Rating of the best obstetric and gynecological chairs for 2024

Every woman needs to visit a gynecologist twice a year for prevention purposes. A preventive examination will help to avoid the appearance of unpleasant diseases, the development of infection or eliminate them in the early stages. For many, this procedure causes discomfort, embarrassment and fear. Some women postpone visiting a doctor, even with obvious symptoms of the disease. In order for a visit to this specialist to proceed in a comfortable environment, not only a highly qualified doctor is required, but also a comfortable gynecological chair. A good chair will help to relax the patient and create optimal conditions for the examination.

Types of gynecological chairs

Although outwardly all types of products are quite similar, each of them has its own design features. Particular attention should be paid to ways of regulating the patient's position, as well as the presence of additional features that will create comfortable conditions for the client.

Mechanically adjustable devices are designed for multi-stage changes in the dorsal and pelvic regions, as well as the height of the chair itself. Usually, mechanical chairs have two levers, with the help of which the height and angle of the backrest are adjusted. This version of the equipment is robust and durable, and it can also withstand very heavy patients. But manipulations to adjust the parameters of the chair cannot be carried out after the patient has landed. Usually, the gynecologist pre-sets the optimal parameters that will be convenient for any patient.

The second type of obstetric and gynecological chairs works by means of a gas spring. This option is a pneumatic device that runs on gas energy. To change the position of the patient, you do not have to make additional efforts, as well as there will be a smooth movement, without sudden movements. But such a mechanism can quickly fail. This is due to low-quality cartridges. As a result, the back of the chair cannot be adjusted; it will constantly recline to the floor. There will be no further work with such a chair. It should be noted that work can be restored if the spring is replaced. But it must be specially made for the chair of this brand, have the same parameters as the damaged spring. Unfortunately, a damaged spring cannot be repaired.

The third type includes devices with hydraulic control. The hydraulic structure is large and heavy. The piston is installed under the seat and can be used to adjust the seat height. Such a device is quite difficult to operate and maintain, since fluid leaks often occur due to high pressure. Currently, chairs with such a system are almost never used.

Modern gynecological chairs are equipped with an electric drive, which is an electric motor connected to an adjustable part.In such chairs, it is possible to adjust not only the height or angle of the backrest, but also the change in the pelvic section. The most common drives are from German and Danish manufacturers; in case of breakdown, it is easy to find spare parts for them.

Requirements for obstetric and gynecological chairs

Since with the help of this device the gynecologist will not only examine the patients, but also perform certain manipulations and even surgical interventions, then when choosing, certain parameters must be taken into account. Taking into account all the nuances, comfortable conditions will be created for both the patient and the doctor.

First you need to pay attention to what height the product can be lowered and raised. How low it can go affects how quickly and easily a client can settle on it. And the maximum height requires for the convenience of operations or inspection.

The size of the chair plays an important role in choosing a particular model. Large dimensions in a small office will create inconvenience in performing certain manipulations. But also the back and pelvic section should not be too small, otherwise women with high body weight or wide pelvis will be uncomfortable during the examination. In addition to the dimensions, the weight of the device itself should be noted. Chairs with an electric drive are heavy, this will not make it possible to move it while cleaning the room. To facilitate this task, it is better to take armchairs with wheels.

It should be taken into account how much weight this gynecological equipment can withstand. Many models have a maximum load capacity of 100 kilograms. Proceeding from this, it is impossible to receive patients with overweight. Also, given the constant loads, such devices will quickly fail.

If you want the equipment you have chosen to serve you for more than one year, then you should also look at the material for making the components. For example, plastic leg holders will quickly become unusable with frequent admission of patients with considerable weight, and there are a lot of them in our country. It will not be possible to replace this design as they are not sold separately. Therefore, it is better to give preference to a foot holder with a metal base. A good addition would be the ability to adjust the height and angle of this part. To create comfortable conditions for the examined women, it is desirable to have armrests. With their help, it will be more convenient for them to climb, but their presence is not necessary.

Also pay attention to the quality of the covering material. The chair will be used every day, after each patient it is necessary to treat it with chemicals, and a UV lamp will also work in the office. These factors affect the appearance of the device. After such constant exposure, cheap leatherette skin will quickly lose its presentable appearance, and after a while it may begin to tear, which will require its complete replacement.

The best obstetric and gynecological chairs

KG-3M

This gynecological equipment has a non-separable structure. The seat height is fixed and cannot be adjusted in height. The angle of inclination of the backrest and pelvic section is regulated by means of gas springs. The backrest can be adjusted from 20 to 100 degrees from the horizontal, and the pelvic section from 0 to 20 degrees from the horizontal. It is possible to set the "Trendelenburg" position, which is necessary for carrying out certain operations in the pelvic region. The footrests are securely attached to the base of the chair and can be folded back if necessary. The upholstery of the chair is made of vinyl-leather and has no seams. Under the cover there is 40 mm thick polyurethane foam. The tool tray is made of stainless steel.

For the convenience of cleaning the office and moving the chair, there are two wheels, and for stability there are two supports, one of which can be adjusted.

The length in full horizontal position of the back and seat is 128 cm.The width of the pelvic section is 50 cm, and its height is 90 cm. The weight of the KG-3M without packaging is 44 kg. The permissible lifting capacity is 180 kg.

The average cost is 35,000 rubles.

• Convenient adjustment of the back and seat;
• High lifting capacity;
• High-quality cladding;
• The presence of wheels and support.

• Height is not adjustable;
• The gas spring can come out of the standing position.

KSG-02e

This product is suitable for examining patients, as well as for carrying out medical procedures. The main frame is made of steel, the top is covered with a protective polymer powder. The cover is made of soft leatherette using seamless technology. The armrests and footrests are also covered with this material. The height of the chair is adjusted by means of an electric foot drive, and the inclination of the backrest and pelvic section by means of a gas spring. The backrest can be tilted from 0 to 80 degrees, and the pelvic section can be from 0 to 30 degrees. With the help of convenient handles, you can adjust the footrests, it is possible to change the height and angle of inclination. In addition, the height of the armrests can be adjusted, the required position is fixed with a screw. The chair is installed on support legs, does not have wheels.

This equipment should be cleaned with a diluted detergent containing hydrogen peroxide. The use of strong chemicals is not recommended as they can damage the upholstery. You should also periodically inspect threaded connections. When loosening, tighten them with a wrench.

The length of the chair is 122 cm, the width is 74 cm, the maximum height is 96 cm. The maximum permissible load is 160 kg. Equipment weight does not exceed 55 kg.

The average cost is 58,000 rubles.

• Convenient chair height adjustment;
• Adjustment of Heppel's stands with convenient handles;
• Seamless sheathing;
• The product is delivered assembled.

• The equipment does not have casters.

KGe-410 MSK

This model has a universal purpose. It is suitable for gynecological, urological and proctological examinations and procedures. The main frame of "KGe-410 MSK" is made of steel alloy, covered with protective powder paint on top. During operation, it will not crack and chip, and it is also completely safe. The soft parts of the equipment have a foam rubber layer and are upholstered with soft leatherette.

The height of "KGe-410 MSK" and its headrest is regulated by an electric drive. The backrest inclination is changed by means of a pneumatic spring. The tilt angle can be from 0 to 60 degrees. The angle of inclination of the seat is changed by means of the Rostomat mechanism from 0 to 15 degrees. The base of the footrest is made of metal and has handles for adjusting the height and angle.

The dimensions of "KGe-410 MSC" in the position of the chair have dimensions of 125 * 74 * 165 cm, and in the position of the table - 175 * 74 * 109 cm. The height of the seat can be 48-90 cm. The weight of the product is 85 kg. The maximum patient weight allowed is 120 kg.

The average cost is 86,000 rubles.

• Convenient adjustment of the height of the equipment, as well as of the product sections;
• The upholstery material is resistant to wear and tear and does not cause allergies;
• Strong base frame that can withstand heavy loads.

• Installed on support legs, does not have wheels;
• It has no armrests.

Kge-3415 MSC

"Kge-3415 MSC" is intended for gynecological and urological examinations and procedures. The frame and frames of the additional parts are made of steel pipes. External metal parts are coated with epoxy paint, which is resistant to mechanical stress and detergents. It is also non-toxic and fireproof. The soft part of the product has a vinyl leather upholstery and a foam layer that creates a comfortable environment for the patient. The base of the chair is mounted on two supports and two castors without brakes.

The lifting and lowering of the equipment is carried out using an electric drive, which operates from a pedal.Adjustment of the angle of inclination of the backrest and pelvic section is also changed by means of an electric drive. The backrest can be tilted from 0 to 60 degrees, and the seat can be tilted from 0 to 20 degrees. You can also adjust the inclination of the headrest from -20 to 20 degrees, the changes are carried out using a pneumatic spring.

The length in the "table" position is 150 cm, in the "chair" position - 112 cm. The width of the Kge-3415 MSC is 62 cm. The maximum seat height is 90 cm. The weight of the product is 85 kg. The maximum lifting capacity is 120 kg.

The average cost is 120,000 rubles.

• Regulation of the position of the components and the height of the chair is carried out using an electric drive;
• Strong frame;
• External metal parts are coated with powder paint, which is resistant to external mechanical stress;
• Collapsible design.

• Not.

Belberg 03

This device for gynecological examination and manipulation from a German manufacturer. Height adjustment has a smooth stepless stroke, which is carried out using the control panel. The angle of inclination of the backrest and seat is changed using a linkage mechanism. The angle of inclination of the backrest from the horizontal can be from -20 to 80 degrees, and the inclination of the seat can be from 0 to 20 degrees from the horizontal. The base frame is made of powder coated steel. The casing is made of eco-leather with a 50 mm thick polyurethane foam layer. This finish is highly durable and can withstand disinfectant treatment. The arms and legs are made of steel profiles and are chrome-plated.

The length of the product in the "chair" position is 112 cm, in the "table" position, including the leg panel, it is 166 cm. The width of the Belberg 03 is 94.5 cm. The weight of the device is 90 kg. Maximum lifting capacity 170 kg.

The average cost is 113,000 rubles.

• Height adjustments using the control panel;
• Wear-resistant casing;
• Removable arm and leg supports;
• The Heppel support stock has removable covers.

• Not.

Armed SZ-II

A distinctive feature of this model is the ability to operate with a remote control or an electric pedal, as well as the ability to install additional equipment. The electric drive adjusts not only the height of the product, but also the positions of the dorsal and pelvic sections, and also sets the Trendelenburg position. Such possibilities create comfort for the patient and convenience for the doctor. The casing is made of a soft material that is resistant to wear and tear or disinfectants. The frame of the product is made of durable metal, which has a coating that protects against corrosion.

It is also worth noting that the design of the chair is made taking into account the peculiarities of the structure of the human body, which makes the product ergonomic and convenient to use. There is a swivel stand that allows you to place the colposcope. The leg supports have a metal base with adjustable height and tilt angle.

The length of "Armed SZ-II" is 187 cm, width - 94 cm. The maximum load weight can be up to 150 kg. Weight of "Armed SZ-II" without packaging is 135 kg.

The average cost is 165,000 rubles.

• Possibility of adjusting the product using a pedal or control panel;
• The frame is made of durable metal;
• Sheathing material is wear-resistant;
• Two color options;
• Ergonomic design.

• High price.

Conclusion

Nowadays, the medical equipment market presents a large selection of products for the gynecological office. When choosing a particular model, one should consider the convenience for both the patient and the doctor. Also, a positive moment will be the fact that if it is possible to supplement the chair with the necessary gynecological equipment, this will create not only comfortable conditions, but also reduce the time of appointment.