Everyone knows that in order to restore performance and just have a good rest, you need to get a good night's sleep. To do this, you should choose the right mattress, since not only a good mood, but also general well-being will depend on a well-chosen mattress. But the main thing that a high-quality sleep device gives is taking care of the healthy condition of the spine.
Today's mattresses are completely different from those people have used more recently. They represent sophisticated devices developed by engineers in conjunction with doctors. Special laboratories are working on their creation and further improvement, in which specialists are working on the development of new models. Let's find out what, first of all, you should pay attention to when choosing and buying a mattress.
Content
These products, depending on the complexity of the design, can be divided into two different types: spring and springless. Each group has disadvantages and advantages. Knowing them, each buyer can choose the ideal option for himself.
There are no springs in the design of the mattress, which becomes immediately clear from the name. The filling of such products is not cotton wool, as it was before, but materials on a natural and artificial basis, created on modern technological equipment. They are completely harmless to human health. This group includes three types of mattresses:
Note! The high quality filler never squeaks, is perfectly transported, provides reliable and correct support for the spine.
Mattresses with spring structures installed inside are the most popular and in demand. In addition, they have a much longer service life.
Such models have large diameter springs in their device, which are intertwined with each other. This design creates a softer effect and provides better relaxation, as the contours of the human body are repeated.In addition, there is a large air gap in the middle part, which creates additional ventilation during sleep. The main advantage of the Bonnel system is its cost, which is available to the main customer group.
However, this model also has significant drawbacks. Sleeping on such a mattress is convenient for only one person. If two people of different weight categories sleep on the mattress, then the lighter one will roll down to the side of the heavier one. And with the movements of one, the other will involuntarily also move, since the entire spring system begins to move.
Another disadvantage is the short service life. The springs, which have continuous weaving, are damaged and torn quite quickly, the mattress begins to creak, "bumps" appear on it, which will certainly press on the body. And you will have to forget about good rest before replacing the mattress.
These models are very popular due to their high orthopedic qualities. A person sleeping on such a mattress gets excellent relaxation and rest.
This is explained by the well-thought-out structure of the spring block. A tight cover is put on each spring, which prevents metal from contacting other parts, which means there will be no squeak. The device of such models ideally repeats the shape of the human body, since the springs have a small diameter and their number per 1 square meter is enormous. This allows you to create anatomical. However, for people with problems in the spine, this model is not recommended, since the pain can only worsen.
The main disadvantage is the high price. In addition, jumping is not allowed on the products, which children love to do. In order not to deform the shape, periodically turn it over.
To buy a quality product, you need to consider the main selection criteria before buying.
A mattress with the right firmness will allow the spine to be in a natural position. Soft structures are suitable for people with low weight. For those weighing up to 90 kg, a medium hardness can be used, and the increased hardness of the mattresses is intended for people weighing over 90 kg.
The minimum mattress width can be considered 160 centimeters. The length is always standard and cannot be less than 200 cm.
For small spaces, the width of the mattress can be chosen smaller, but a 200 cm wide mattress is considered the most comfortable.
The outer covering gives the mattress an attractive look and the life of the product depends on it. It is better to choose a fabric that is dense and thick. Sheathing made of dense coarse calico and jacquard are most suitable for these purposes. The synthetic options are chosen for high quality.
People who are prone to allergies react to bed mites, the slightest accumulation of dust, certain types of fabrics that irritate the skin and do not allow air to pass through. They should pay attention to springless models with non-electrifying fillers. These can be coconut slabs, seaweed, latex, soy foam. They do not emit toxic substances and dust does not accumulate in them. Holofiber also belongs to safe fillers. It does not allow bed insects to breed and does not contain toxic substances.
To combat allergies, choose the appropriate mattress topper. The fabric for the cover should allow air to pass through well, retain moisture, not attract dust, and not electrify. These conditions will ensure comfortable rest and full, deep sleep. Such qualities are possessed by knitted fabrics, cotton jacquard.
When using covers made of mixed and synthetic fabrics, you should pay attention to tactile sensations, check the ability of the cover to create a microclimate that is comfortable for an allergic person, that is, to provide active air exchange and moisture permeability. To prevent the appearance of dust and bed mites, fabrics are additionally treated with special agents and antistatic fibers are allowed to be woven.
To increase ventilation, many mattresses have three-dimensional mesh inserts in the side.
To choose the right mattress, you should also study the rating, which was compiled from user reviews.
The first position is occupied by a double version with a patented spring system, which was developed by the famous Ascona company. The manufacturer made the springs in a special shape, they resemble an hourglass. There are 256 pieces in a square meter. Provided with a comfortable latex layer, coir and memory foam. Stiffeners are made of advanced polyurethane foam box material. It correctly locks the finishing fabric from the main unit with all the springs. The outer component is quilted jersey with a sintepon base, which makes the surface of the product the softest.
The second place can be given to a springless design. This model is presented by Italian developers of a wide industry. Every year the manufacturer only improves the model according to modern technologies. The interior consists of three parts. It is based on Eliocel 40, it is characterized by soft, elastic and resilient components. The outer surface is all-season (summer-winter). For the summer period, a cotton base, for the winter period - natural wool.
This springless double mattress consists of six layers: coconut coir is replaced by latex layers. All layers are 3 cm thick. Regarding rigidity, this model is average, so it is ideal for people with an unhealthy spine. The manufacturer has developed two options, that is, on the one hand, the average rigidity, on the other - higher. The cover is of a fairly high quality made of a quilted, compacted material on a cotton basis - jacquard.
The next in the ranking was a two-seat mattress made by Russian manufacturers. There is a variety of stiffness on the sides. One side is made of polyurethane foam (rather soft), on the other side the base is coconut coir (as hard as possible). The basis includes an independent spring block. 500 springs are built into 1 square meter, thus, it is possible to increase the load to the maximum. The surface of the cover is made of embossed jersey.
It occupies the highest position as it has an independent spring block. The springs separate the individual fabric covers. Thus, the functionality of the model has been increased several times. 512 springs are built into each square meter. Felt material wraps around all sides, it visually levels the surface and prevents the springs from protruding. One side is soft enough from a material capable of taking the shape of a human body memorix, the hard part is made of coconut coir, which is pressed with a special latex solution.
The next in the ranking is a double mattress with an independent spring block. Screening of blocks occurs due to layers of dense spunbond material. There are layers of natural latex on all sides, due to which the product is not only soft, but also has good ventilation. This option is not relevant for people with problematic spine. The model is good for everyone who likes soft mattresses. The knitted cover is pleasant not only in the moments of touch, but also convenient in the process of use, since the sheet does not slip on the surface.
This model will support the problematic spine in a maximum of seven parts. The manufacturer made the springs according to the hourglass principle, therefore the most practical, and will be able to withstand the heaviest loads. The faux-surface upper is impregnated with green tea oils for antibacterial properties. This model is ideal for all people with sensitive and delicate skin, as well as allergy sufferers.
The rating is completed by a unique model without springs. The double product was created by the Russian company Ormatek. Such an acquisition will satisfy people not only with a sore back, but also with joint pain. The main part of the product consists of a monolithic slab of special foam. Also, this model is relevant for asthmatics, as air is circulated, preventing dust accumulation. The cover is sewn of natural jersey. Quilted surface adds softness.
The first in the ranking is an orthopedic mattress with two berths and an independent spring block (512 pcs per 1 sq. M.). The separate elastic element has a special case made of spunbond nonwoven fabric. The sides of the springy parts are covered with a latex frame with a convex surface. The fabric is an excellent air conductor, does not absorb unnecessary aromas due to the existing breathable pores. The strength of the product is given by an interlayer of modern coconut fiber with the ability to quickly restore its original shape.
On the second step in the ranking is a sleeping mattress with sidewalls with increased stability. The frame of the device consists of a unique design that excludes contact of metal springs S 1000 (1020 pcs per 1 sq. M.). The top of the product has a layer of coconut coir combined with natural latex. The outer shell consists of a jacquard fabric with a 3D stitching. The dirt-resistant coating is very pleasant to the touch and does not accumulate dust, perfect for people with allergies.
The impressive size of a double square mattress 200 × 200 cm is complemented by an artificial latex filling. The material is notable for its low cost, zero allergenicity and increased elasticity. There are some caveats - insufficient air permeability and early wear. The monolithic base without springs will appeal to those who prefer an average stiffness of the berth, coolness and point elasticity. There is a load limit of up to 80 kg.
Reviews have been reported by users to improve the quality and duration of sleep. The duration of operation depends on the body weight of the buyer. The greater the weight of the owner, the faster the deformation of the filler will occur. Separately, the excellent quality of the cover with a double strong seam was noted, which speaks of the great efforts of the manufacturer.
On the fourth line there is a double mattress with separate wire spirals of different hardness. One of them is endowed with a medium grade, made with coconut coir and natural latex. The other has a high degree and is made using coconut fiber 2 cm thick. Both halves are divided into seasonal periods, allowing you to drown in the mild warmth in winter and enjoy inviting coolness and comfort in summer.
The fifth position, by right, belongs to the sleeping mattress, designed for two people with a universal medium firmness. It is based on non-contact iron spirals, made in an unusual hourglass shape. This construction supports the spine in 5 important positions. The model stays smooth, flat and durable thanks to the coconut coir. The protective cover is made of jersey with an antibacterial composition of silver ions.
A block of independent springs forms the basis of the invention. The first side is made with coconut coir, giving decent strength and pleasant elasticity, and the second, medium hard, consists of eco-foam (artificial latex). The jersey cover is quilted with a gentle insulation.
Choosing a new mattress for yourself in online stores should not be tempted by colorful pictures from the catalogs provided. It is better to pay attention to the available passport, which tells the exact information about the properties of the proposed product. It is worth giving preference to well-known manufacturers who supply certified products directly from the manufacturer's plant with a complete set and accompanying documents.
You need to listen to your spine and not be lazy with going to a store or warehouse, going with a consultant to test the selected model. Do not hesitate to try the mattress, lying on the surface, listen to the sensations and listen to outside opinions. If the seller is confident of the high quality of the product, there will be no objection.
Do not rush to choose, carefully study the parameters, the composition of the filling of the mattress topper. Clarifying questions will not hurt to be sure of the final choice of this product.