Review of the best Zanussi water heaters 2024

Hot water is one of the factors for a comfortable life. Now, in order to wash dishes or bathe in the absence of hot water, you do not need to heat it in a saucepan, special devices will do it for you.

The stores provide a large assortment of water heaters, among which you can choose both popular models and products of little-known brands. There is also a choice in the price category: it can be both budget and medium options, and expensive. One of the popular manufacturers is Zanussi.

How to choose the right water heater, navigate the price and learn about functionality? A review of the best Zanussi water heaters in 2024 will help you not to make mistakes when choosing, tell you which tank is better to buy, how much each model costs and what you should pay attention to first.

Criterias of choice

1. When deciding which company is better to buy a water heating tank, it is worth considering the popularity of the models you like among buyers. This information can be obtained by reading reviews and reviews on the Internet.
2. It is necessary to calculate how much hot water is consumed in the family. Based on the calculations, choose the optimal tank volume.
3. Depending on where the device will be located, and for what purposes it is intended, determine its type, heating method, installation, connection and water supply method.
4. Based on durability, cost and efficiency, choose the optimal heating element.
5. It is necessary to take into account the power consumption of the device, since the method of installing the tank depends on this.
6. Depending on the model, the hot water tank has various additional functions, the importance of which should be noted.

Characteristics of water heating tanks

What types of water heating tanks are

1. Cumulative the type of tank is the most popular among buyers. The device works on the principle of accumulating water in a container and heating it to a certain temperature, followed by its storage. This type of tanks consumes a small amount of electricity, supplies water to all connection points and does not stop working with a low water pressure.
2. Flowing the type of tank heats the water directly at the moment it is turned on using a heating element built into the device. Water heats up quickly, but the maximum heating temperature reaches only 50 ° C. This type is compact, which will not cause problems with installation in a small room. Among the shortcomings, it is worth highlighting the installation of the device at only one point of water supply, taking into account the fact that a special gander or a watering can come with the flow tank.
   Due to the high power of the heating element, the connection may require a direct connection to the panel or a separate power cable.
3. Bulk type of tank - a device that does not depend on the water supply system. Since the filling of the tank with water is done manually from another container. Water is supplied from a built-in tap or watering can.
4. Instant water heating tap combines the work of a mixer and a water heater. The water is heated directly in this small and compact device. The maximum heating temperature is 70 ° C. The disadvantage of the device is the high power consumption.

Heating methods and their description

1. Electric the heating method is carried out from the network using a cord that supplies power to the heating element.
2. Indirect the heating method is only suitable for the storage tank. The water is heated with the help of heat generated by the heating boiler.
3. Combined heating is carried out indirectly and electrically.
4. Gas the heating method is provided for flow and storage type tanks. Heating is carried out using a gas burner, with the combustion energy of natural or bottled gas.

Type of supply and installation of water heating tanks

Tank mounting can be wall or floor.

When mounting the device on the wall, you must take into account its rather large weight. Therefore, the fastening must be of high quality.

Wall mounting can be done in 2 ways:

• horizontal;
• vertical.

The floor-standing unit does not need strong fastening, but it takes up a lot of space. Therefore, this type of installation is suitable for large spaces.

The lead to the tank can be:

• top - suitable for installation in a nightstand;
• bottom - when installed on a wall;
• lateral - in case of a large volume of the device.

Water heating tank volume

When choosing the volume of the water heater, it is necessary to build on the amount of consumed water, residents and the place of installation:

1. If a water heater needs to be installed in a private house, then the best option would be to choose a device from 150 liters.
2. For a large family, a displacement of 100-150 liters is ideal.
3. For a family of no more than 4 people, a 50 or 80 liter water heater is suitable.
4. A water heater less than 30 liters will be sufficient for 1 person.

Types of heating elements

Heating elements are of 2 types: tubular and spiral.

Tubular a heater is a familiar heating element, which can be "wet" or "dry". Their difference lies in the fact that the wet heating element is immersed in water without protection, while the dry heating element has a ceramic or steel enamelled flask that protects it from contact with water. This prevents the formation of limescale, which, in turn, extends the life of the heating element.

Spiral the heater has a high cost and durability.

Water heater material

For the manufacture of the inside of the tank, the following materials are used:

• plastic - the advantage of the material is its low cost, but the quality is poor;
• enamel and glass ceramics - the advantage is that the materials are not subject to corrosion. Their disadvantage is the formation of cracks at temperatures above 60 ° C.
• stainless steel and titanium enamel are the most popular choice of buyers as both materials are strong and durable. Minus - the seams rust over time, but this can be prevented by installing the anode rod inside.

Rating of quality water heaters Zanussi

Zanussi 3-logic 3,5 TS (shower + tap)

Average cost of a model: 2,290 rubles.

Product dimensions: 27x13.5x10 cm, weighing 1.5 kg.

The warranty from the date of purchase is 2 years.

By purchasing this instantaneous water heater of electric type of heating, you will receive in the kit: a shower, a shower holder, a tap, a mount, an instruction manual and a water filter of 4 degrees of protection.

A 3.5 kW water heater is capable of heating water with a volume of 3.7 liters per minute to a maximum temperature of 50 ° C.

Water supply is carried out in a non-pressurized way, with a pressure of 0.70 to 6 atm.

Wall mounting is carried out horizontally, with a bottom type connection.

Please note that a water shut-off valve must be installed only in front of the water heater. This is necessary in order to prevent water pressure on the housing made of plastic. Also, you should not neglect the rules of use: after completing the water procedures, you must turn off the water supply.

Mechanical control of the device is carried out by 3 buttons:

1. The on / off button is at the top.
2. To select modes 1 and 2, you must press the corresponding buttons - I and II.
3. Mode 3 is selected by pressing 2 buttons (I and II) simultaneously.

Optimal mode for using Zanussi 3-logic 3.5 TS - III.

The device has indicators for heating and turning on. Temperature limitation is also possible.
Additional functions include: protection against overheating and switching on without water.

• inexpensive model;
• easy installation;
• convenient to operate;
• compact and roomy.

• not found.

Zanussi ZWH / S 10 MINI U

Average price of a product: 5,190 rubles.

Model dimensions: 32.4x32.4x31.5 cm, weight - 7.5 kg.

The device has a stylish and modern design. The inside of the water heating tank is made of stainless steel with a built-in magnesium anode to prevent possible corrosion of the material.

The storage tank of an electric type of heating and 2 kW of power is capable of heating water with a volume of 10 liters to 75 ° C in 19.2 minutes. The pressure ranges from 1 to 7.50 atm.

The vertical wall unit has a top connection.

The electric tank is controlled mechanically, by scrolling the regulator to select the required mode.

The device has a heating temperature control, built-in eco-mode and 4 degree of protection against water.

• affordable price;
• stylish design;
• the presence of an eco-mode.

• not found.

Zanussi ZWH / S 100 Symphony HD

Average cost of goods: 7 390 rubles.

Dimensions: 45x87.7x45 cm, weighing 28 kg.

Product warranty: 5 years.

An electric heating storage tank with a volume of 100 liters and 1.5 kW of power heats water to a temperature of 75 ° C in 4 hours. The pressure at the inlet to the pressure type boiler is from 0.80 to 5.50 atm.
Wall mounting with bottom piping is vertical.

The control of the enamelled tank is mechanical. There is a temperature limitation, built-in thermometer, heating and switching indicators.

A safety valve and a magnesium anode with increased weight are used as protection. There is also 4 degree water and dust protection.

• acceptable cost;
• simple control;
• pleasant appearance;
• thermal insulation 22 mm;
• high protection against water, dust and scale;
• increased mass of the anode;
• silent work.

• not.

Zanussi ZWH / S 50 Splendore XP

The average cost is: 13 490 rubles.

Device parameters: 43.4x93x25.3 cm, weight - 15.1 kg.

The set with the water heater includes: a warranty, instructions, a residual current device, a mount and a safety valve.

The storage tank with a volume of 50 liters is electrically heated. In 114 minutes, a "wet" heating element of 2 kW of power heats the water up to 75 ° С. At the outlet, the pressure ranges from 0.80 to 6 atm.

Both horizontal and vertical wall mounting with bottom piping is possible.

A smart LED display that displays the temperature for easy and intuitive operation. There is an indication of inclusion and the ability to limit the temperature.

The interior of the Zanussi ZWH / S 50 Splendore XP is made of stainless steel.

Safe use of the device includes the following:

• safety valve;
• 4 degree water protection;
• protection against overheating and switching on without water.

• average cost;
• electronically controlled water heater;
• durable and reliable;
• the possibility of vertical and horizontal mounting;
• the presence of a protective connection device;
• high level of device protection.

• not found.

Zanussi zwh / s 30 Orfeus dh

Average price: 7,990 rubles.

Dimensions: 35x57.5x39.3 cm, weight - 12.1 kg.

The warranty is valid for 5 years.

A storage tank with an electric type of heating and a dry heating element capacity of 1.5 kW, heats 30 liters of water to a temperature of 75 ° C in 97 minutes. The pressure ranges from 0.80 to 7.50 atm.

Installation of the wall type is carried out vertically, the connection to the device is from the bottom.

Mechanical control is easy and understandable. There is an indication of the limitation of the water temperature, indication of inclusion and a built-in thermometer.

Zanussi zwh / s 30 orfeus dh provides the ability to disinfect water, protect it from overheating and turn off the power when there is a lack of water. There is also a magnesium anode, safety and non-return valves.

The lining inside the tank is made of enamel.

• low cost;
• fast heating of water;
• water heater with water disinfection function;
• the presence of a thermometer and a magnesium anode.

• not.

Zanussi ZWH / S 30 Splendore XP 2.0

Average cost of goods: 11,890 rubles.

Parameters: 43.4x60x25.3 cm, weight - 10.8 kg.

Warranty period: 8 years.

Electric storage tank with a volume of 30 liters and 2 kW of power consumption, heats water to a maximum temperature in 90 minutes.

The water heater is very convenient due to its versatile installation method and compactness. Lower type eyeliner is used.

On the electronic display, you can set the optimal temperature.

The on indicator, water temperature limitation and a thermometer are working, which will tell you the heating temperature at the moment.

Residual current device, safety valve, antibacterial water disinfection and anti-freeze protection ensure the safe use of the electric tank. And the stainless steel coating will prolong the safe use for a long time.

It is worth highlighting that the water heater is able to store heated water for a long time.

• moderate cost;
• fast heating of water;
• high heat retention rate;
• the presence of a thermometer;
• antibacterial water disinfection;
• freeze prevention mode;
• universal installation method;
• the presence of a protective connection device.

• not found.

Zanussi GWH 10 Fonte Glass La Spezia

The average cost of a product is 7 390 rubles.

Device parameters: 33x55x19.1 cm, weight - 10.2 kg.

Warranty: 2 years.

Zanussi GWH 10 Fonte Glass La Spezia, has an interesting pattern that will certainly fit into the kitchen design.

A flow-through gas device with a capacity of 10 liters per minute has a thermal power of 20 kW. The pressure is from 0.15 to 8 atm.

The combustion chamber of the column is of an open type, the chimney is 11 cm. Electric ignition is carried out using batteries. It is worth noting that the batteries can last a year without replacement.

Wall mounting is carried out vertically with bottom piping.

The device is controlled mechanically, using 2 levers, one of which regulates the power, and the other - the temperature.

The display can monitor the temperature of the water. There is also a thermometer, heating and power indicators. Overheating protection works for safety.

• unusual appearance;
• affordable price;
• electric ignition using batteries;
• overheating protection;
• built-in display;
• built-in thermometer.

• not found.

Zanussi ZWH / S 50 Smalto DL

Average cost: 14 490 rubles.

Dimensions: 47x86x25 cm, weight - 25.86 kg.

The warranty is 8 years.

A 2 kW electric storage water heater heats 50 liters of water to a temperature of 75 ° C in 96 minutes. The pressure at the inlet of the tank is from 0.80 to 6 atm.

This range is distinguished by the presence of 2 enamelled inner tanks.
Wall installation is carried out both vertically and horizontally, with bottom piping.

Mechanical control is easy and understandable. Information about the water temperature can be seen on the display.
There is an indication of heating and switching on, limitation of water heating and a built-in thermometer.

It should be noted that the water heater retains heat for a long time.
Protection against overheating and switching on an empty tank, a safety valve, a magnesium anode, a residual current device and protection against water of the 4th degree, create a high level of consumer protection.

• good price;
• long warranty;
• 2 internal tanks;
• multifunctional;
• vertical or horizontal installation to choose from;
• built-in thermometer;
• long-term preservation of heat;
• with automatic maintenance of the outlet temperature;
• ease of use;
• high quality material;
• high level of safety in use.

• not.

After reading a review of the best Zanussi water heaters, you can easily choose the best one for yourself. Attention! The above information is not a buying guide. For any advice, you should contact the specialists!