Road safety is every driver's top priority. Accidents are created not only by violations of the rules, but also by a technical malfunction of the car. If a broken timing belt or engine breakdown is not so critical, then a puncture of the wheel can have very fatal consequences. They carry most of the load while driving, so they are classified as consumables that need to be changed as needed. The wear is influenced by many factors, primarily the pressure in the chambers. Often, monitoring is carried out several times a year, only during seasonal replacement. However, this is wrong, since personal and passenger safety is at stake. An improperly inflated wheel is a serious hazard. To enable regular monitoring, a rating of tire pressure sensors for 2024 has been compiled. It will allow the reader to choose the best option for himself, corresponding to the car brand and owner's budget.
Content
The greatest peak in wheel loads occurs while driving. In addition to the friction force of rubber on the roadway, which leads to heating of the tires, the weight of the car itself acts on them. If the cameras are not sufficiently inflated, then this affects:
The wheels are deliberately lowered on sandy terrain, since with an increase in the contact area, the passability increases. However, too much pressure is also detrimental to driving. In such situations, drivers are faced with:
Experienced car enthusiasts know that improperly inflated wheels wear out faster. Therefore, you always need to monitor in order to protect yourself from accidents.
The answer to this question is provided by the car manufacturer itself. Manufacturers place the information on the nameplates located on the body struts on the driver's side, or on the gas tank flaps. But the numbers are relevant only for cold wheels. These are tires that have not been in motion for more than five hours. Therefore, it should be measured in this state.
But modern car tuning allows the use of different tire sizes. Accordingly, the pressure will necessarily differ. Also, it may not be the same for the front and rear wheels. It depends on the driver himself. Information about the norm is in the product passport. You need to take readings at least once a month, especially before a long journey.
There is another important point affecting the change in pressure in a confined space, this is the fluctuation in ambient temperatures. It changes by about 0.1 bar for every 10 degrees. The correct calculation allows you to drive longer on off-season tires, pumping up or lowering the tubes.
For the first time, monitoring technologies appeared on military vehicles to improve their cross-country ability. We all know that the ground is not uniform. If some tires on gravel perform well, then on sand or clay, the transport will get bogged down with them. Later, the devices were transferred to civilian vehicles. At first they were introduced as an additional option, then it became a mandatory safety standard for foreign cars.
In the instructions it is called TPMS, which translates as "Tire Pressure Monitoring System". But there are simpler ways to check - the calculation algorithm. This method does not require additional modules. All information comes from the ABS. The calculation scheme is not complicated: if the wheel is flat, then it rotates more often and travels a greater distance. This is monitored by a central computer.
External sensors are referred to as freelance tools. They are sold and installed separately. The technology of their execution depends on the price and manufacturer. The only and big disadvantage of such devices is the possibility of theft. No one is immune from theft, if the wheels are removed, then taking the caps off is even easier. However, this disadvantage does not override the other advantages of removable gadgets.
Control devices are distinguished according to the principle of operation and type of construction:
The first include removable pressure gauges and other devices that take readings before starting a trip or are permanently installed, but give only approximate information. The electronics are mounted on the rim and connected to the nipple. They send the measurement results to a monitor, smartphone via a radio channel or a Bluetooth frequency. They require a power source to operate. The battery is a button cell.
There are a huge number of models and manufacturers of control systems on the market. They are distinguished from each other by the availability of functionality, accuracy of readings, price and quality of performance. It is difficult for an ordinary consumer to understand the huge range of products. For this purpose, a rating has been compiled to help you find the best option for your car. It was based on customer reviews and recommendations.
product name | price, rub. | Voltage, V | Measurement limit, kPa | A type |
---|---|---|---|---|
Proline TPMS X5 INT | 8400 | 12 | 350 | electronic |
Parkmaster TPMS 8886 | 6982 | 12 | 350 | electronic |
Carax TPMS CRX-1002 | 12800 | 12 | 60 | electronic |
Huf Electronics for VW / Porsche | 2790 | not | 700 | auto |
CARCAM TPMS | 5990 | 12 | 300 | electronic |
The monitoring system is designed to diagnose tire pressure and transmit information in real time. The device will immediately report on the difference in readings, which allows the motorist to see the malfunction in time and eliminate it. A drop in pressure indicates a breakdown or leakage of the cameras, the gadget will definitely show this on the screen and the user will be able to change the wheel in time and avoid an accident. Excessive rise indicates overheating due to drive train malfunction. The tire may explode if left untreated. It is dangerous at high speed.
The package includes four devices. They are installed instead of nipples. An LCD display and current situation analysis tool is located in the passenger compartment. Usually it is placed on the dashboard, where the driver, while driving, has the ability to control the situation without being distracted from the road. The device is powered by a 12V cigarette lighter.
The monitoring and control system is devoid of wires. All data is transmitted via bluetooth connection. After starting the engine, the instrument starts self-diagnosis. After two seconds, it enters standby mode. The technology is fully automated and constantly updates the readings after the vehicle reaches a speed of 24 km / h.
A pressure sensor was needed for his wife's car. She does not understand technology, and it is not always possible to follow her technique constantly. We decided to purchase an automatic model that does not require additional settings and will simply show the status in the tires.
There are many options on the market. Eyes just understand, but none of them fit either in functionality, or in price and quality, or simply did not fit into the interior of the cabin (for women, this characteristic also matters). Here is the seller offered this option. I liked everyone at once. Inexpensive, stylish, compact and easy to handle. Installed and forgotten, it has been working properly for several months. We were very pleased with the purchase.
The device is a four-wheel control system. It transmits the necessary information to the display of a smartphone or tablet. Transducer and software included. If the versions do not match, the software is available on Google Play. It is enough to install it on your gadget, and the device is ready to use.
The receiver is powered by a cigarette lighter and is an intermediate link between the sensors and the phone. They themselves are powered by pill-type batteries. The broadcast takes place via a Bluetooth channel. Diagnostics and control is done through the app. It is activated immediately after starting the engine. The program checks the nominal values and, in case of deviations, issues sound and light warnings.
In addition to pressure, the device shows the temperature. This is a comprehensive monitoring, since in the process of friction of tires on the roadway, they will begin to heat up, which will certainly lead to an increase in the calculated indicators. Information on the screen is displayed in real time. The valves themselves are equipped with anti-vandal locks. Installation does not require a trip to a car service. The driver will be able to do all the work on his own in a few minutes. Calibration and adjustment is performed automatically.
Simple and inexpensive sensors were needed. The machine is not equipped with its own TPMS. But pressure control is very important. None of the proposed models matched the price or performance. This set of devices seemed to be the best option.
They are easy to install and work properly. No additional monitors. They only need a phone. Set it up, set it up and you can ride. There is functionality in the form of combination with other external devices. If there are problems, the gadget will report them. I am glad that I was able to fit into the budget and acquire a high-quality monitoring system.
Another convenient and interesting system for checking tire pressure. Designed exclusively for passenger cars, as well as crossovers and SUVs. The sensors are designed for a maximum pressure of 4.2 bar.
Drivers attribute the advantages of this device to the ability to use it on different wheels. Such ease of use will interest those motorists who, due to their profession, are forced to change vehicles.
The pride of the manufacturer is the installation of sensors of this brand on racing cars. The sensors measure every five seconds and send the readings to the head-end console. The system itself does not know the nominal values, so it monitors changes in pressure and temperature. Information is transmitted in one direction, that is, from the valves to the head unit.
The device is made in the form of a key fob with a black and white display. The sensors are in the form of capsules with a cap. Powered by a 3 Volt tablet battery. Gadgets work in conditions from -20 to +80 degrees with a relative humidity of 95%. They have a class of protection against moisture and dust in accordance with European standards.
An easy-to-use and affordable tire pressure gauge was needed. This brand immediately caught my eye. Very interesting design. Stylish, high quality. I bought it and put it on the wheels of my car and did not regret it at all. It signals all changes, which allows you to make an adequate decision on time. During the operation, I have never failed. Sensitive sensors show the slightest fluctuations in pressure and temperature.
Metal sensor for German cars Volkswagen, Porsche, Skoda and Audi. It is an additional equipment for vehicles. You must purchase it separately. The uniqueness of the system is its full integration with the on-board computer of the machines. It complements the standard TPMS system, and in its absence it works as an independent device.
However, self-assembly is not possible, since after installation it requires additional programming. This requires a special programmer. Binding type: automatic, stationary and ODBII. Without this, the sensor itself will not function. In any authorized car service, this procedure will be carried out in a few minutes at an affordable price.
After buying the car, he demanded to equip it with a system for monitoring tires and their temperature. The car service recommended this brand. I was especially pleased with the price for the device and its installation. The master did all the work quickly and conscientiously. He left the workshop in less than half an hour. The system does not fail, the German quality is immediately felt.
The brand is represented by wireless tire pressure monitoring sensors. It is an aggregate monitoring system operating over a radio channel. Has its own control unit. With its help, the driver will be able to set the nominal and limit values that the devices will track during the trip.
It shows both pressure and temperature. If they are rejected, the device will immediately notify the user. It does not require additional programming like previous sensors. You just need to install the sensors on the wheels and the system will detect them by itself. The car enthusiast only needs to set the indicators for which constant monitoring is necessary. Readings are taken every five seconds.
While traveling, you must constantly monitor many parameters of the car in order to protect yourself from accidents. Not all vehicles have enough resources to do this. Therefore, it was decided to buy an additional pressure control device. Immediately attracted by the price and the external performance really liked. I was also impressed by the ability to install it yourself in the garage. Without hesitation, I bought it, put it on, and now I can constantly monitor the pressure. Traffic safety has always come first, so I was very pleased with the purchase.
Road safety is the priority of every driver. In order to provide it, devices and devices are needed that will do all the work for a person. The driver needs to observe and make the right decisions.