Rating of the best dimmers for LED strips for 2024

People install various lighting devices in the premises, such as lamps, ribbons, which create comfort in the home and work environment. And modern technologies allow you to adjust the brightness of the lighting, and this is done using a special device, a dimmer. Similar devices apply to both lamps and light strips. Below in the article we will consider what dimmers for light dent (SDL) are and what they are.

What is a dimmer and why is it needed

A dimmer is a so-called dimmer that allows you to increase or decrease the luminous flux power. You should know that the regulators can be for an LED lamp and a strip, and differ from each other, therefore, using one device for two types of lighting devices will not work. Dimmers should be selected directly for the type of LED panel purchased, there is no one that would be suitable for everyone. If you use an inappropriate device, then the device itself will most likely quickly fail, this will be caused by the fact that the LED canvases operate in different modes and current values.

Dimmers for LED boards are used, as a rule, in cases where they are sources of main or additional lighting and most often when using several diode sheets. With the help of strip lighting and a dimmer, it is possible to:

• highlight certain elements of architecture;
• create a cozy, relaxing environment for rest, since bright light is often an irritant and is suitable for spending active time;
• can be used in children's rooms, especially useful if the child is afraid to fall asleep in the dark, creating a dim light with a dimmer, the child will feel comfortable and fall asleep without fear;
• stairs are also highlighted so that there are steps, a dimmer is also useful here to dim the backlight, so too bright light can blind the walker, and he, in turn, get injured.

In the same way, the floor lighting is adjusted, which is often installed in corridors and other rooms.

Dimmer classification

Manufacturers offer consumers a fairly large selection of devices for controlling the brightness of SDL and lamps. Dimmers for LED boards are different and are classified according to several criteria:

• if possible, convert the signal, there are analog ones, that is, those in which a thyristor or similar microcircuits are responsible for the output voltage, and digital ones operating on a microcontroller;
• according to the control option, they are divided into push-button ones, for such mechanical buttons or touch-sensitive ones, located on the dimmer itself, remote ones - they have a remote control and are combined, such allow you to work with the device in both ways;
• according to the form and type of connection, the devices are subdivided into modular, they are made in blocks with stamps to which the wiring is connected; overhead, built-in ones look like ordinary switches attached to the wall, they are also miniature - made in the form of a module with small wiring and having no more than three buttons;
• by purpose, they are divided into single-channel, intended for monochrome canvases, and multi-channel, suitable for tapes such as RGB and RGBW;
• by the presence of functions, not only a standard dimming can be built into the dimmer, but also turning on and off the additional blinking function, color music, the ability to manage several tapes placed in different places and many others.

The design classification allows the buyer to choose the model that best suits his requirements and wishes.

How to choose

If you are going to make lighting using SDL, you should immediately purchase a dimmer, thanks to which it will be possible to adjust the brightness of the light. But in order not to be mistaken in the choice, it is worth paying attention to several criteria:

• Power, it should be 15-20% more than that of the light board. But if in the future it is planned to increase its length, then it is necessary that the power reserve of the regulator be 30 percent higher than that of the light board, and at the same time do not forget that a margin is needed, which should be up to 50%, thus it is possible to avoid before temporary wear of devices ...
• Voltage, for both parts, it must be identical.
• The number of channels, which will depend on the type of SDL. For example, for monochrome, single-channel controls are used, for RGB or RGB + W, multi-channel controls are needed.
• Designs, it can be hidden or overhead, in this case it all depends on the wishes of the user.
• Control, in this case, everything also depends on the preferences of the person installing the lighting of this type. But it's worth knowing that devices with touch and remote control are more expensive.
• The presence of a function, but here you need to understand that the more the principle, the better will not work, since you will have to pay extra for additional features.

When choosing a regulator for LED strips, you need to take into account all the points in order to exclude quick damage to the structure and create convenient conditions of use.

Connection

When choosing a regulator for an LED strip, it should be remembered that one that works with the same voltage, that is, 12 or 24 V. stable and functional. The scheme is developed in accordance with the type of blade and its length. Connecting the device is a simple procedure and does not require any special devices for its implementation. Knowledge of the basics of electrical engineering will allow you to independently perform all actions, without the involvement of a specialist.

So, in order for the dimmer to work, it is enough to connect it between the power supply and the SDL itself. Of course, it should not be forgotten that the polarity of both inputs and outputs must be respected. The connection is absolutely the same for both single-channel and multichannel boards, only when connecting the second one, the owners will have the opportunity not only to control the overall brightness, but also directly each color separately.

Rating of the best dimmers for LED strips

There is a fairly large selection of dimmer models on the market, ranging from Russian manufacturers to Chinese ones. As for the price, its size is influenced by the package bundle and scope of use.Before buying a regulator, you should check the compatibility of it and the tape.

Often buyers prefer inexpensive models, but not all of them have a long lifespan.

Analog models

Analog devices provide a stable current for a working circuit. By using such devices it is possible to avoid a large loss of power while the lighting system is operating. Regulators of this type have one significant drawback, the LEDs get very hot during operation, which leads to their quick destruction.

Dimmer analog

It belongs to the most budgetary models of this type, it is perfect for LED lighting strips and lamps that support the dimming function. The switch operates on a voltage of 12 or 24 V, but the maximum current strength should not exceed 8A.

• affordable price;
• does not require any effort during installation;
• made of quality material.

• there are no on, off indicators;
• maximum current 8A;
• hard to adjust the exact brightness.

Arlight VT - S74 - 30 A (12-24 V)

This dimmer model fits perfectly with all monochrome LED strips. Ideal for controlling luminaires with 12 or 24 V supply. Easy to use, with smooth knob and simple graphic markings. With a convenient switch, users can easily adjust the required brightness of the diodes. It can withstand high current loads (30A), in addition, it is equipped with clamping contacts, and there are special light indicators on the case, allowing you to determine in what operating position it is.

• the product is of high quality;
• very easy to surface mount;
• withstands high current loads;
• additionally equipped with light indicators;
• has a compact size.

• the cost is high compared to switches of this type;
• suitable for only one area;
• mounting can only be overhead.

Controller - led dimmer - dm30-1212-24 V 30 A

High-quality design for manual control of lighting, operates on a voltage of 12, 24V, withstands a current load of 30A, and the maximum power is 360W. But it is only suitable for connecting to single color LED boards.

• affordable price;
• high-quality assembly;
• high power;
• withstands heavy load (30A);
• easy to manage.

• there are no indicator lights;
• suitable for LED strips.

Digital

Devices that regulate the brightness of LED strips, related to digital, are very comfortable when controlling the brightness of all LED strips. Digital regulators provide more stable current operation and reduce power loss to a minimum. Also, the use of such switches does not allow the LEDs to overheat, thus the period of their operation is significantly increased.

04-10 Mini - dimmer 12 V, 72 W, RF

A miniature radio-controlled device, which is in demand among consumers, thanks to it it is possible to transfer the SMD tape (monochrome) to several modes of operation, there can be up to 25 of them. The set includes a remote control that allows you to adjust the regulator from a distance. The device works at a distance of about 50 meters, which is very convenient; it also differs from the others in that it does not require direct aiming at the valve itself to control the functions. Allows the user to independently set the required brightness, turn on and off the power.

• belongs to the budget category;
• has a small size;
• a good complete set is included in the set;
• the remote control works without directing to the unit itself and at a great distance.

• signal failures occur when receiving from a remote control;
• maximum power 4/8 W / m.

ARLIGHT SR- 2839DIM WHITE

A single-zone device for adjusting the brightness of diode strips, to which a control panel with a sensor is attached, and a controller with a power of 1-10A is built into it.Dimming comes from a circuit, the voltage of which can be 12 or 24V.

• adjustment is carried out remotely;
• easy to install;
• a sensor is installed on the remote control;
• excellent equipment.

• high price;
• sizes.

Schneider Electric Blanca BLNSS040011

The dimmer of this model is manufactured by a French lighting company. The device has a hidden installation type and a mechanism equipped with a special plate. Equipped with a rotary and push button, has a glossy surface made of thermoplastic. The power can reach 400 V, and the voltage can be up to 220 W. Can be used in conjunction with motion sensors. Built-in memory function memorizes the last lighting level.

• functional;
• can be installed hidden;
• easy to install;
• high-quality material from which it is made;
• small size;
• due to its qualities, it has a reasonable price.

• quickly dirty surface;
• it is difficult to set the minimum brightness level, first you need to set the average level and slowly lower it.

Push-button

Constructions for dimming the light using buttons resemble ordinary switches in their appearance. To adjust the brightness with such a device, you just need to press a key, a quick press turns the device on and off, and a long press adjusts the brightness itself.

Panel SR-EN9001-RF-UP White

The panel is designed to control and monitor LED strips, all actions are performed thanks to the radio channel. Batteries in this device are batteries, installation is carried out in an overhead method, and the control itself is carried out using a special remote control.

• small size
• ease of installation and use.

• the price is quite high.

LN-MINI-DIM (12-24v, 1x6A)

A compact device equipped with buttons for control, which are located on the surface of the case. It belongs to the overhead type, the voltage can reach 12, 24 V. LED strips are connected, as well as PWM modules.

• the size of the device is small;
• easy to assemble;
• has a low cost;
• robust construction.

• the model is not suitable for complex lighting systems;
• control of the device is not very convenient.

Knob SR-2853K4-RF-UP White

According to customer reviews, this model is very high quality. The two-zone switch operates by radio waves, with a short press, the lighting turns on or off, with a long press, the dimming mode is activated. In order for the regulator to work, controllers from the SR-1009x series are used, which are able to simultaneously regulate the operation of several diode panels, and the battery (CR2430) acts as a power source. The model is suitable for controlling strips of the same color, as well as other luminaires powered by LEDs.

• works without connecting wires (autonomously);
• easy to install;
• has additional control from a remote control or using a phone if Wi-Fi is available;
• on, off mode is carried out smoothly;
• there is a command transmission indicator.

• the price is high;
• after the expiration of time, it is necessary to replace the batteries, or rather the batteries.

Remote models

Regulation and control when connecting this type of device is carried out using a special remote control, which is included in the kit with the switch itself. The control over the belt is carried out using a radio signal or infrared radiation. But those models that support radio signal control are much more expensive, the remote control allows you to adjust the lighting even when the user is outside the room.

Ecola 48W / 12V, 96W / 24V IR

The model of this regulator is infrared and allows owners to independently choose the degree of brightness and select the luminescence mode of monochrome boards; for ease of control, a remote control is attached.The signal comes from infrared rays, which come from the remote control to the receiver. The maximum load of this regulator model is 4F per channel, the LED strip is connected to the light regulator through a specially designed plug connector. The device is suitable for both monochrome and monochrome ribbons.

• remote control;
• functionality;
• the price is very low;
• easy to assemble.

• since the device is powered by an infrared remote control, the range is short.

APEYRON 300/600 W 12 / 24V IP20 with remote control

This model is suitable for single color boards, regulation is carried out using radio frequencies coming from the remote control. Among a number of functions, one can highlight such as on, off, brightness control, night mode and on-delay mode are supported.

• the presence of various functions;
• the quality of the design itself;
• light weight.

• suitable only for ribbons of one color;
• high price.

Arlight LN-RF6B-Sens Black (12-24V, 3x8A) 023375

An excellent model of the regulator with a radio remote control that has 6 buttons and a touch ring for control. The switch is perfect for multi-color RGB LED strips and allows you to create many different light shades. The dimmer has 10 different programs that can be set with successive color changes. One of the advantages of the device is that its body is made of metal that improves heat exchange and does not allow the mechanism to overheat, and also acts as a good protection of internal parts from damage. With the help of the remote control, it is possible to adjust the speed of changing shades.

• metal case
• all actions are carried out using a remote control with a touch ring
• functionality.

• price.

LN-RF8B (5-24V, 80-384W, 2.4G remote sensor)

One of the most popular dimmer models among consumers, has high power ratings (16A). Copes with all lighting systems, is equipped with additional reinforced brands, the set also includes a touch control panel. The structure is mounted overhead. It is possible to manage four zones at once.

• touch remote control;
• high power indicators;
• allows you to control four zones at once.

• the sizes are quite large;
• price.

Sensory

Devices of this kind have a special touch panel that allows you to adjust the brightness of the light by lightly touching it. Such models, as a rule, have a modern design, but in terms of functionality, they are no different from other types.

Switch - touch dimmer 12 / 24V 48W

A budget controller of small size, designed to control LED strips, easy to use, has a simple touch panel. It operates at a constant voltage of 12 or 24 V and belongs to one of the best budget representatives of this type of dimmer. Often used for decorative lighting in aluminum profiles. The maximum current during operation should not exceed 4A. the sensitive sensor allows you to easily set the required brightness. Suitable for LED downlights.

• the price is affordable for everyone;
• high-quality assembly.

• small maximum current, it is only 4A.

Uniel ULC-R22-DIM

Not a bad model of the touch controller, the remote control has a touch ring for carrying out all the necessary manipulations. The dimmer has a built-in memory function that saves all settings in case of a sudden shutdown of the device. To ensure that the device works without interruption, a special protection against radio frequency interference is built into its board. Quality parts extend the service life up to 50,000 hours. Uniel ULC-R22-DIM has a combined voltage supply, that is, it can be either 12 or 24 V.

• there is a memory function;
• quality details;
• long service life;
• affordable price.

• not detected.

Dimmer LN - 200 (12-24V, 72-144W, Touch)

A compact dimmer that allows you to control lighting with just one touch. A quick touch of the knob allows you to turn the light on or off, a long press turns on the dimming function. The highest voltage indicators during operation are 12-24 V, and the power reaches 77-144 W. A lightweight device that is placed on the wall will create comfort when controlling light in any home.

• compact size;
• touch control;
• has an overhead mount method.

• overpriced for such a simple device;
• limited number of functions.

Ecola LED Strip Dimmer Panel 12A 144W 12V (288W 24V)

The model is produced in the form of a touch panel that allows you to control the brightness of the light in the room. Suitable for adjusting multi-colored and one-color boards, the case is attached both externally (overhead) and by cutting into the wall. The kit includes an installation box that allows you to deepen the device into the wall when installing it. The user gets the opportunity to control the brightness of the light in ten modes.

• stylish look;
• mounting can be carried out in a cut-in or overhead way;
• staffing;
• affordable price;
• the regulator is equipped with 10 operating modes.

• with a heavy load and voltage surges, failure is possible;
• weak plastic case, does not withstand mechanical stress.

A dimmer for LED lenses, a device thanks to which people can control and adjust the brightness of lighting in the room. But before purchasing it, you should check the compatibility of the device and the light canvas and take into account all its functions. Installation, as a rule, does not cause any difficulties and does not require additional equipment.