Ranking of the best car holders for smartphones in 2024

Everyone knows that while driving a car, it is dangerous to be distracted from the road, and with the advent of modern gadgets, smartphones, navigators and tablets, you still have to be distracted. To minimize the time that the driver spends on distraction from the road (for example, to check with the navigator), special car holders for smartphones have been created. Such holders are usually attached to the dashboard - thanks to this, lateral vision is enough in order to periodically observe the device, and not focus all your attention on its display. In addition, the securely fixed device will not fall while the vehicle is moving.

Pros and cons of different types of holders

Holders for mobile devices have various types of mounts that allow devices to be mounted on the dashboard, on the windshield, on the in-car rear-view mirror and even on the steering wheel. According to the method of fastening, the holders have the following varieties:

• silicone mat with a sticky surface;
• clips attached to the ventilation deflector;
• steering wheel strap;
• magnetic holder;
• mount in a cd-player;
• suction cup bracket.

Velcro mat

• the device can be positioned at a certain angle;
• some designs allow you to charge your smartphone through a special adapter.

• not very secure mount.

Air vent grille mount

• affordable cost;
• compact dimensions;
• reliability;
• allows you to place the device close to the driver;
• simplicity and convenience.

• may not be attached to every lattice;
• blocks one of the ventilation channels;
• the smartphone is exposed to a stream of air, including hot air (when the stove is on).

Handlebar strap

• smartphone as close to the driver as possible.

• the inability to charge the phone while it is attached to the steering wheel;
• the device partially overlaps the instrument panel;
• with intensive rotation of the steering wheel, the device will interfere.

Magnetic mount

• the convenience of use;
• compactness;
• many options for placements;
• nice design;
• versatility - you can mount tablets and navigators.

• overcharge;
• the need to attach a magnetic disk to the device.

Mount in a cd player

• smartphone in front of your eyes;
• does not interfere with the view

• inconvenience when working with an auto player.

Suction cup

• the suction cup is securely attached to the windshield;
• versatility;
• the most common way;
• cheap and inexpensive models;
• the convenience of use.

• low degree of reliability;
• difficult installation;
• poorly holds gadgets heavy by weight;
• on a rough surface the Velcro sticks worse.

Which smartphone holder should you choose?

Good quality usually means high cost, but a truly high-quality device is reliable and easy to use. Such devices are produced by well-known companies, constantly improving their products, introducing the latest developments. The most popular are firms such as:

• Belkin International - for large devices and rough roads;
• iOttie - for CD slot
• Kenu - compact holders for small smartphones;
• Nite Ize - neat, not bulky designs;
• Onetto - for devices with a lot of weight, as well as for quiet city driving;
• Ppyple - for line-of-sight installation of the gadget, as well as for aggressive driving.

Review of the best car holders for smartphones

This list includes the devices that are the best in quality, design, mounting method and customer reviews, as well as the most popular holders from AliExpress.

Baseus Magnetic Car Holder

Inexpensive and in high demand magnetic holder. The material of construction is aluminum alloy, the color of most of the models is black, and the design is strict. The main advantage of the holder lies in its versatility - it is compatible with all-sized devices, in addition, it is compact and has an aesthetic discreet appearance. The design is made in such a way that the gadget can be installed at any angle, and all buttons, ports and connectors of the smartphone remain accessible, including for the charger. The average price is 290 rubles.

• reliable fixation;
• compactness;
• model budget;
• the possibility of recharging;
• compatible with any smartphone.

• not found.

Orico CSP1

Multifunctional holder, which is a universal soft and flexible Velcro pad, equipped with bumpers for secure fixation of the smartphone. It is easily installed on the dashboard and is able to fix the device both horizontally and vertically. The dimensions of the holder allow you to place not only a smartphone, but also a medium-sized tablet. The surface of the structure adheres perfectly and does not slip, leaving no marks. The average cost of the device is 480 rubles.

• easy to wash with plain water;
• does not deteriorate from temperature changes;
• versatility;
• simplicity of design;
• affordable price.

• the holder is designed to hold thin devices.

Ppyple Dash-N5

A popular, inexpensive suction cup holder that allows you to place your smartphone wherever the driver is comfortable - on the windshield or on the dashboard. Despite the modest cost, the holder design is robust and reliable, and the case has a modern and attractive appearance. The model is available in black, white and glossy finish.

To improve the fixation of the device, the holder is equipped with a back panel that reduces vibration during shaking. As for the fastening of the holder itself, it is secure, thanks to a vacuum suction cup that adheres firmly to the plastic surface and glass. To dismantle the holder, a special lever is provided that allows you to detach the suction cup from the surface. The maximum size of the device that can be placed in the holder is 5.5 inches. The average price of the model is 990 rubles.

• easy installation and dismantling;
• nice design;
• reliability of fixing the device;
• affordable price;
• compactness;
• there are no traces of the suction cup on the surface.

• not found.

YNMIWEI Universal

The design of this model is distinguished by its originality and good build quality.YNMIWEI Universal is designed to be mounted on car seat headrest mountings, and the telescopic bar is installed between the seats - thanks to this, the device is easy to set up, move along the bar and fix in a comfortable position. The average price on AliExpress is 1,300 rubles.

• holds the smartphone securely;
• fits all headrests;
• the ability to rotate;
• does not scratch the fixed phone or tablet;
• high quality construction.

• not found.

Onetto Vent Mount Easy One Touch

Practical and with a nice modern design, the holder from the Korean manufacturer of auto accessories. Easily installed on the deflector grill, dismantling the device is just as easy, if desired, the holder can be removed from the grill. The design of the bracket allows you to choose the desired angle of rotation. Onetto Vent Mount Easy One Touch is versatile and suitable for fixing not only a smartphone, but also a tablet: the clips on the sides of the structure can be extended by a distance of 9 cm.

Inside, the clamps are equipped with rubber pads that securely fix the device, even during aggressive driving. An important advantage of this model of holders is the presence of a back wall that protects the smartphone from the flow of air from the ventilation, so that the battery does not overheat. The maximum carrying capacity of the device is 250 g. The average cost of the model is 1,250 rubles.

• the ability to choose any angle of rotation of the bracket;
• versatility;
• the presence of a protective back panel;
• good vibration absorption;
• sturdy construction.

• not found.

TETRAX SMART

Model of a magnetic holder from an Italian manufacturer, which has not only excellent practical properties, but also an original design that can decorate the car interior. The holder can be installed on the air duct grille as well as on the dashboard. The device holds the smartphone using special magnetic strips placed in the center of the structure. The holder itself is firmly fixed on the surface and does not fall off when shaken. TETRAX SMART is designed for smartphones and tablets (up to 7 inches), as well as for a maximum weight of 300 g. The average cost of the model is 1,400 rubles.

• nice, non-standard design;
• versatility;
• reliability and strength of construction materials.

• holds on the dashboard worse than on the duct.

Kenu airframe

Holder for installation on the air intake grille - installation is carried out using a special clip that firmly holds the holder structure in place. In addition, the device is equipped with a movable arm that allows you to adjust the viewing angle and achieve the necessary comfort.

It should be noted that the design of this model is made of three types of material. So, the inner side of the clips is equipped with wear-resistant rubber for a more reliable hold of the device. The base of the structure is made of stainless steel, which means high reliability and low sensitivity to shocks. At the same time, the outer casing of the holder is made of high quality plastic. The average cost is 1,490 rubles.

• high quality of the entire structure;
• modern stylish design;
• compact dimensions;
• strong and reliable fixation of the device;
• the ability to tilt the bracket 90 degrees;
• versatility - the device is suitable for any type of ventilation grill;
• the ability to rotate 360 ​​degrees.

• poorly suited for wide smartphones.

Onetto Mount Easy One Touch 2

A versatile suction cup that attaches firmly to any type of surface, including texture. A feature of this model is its unusual design - the device is made in a futuristic style that attracts with its ultra-modernity and originality.Due to the presence of settings and an expanded range of capabilities, the device can be called multifunctional. Onetto Mount Easy One Touch 2 is equipped with a telescopic tube on which the holder itself is located: the tube extends forward 6 centimeters, allowing for better visibility.

In addition, the device can be positioned at any desired angle, as well as at any convenient height. These features and capabilities make the holder ideal for vehicles with a deep dashboard, such as a truck or SUV. In addition, the fixation of the device guarantees its stability during any kind of ride, including over bumps. The average price of the device is 1 600 rubles.

• the presence of an extension tube;
• multifunctionality;
• reliability and durability;
• durable mount;
• original design;
• versatility.

• bulkiness;
• high price.

Scosche MagicMount Dash / Window

Simple and effective model of magnetic car smartphone holder. Equipped with a vacuum suction cup, thanks to which the device can be easily attached to the windshield or dashboard. The surface of the suction cup is impregnated with adhesive to ensure that the structure is securely held in place. The design is characterized by restraint and stylish simplicity.

To fix the smartphone, you need to attach a special film with magnetic properties to it. The magnet is powerful enough to hold your phone stably while driving and shaking. The design allows you to charge the smartphone battery while driving, for which the holder is equipped with a small hook to hold the charger cable. The average cost is 1,790 rubles.

• ultra-reliable suction cup mount;
• suitable for installation on any surface;
• the kit includes an additional magnetic tape;
• ease of use;
• guaranteed reliability of fixing the device.

• the risk of demagnetizing devices with a hard disk;
• in severe frost, the material of the suction cup hardens and deteriorates;
• high price.

How to Choose the Best Smartphone Car Holder?

When choosing a holder for a phone in their car, each customer is guided by their personal preferences, needs and desires. However, it will not be superfluous to familiarize yourself with the information on each option in detail, so that later you can easily choose the one that will be the most convenient, functional and reliable.

It is worth considering the most important criteria for choosing a device, as well as the parameters that it should have.

1. Mounting method. Perhaps the most important factor that car owners take into account in the first place. The type of fastening determines the reliability of fixing a smartphone or other gadget, as well as the possibility of its location in the most convenient place for the driver in the cabin. It should be borne in mind that a holder with a suction cup, which is often installed on the glass, is not very convenient when the windshield is tilted too much. The magnetic holder does not always hold the smartphone stably when driving over bumps, so it is more designed for driving on smooth roads. Sticky rugs keep both the phone and small items close at hand. And the holders, mounted on the air intake grille, have a powerful lock that reliably holds the device in any kind of ride.
2. Reliability of fastening. A good holder should not only fix the mobile device, but in turn be firmly attached to any surface.
3. Mobility. The mount of the holder should be flexible, providing the ability to adjust the viewing angle - this will allow the driver to easily observe the screen of the device and not be distracted from the road. The presence of viewing angle settings make it possible to create a comfortable environment.
4. Dimensions of the smartphone.It is best to choose a holder designed for a specific device model, or opt for a universal holder with expanding lugs - this function will allow you to place a smartphone of any size or even a tablet.
5. Appearance and design. This parameter depends entirely on the taste of the car owner, so the only factor that should be taken into account is the not too bright appearance of the holder: flashy colors can become an annoying stain that distracts from the road.
6. Availability of additional parameters. Many devices are equipped with accessories for maximum comfort. Such additions include a headset, connectors for charging the phone, additional fastening parts. The presence of such parameters makes it possible to fully use the capabilities of the smartphone, charge the battery while driving.

A good, reliable gadget holder should meet the following requirements:

• to provide a strong and stable fixation of the smartphone or other device in the position that the driver needs;
• make it possible to operate the phone with one hand, including quickly putting it on or taking it off the holder;
• have high quality materials of construction;
• provide free access to all main ports and connectors of a smartphone or tablet;
• do not obstruct the view and do not distract from the road and vehicle control;
• have a design that matches the interior of the car;
• have an affordable cost corresponding to quality.

As for the manufacturers of car accessories, they must have a good reputation, and their products must be reliable and have positive reviews.

Technologies are constantly improving, developing, smartphones and tablets have firmly occupied the space in human life, making it possible not only to be always in touch, but also to use convenient and useful applications such as navigation programs. All this requires making changes in the usual way of life, buying special holders for smartphones. The modern car accessories market offers a large selection of holders suitable for any device and allowing you to enjoy all the multimedia features while driving.