saving modes;
• convenient to operate;
• easy installation;
• high quality heat-insulating and energy-saving material;
• self-diagnosis of the device;
• protection against corrosion, freezing, overheating, electric shock, low and high water pressure;
• modern design;
• the ability to choose the optimal operating mode;
• durable body;
• multifunctional;
• long warranty;
• protection level IP 25.

• not found.

Attention! This review is not a buying guide, its task is to acquaint the buyer with what kind of tanks there are, what you should pay attention to, how not to make mistakes when choosing, how much a high-quality tank should cost, and whether the high price corresponds to the declared quality. And the final purchase decision is recommended to be made after consultation with a specialist.