Rating of the best car lifts for car service for 2024

The lift supports the car being repaired in order to facilitate the work of the mechanic. It also saves space in a car service or garage. It can raise the machine to any required height, so that it is convenient to work with units located at the bottom or under the bottom of the vehicle.

Description

Installation for a car is a simple structure, which includes:

• support system;
• drive mechanism.

Used to raise the machine to the desired height and hold it in that position for a long time. This allows you to carry out work on its repair and survey. Platform variants are equipped with additional functionality, which makes it possible to use it as a stand base to adjust the wheel alignment angles.

Basic types

What kind of vehicle lifts are there? If we review the proposed popular models, then all of them can be divided into two groups, depending on the drives used in the manufacture:

View	Description
Electrohydraulic	Power transmission occurs through the use of a hydraulic cylinder with a pump.
Electromechanical	A helical transmission is used, in which mechanical energy is transformed into axial movement. Energy is generated by an electric motor.

Lifts can also be:

• stationary or mobile;
• have different lifting heights;
• have different functionality;
• be inexpensive and at a high cost;
• have different carrying capacity;
• with various structural elements;
• with a function for lifting trucks and cars.

Considering their design features, the devices are divided into four main groups:

1. Single column. It has the following elements: vertical post, horizontal support, horizontal frame. The advantages include compactness. They can be stationary and mobile. Carrying capacity is insignificant - up to 2.5 tons. Designed for the repair of passenger cars and some models of SUVs.
2. Two-post. Stationary device designed for lifting machines up to 5 tons. The main disadvantage is that it can only be installed on a certain surface, which must be durable, made of high quality concrete. Universal models are produced for service stations and allow you to raise a car to a height of two meters. They are quite in demand due to their versatility.
3. Four-post. Consists of 4 racks and 2 platforms. Used for the repair of vans and light trucks.The positive qualities include convenience, quick lifting and reliability.
4. Scissor. They are used in conjunction with other equipment to perform a number of works to bring the machine into proper condition. The average price is too high but worth it. The positive aspects include the ability to mount the structure on any horizontal surface, including not ideal, and the maximum smoothness of lifting.
5. Plunger. The most modern car lift. Differs in ease of maintenance and finding power mechanisms below floor level. Belongs to the category of the best devices that allow work from all sides. The positive qualities include the saving of free space and a long operational life.

Specifications

Currently, car service owners are trying to purchase electromechanical-type lifts for service stations, which, with the same carrying capacity, are somewhat cheaper than their counterparts. But in practice it turns out that it costs a lot of money to repair such a device in the event of a breakdown. This is due to the need to dismantle all lift racks in order to carry out repair work, such as:

• replace working nuts, carriage sliders or rollers;
• adjust chain synchronization;
• replace the screw on the carriage.

Sometimes the cost of restoring the device to work reaches 50% of its original price. Therefore, before deciding on a specific product, you should look at popular models, decide on the best manufacturers, view the rating of quality equipment, familiarize yourself with the functions, pay attention to reviews. You should not make mistakes when choosing, as this can hurt the image and pocket of the owner of the service station.

If you follow the recommendations of experts, then it is best to give preference to this type of product, such as electro-hydraulic. Products are produced in the following versions: plunger, scissor, two-column, four-column. They have the following positive qualities:

• racks are not subject to mechanical beating;
• you can lower the car on the floor even if there is no power in the network;
• the speed of lifting and lowering is significant;
• budget models are produced;
• high quality workmanship;
• manufacturer's warranty;
• post-warranty service is provided;
• the cost of the annual warranty service does not exceed 5% of the original cost of the goods;
• reliability;
• long service life.

How to choose

What should you pay attention to when choosing a product? What matters is how much it costs. However, this is not the only, and by no means, not the main selection criterion. Any product has technical characteristics, both essential and not very. Decisive in the choice should be considered:

• indicators of power supply of both the pumping station and the drive;
• maximum loading capacity of the installation;
• refers to a mobile or stationary type;
• Does the package include additional equipment that significantly expands the existing functionality;
• dimensions in working and non-working condition.

It should be borne in mind that for a car service with small rooms it is better to buy a scissor lift, the installation of which is carried out in the recesses of the floor, which significantly reduces the occupied free space in the box.

According to buyers, the following are insignificant qualities:

• additional equipment of equipment with plumbing tools;
• what color of lamps and lift posts;
• what the transport packaging looks like;
• Does the product lead the rating of the best models of the current year
• how popular the brand of products is.

All these indicators can significantly affect the price of a product, but not improve its functionality and consumer properties.

Which company to buy products and where to buy them? There is no definite answer to these questions. It all depends on the preferences of the potential buyer and his financial condition.There are several options for becoming the owner of this type of product:

• visit a specialized store and choose the model of interest;
• order online in the online store, saving a little money;
• make a lift with your own hands.

Let us dwell on the last option in more detail. The design is not particularly difficult, therefore, if you have small skills, the necessary equipment and tools, free time and desire, you can make it yourself. As an example, let's take a screw car lift and consider the step-by-step instructions for making it yourself.

First, let's define the main characteristics of such devices. Their carrying capacity varies from 1.5 to 14 tons. The unit is equipped with one, two, four or six posts. Let's dwell on the two-post version. Its main structural elements are as follows:

• racks - 2 pieces;
• crossbar;
• screws;
• nuts;
• electric motor;
• pickups;
• bearings;
• anchors;
• chain transmission.

Required materials for manufacturing:

• hydraulic rods;
• compressor;
• hydraulic cylinders - 2 pieces.

As for an electric motor with a gearbox and a shaft, such parts can be purchased at an exchange point, where used elements are handed over, and new ones are obtained with a surcharge. Decide on the load diagram and complete the drawing. It must be accurate and verified. In full accordance with the drawing, make the structure. Make sure it is reliable and safe. Equip it with a lead screw to move the corner with picks. Fit the motor and gearbox. How to install the unit? Anchor the finished equipment to the floor. Before starting operation, make sure that it is strong and reliable. If you have any difficulties, seek advice from craftsmen who have already made such products.

Rating of the best car lifts for car service for 2024

Single column

A good choice for small car services. Its main advantage is that it is very compact and does not take up much free space in a small box, where only a couple of cars can be repaired at the same time. Its main purpose is to create the ability to conveniently approach the car in order to quickly eliminate breakdowns. An auto locksmith must have access to all components and mechanisms.

PP-1-01, mobile, capacity 1 t

It is used for its intended purpose in individual garages, small service stations, tire changers, boxes for the repair of cars and minibuses with a maximum carrying capacity of 2 tons. Refers to a mobile type. Lifts the car on one side by the wheels or sills. Main structural elements:

• rack;
• electromechanical drive;
• the carriage is movable;
• cargo screw;
• nuts;
• switch;
• electronic control unit;
• portable control panel.

The package also includes a safety stand and special pickups. The unit with dimensions of 1060 x 720 x 1260 mm and weighing 130 kg is moved manually, operates at a voltage of 360 V. The time for lifting the car to the maximum height is 30 seconds.

The product can be purchased at an affordable price - 94,400 rubles.

• convenient;
• small dimensions;
• light weight;
• reliable;
• long service life.

• not installed.

Monolift 1200 (Werther-OMA 478 C)

An electromechanical monocolumn with a maximum carrying capacity of 1200 kg has platform dimensions of 2190 x 300 x 60 mm and weighs 480 kg. It can be used both for lifting cars and motor vehicles. Equipped with a 2.6 kW electric motor. The machine is lifted to a maximum height of 1.8 m in 55 seconds. Often purchased for medium-sized garages.

The average price is 319,000 rubles.

• platforms can be adjusted in width;
• an electromechanical device will protect the unit from falling;
• equipped with a safety nut;
• there is automatic lubrication;
• anti-corrosion protection is provided.

• significant were not identified.

PM-750, mobile, capacity 750 kg

Thanks to it, it is possible to tilt or lift passenger cars with a maximum weight of up to 1.5 tons for the purpose of their repair and maintenance. Rises both the wheel and the threshold. For this, a rubberized metal lining is provided. Scope of application - car services, body shops, car dealerships, individual boxes, where a small area is allocated for the repair area. It takes 50 seconds for a maximum lift height of 90 cm. The unit weighs 71 kg and has dimensions of 774 x 716 x 1235 mm. Available with both manual and mechanical drive. It functions at temperatures from -35 to + 45 degrees.

The average price is 67,500 rubles.

• compact;
• reliable;
• durable;
• easy to use;
• Excellent value for money and quality.

• significant were not found.

Nassbaum 1.20 S

It is very suitable for those who cannot allocate a lot of free space for car repairs. The German manufacturer guaranteed the reliability and safety of his brainchild. The carrying capacity of the device is 2 tons, the motor is 2.2 kW, the sufficient voltage in the network is 380 V.

The average cost is 640,000 rubles.

• there are no significant requirements for the foundation;
• the ability to access the car from one side;
• controlled by a rack-mounted console;
• bearing nut material - nylatron, characterized by high quality and durability;
• works almost silently.

• will not work if there is a problem with the power supply.

ММ25 (ОМА 496), capacity 2.5 t

An electro-hydraulic mobile lift from an Italian manufacturer is of excellent quality, reliability and durability. It is purchased for locksmith and body shops, boxes for tire service. Can be installed both outdoors and indoors. The car is seized by both body and mechanical elements. There is a safety nut, anti-corrosion protection.

The product can be purchased at a price of 513,000 rubles.

• easy to use;
• takes up a little free space;
• made of high quality material;
• there is a protective device against falling;
• long service life.

• significant were not found.

Two-column

Refers to expensive and reliable garage equipment. Differs in durability and ease of maintenance. Easy to install and can be used to lift almost any vehicle. They are electro-hydraulic and electromechanical. It differs from the previous type in greater reliability and stability, as well as in cost, which is much higher. Columns can be positioned both symmetrically and asymmetrically. It has different carrying capacity.

SCT6140 Bottom Sync

The electro-hydraulic model has a maximum lifting capacity of 4 tons and can lift the machine to a height of 1.8 m in 40 to 50 seconds. It is widely used in service stations, where they carry out repair and maintenance of SUVs, pickups, minivans and passenger cars. The device has a mechanical locking system that minimizes the possibility of an accidental fall of the machine. Equipped with a 2.2 kW motor, operates at a voltage of 380 V.

Price - 59,000 rubles.

• equipped with telescopic lifting arms;
• asymmetrical design makes it possible to easily get to the front doors;
• the presence of the "locking ruler-latch" system reliably fixes the machine;
• an automatic stop prevents the lifting arms from rotating;
• the device can be lowered without the help of hydraulics;
• no need for a high quality foundation;
• powder coating was used;
• can be additionally equipped with adapters for small trucks.

• absent.

Nordberg 4122A-4T

Mandatory equipment for both medium and large car services. Each column is equipped with automatic mechanical protection, and a lower cable synchronization is provided. The unit weighs 600 kg, raises the car to a height of 1.8 m in 55 seconds. The maximum carrying capacity is 4 tons. Operates from a 380 V network.

Price - 69,900 rubles.

• you can lower the machine during power outages;
• the car rises and falls smoothly thanks to two hydraulic cylinders;
• the unit is easy and simple to operate;
• complete with anchors for fastening to a horizontal surface and four adapters for frame machines.

• significant are missing.

Erco 3222 CEL

Mechanical device with a lifting capacity of 3.2 t, has two electronic synchronization motors. Smooth running helps to avoid falling cars. Stopping at the lowest and highest positions is automatic. There is a special motor overload protection. The machine rises to a maximum height of 1985 cm in 55 seconds. Unit weight is 600 kg. The package includes a built-in control panel, non-adjustable stops with rubber pads in the amount of 4 pieces, two protectors that protect the integrity of the car when installed on the device.

The product can be purchased for 344,167 rubles.

• asymmetrical telescopic lifting arms help the master to get to the driver's door;
• when the button is released, the engine is instantly turned off;
• 8 positions of lifting arms;
• pick-up height is insignificant;
• convenient to operate;
• reliable;
• long service life.

• significant are not established.

Power LIFT SP3000 3650 mm

The manufacturer has created an asymmetric unit for the maintenance and repair of various passenger cars. It has no basis, but there is a hydraulic device. Two independent traction cylinders are synchronized by two cables. Electromagnetic latches fix the stop at the required height. Lowering and lifting is carried out quickly, without the use of a hydraulic drive. There are no significant requirements for the base. In 30 seconds, the car rises to 1.82 m.

The cost is 485,550 rubles.

• there is no need to make a solid foundation;
• easy to use;
• reliable;
• convenient;
• goes down and up quickly enough;
• equipped with base amplifier and adjustable adapter.

• significant are missing.

Erco 4000 HNS

It is widely used in medium and small service stations, where there are small boxes and not a lot of free space, and there are plenty of people who want to fix their iron horse. Corghi has produced a unit weighing 770 kg, with a lifting capacity of 4 tons, operating from a 380 V network. The machine is lifted to a height of 1.9 m in 50 seconds. There are two independent hydraulic cylinders, asymmetric lifting arms, automatic clamps that prevent the arms from turning unauthorized.

Price - 427,000 rubles.

• the legs are equipped with protective bars so that the operator does not injure his legs;
• overload valves are present;
• the lifting arms can be locked mechanically;
• there is a sensor cable tension.

• not identified.

Four-column

Its main purpose is to carry out maintenance of a car or truck, its repair, anti-corrosion finish, painting, and so on. It is also used for wheel alignment control. It consists of two pairs of support legs, interconnected by longitudinal-type platforms, which function thanks to the presence of hydraulic hoses, electric cables, steel cables. The design is considered the safest for lifting and lowering a car. Manufacturers release the most up-to-date novelties every year.

AE&T F4.5D-4, capacity 4.5 t

The electro-hydraulic device is designed for quick and convenient lifting and lowering of the machine for maintenance and repair purposes. Can also repair small trucks. The most optimal option for the post "camber - convergence". Powerful and fast electrohydraulic drive reduces repair time. Control is carried out using the remote control. Equipped with specially designed access ramps. Raises the car by 1.7 m in 50 seconds. Powered by a 380 V power supply.

The average cost is 284,807 rubles.

• reliability thanks to a multilevel security system;
• durability;
• modern automation;
• complete with rear sliding plates;
• electro-hydraulic traverses are present;
• good price-quality ratio.

• significant were not identified.

PGA-6000/4 Civic, capacity 6 t

The Russian manufacturer produces a high-quality and reliable structure with a lifting capacity of 3 tons, equipped with sliding plates and double niches for turntables. Used to adjust the toe-in on the 3D stand. A pneumatic latch allows the carriage to be automatically locked. Auto in 60 sec. lifts to a height of 1.8 m.Dimensions: 7750 x 3617 x 2160 mm.

The average cost is 454,000 rubles.

• comfortable design;
• not difficult to operate;
• reliable, made of high quality materials;
• high security level;
• excellent value for money.

• not identified.

Trommelberg TST 470C

A feature of this model is smooth platforms and a pneumohydraulic axial jack, thanks to which the machine is suspended. Controlled by a push-button panel, lowered without the use of a hydraulic unit. The top quality metal is powder coated. Lifting capacity 7t, engine power 2.2 kW, powered by 380 V, lifting height (max.) 1.7 m.

Price - 518,077 rubles.

• high quality material is used in the manufacture;
• anti-corrosion coating;
• easy to operate;
• long service life;
• post-warranty service.

• absent.

Т4-34 Armada, capacity 4 t

The design with dimensions of 4360 x 3200 x 2000 mm is often found in small and medium-sized workshops. Designed for camber - convergence. There are movable plates and turntable space. Equipped with a two-ton driven traverse. Carrying capacity - 4 tons, weight - 945 kg, engine power - 2.2 kW, mains voltage should be 380 V.

Price - 225933 rubles.

• well maintained;
• has decent reliability and safety;
• Excellent value for money and quality;
• made of quality material.

• significant were not found.

Screw

Their main feature is the presence of a mandatory base and a nut - a screw, which is driven by an electric motor. The reciprocal structural element is rigidly coupled to the carriage and can only move up and down, raising and lowering the machine. Installed permanently, it can be produced with one or two motors, mechanical or electronic system. The lifting capacity is from 3.2 to 5 tons, the maximum lifting height is 1.9 m, the weight of the device ranges from 700 to 1040 kg.

DARZ P1-01MN "Antey", capacity 5 t

The electromechanical unit is produced for the repair and maintenance of machines, the weight of which does not exceed 5 tons. It is installed on one level with the base, which makes it possible to deal with various cars, ranging from Oka to prestigious foreign models, minibuses and SUVs. Frame cars require additional installation of screw supports.

Price - 181,840 rubles.

• high reliability;
• long service life;
• excellent anti-corrosion properties;
• resistant to organic solvents;
• good decorativeness;
• load screw and nut are durable;
• in the manufacture of the rack, a special high quality stamped profile was used;
• the position of the picks are locked automatically;
• good carriage synchronization.

• without fail, you need a high-quality and solid foundation.

P-97MK "Leader", l / c 3.2 t

Used to service cars of different classes. It features an extended coverage area and a small receiving height of carriages. The paint applied to structural elements is strong enough and is not afraid of mechanical stress, does not lend itself to corrosion, and is considered decorative. It is mounted independently, and no difficulties arise.

The average cost is 112,000 rubles.

• the presence of two electric drives;
• the cargo screw is equipped with a self-locking thread;
• long service life;
• excellent reliability and durability;
• pickups have different lengths;
• the cost of repair is sparing.

• significant are not established.

T4 (220 V)

The Chinese-made model is able to lift machines weighing up to 4 tons for the purpose of maintenance and troubleshooting. It has a reliable locking system, a small paw lift, independent safety locks, bottom synchronization, and an electro-hydraulic drive. Parameters: 3400 x 2820 mm, weight - 600 kg, two racks.

The average price is 112,585 rubles.

• affordable;
• good quality of the material used;
• reliability;
• long service life;
• no jerks when lifting;
• easy to operate and maintain.

• not installed.

Scissor

Such lifts are very popular in those garages where the owners are trying to expand the scope of services provided. They differ in their low height and make it possible to carry out tire work. They are often installed in rooms with low heights.

PGN-3000 / R-02, recessed

Consists of short platforms, two hydraulic cylinders. Installed flush with the floor. Retractable platforms allow servicing vehicles of various classes. Thanks to the stationary remote control, it is conveniently controlled. There is an opportunity to manually lower the machine in case of an emergency power outage. Can be equipped with adapters for frame cars.

The average price is 250,000 rubles.

• imported hydraulics;
• reliable;
• comfortable;
• functional.

• absent.

Astra Minilift AE100.1

A scissor, mobile, pneumatic device designed to lift the rear or front of a car to a height of 55 cm. It is widely used in small boxes. The time of descent and ascent is about 15 seconds, the weight of the structure is 115 kg, the parameters are 1200 x 550 x 32 mm, the maximum lifting capacity is 2.5 tons.

Price - 76,500 rubles.

• functional;
• comfortable;
• durable;
• affordable;
• high-speed;
• does not require an electrical connection;
• complete with a safety stand.

• not identified.

Werther Stratos SR / E (OMA 532LP 35), capacity 3.5 t

It is popular with the owners of car services where locksmith works are carried out on small trucks and cars. Electro-hydraulic floor unit with two double reliable hydraulic cylinders, hydraulic synchronization system, automatic lowering control, mechanic's feet protection.

The average price is 552,822 rubles.

• there is a possibility of manual descent in the event of a power outage;
• the control panel is quite compact;
• does not require constant maintenance;
• reliable and durable;
• functional.

• significant are not established.

Conclusion

A car lift is a type of garage equipment that allows the master to quickly and efficiently repair an iron horse.It allows the auto-locksmith to get any unit or unit, analyze its performance and repair it in case of malfunction. They come in different types, but all have such positive qualities as ease of installation and maintenance, ease of use, reliability, durability, functionality.