Rating of the best filters for pressure washers for 2024

High pressure washers, like any complex technical equipment, have unique functionality and specificity of use. The most important role is played by inconspicuous elements and accessories - water purification filters. It is thanks to such small devices that long-term and efficient operation of the entire unit is ensured.

The main criterion for choosing a product is the characteristics of the purchased product. However, this raises many questions, the answers to which can only be given by users of such devices - maintainability, reliability, parameters corresponding to the declared ones. This review has been compiled on the basis of the popularity of models, according to buyers, as well as their characteristics. He will help you how to choose quality accessories for your washing equipment.

What is it - purpose and device

High pressure washer filter - a device for purifying the water entering the unit from foreign substances - dirt, sand, hard salts and chemical elements.

The main purpose is to prevent the penetration and settling of harmful substances on the surfaces inside the product to prevent breakdowns and increase the service life.

They can have different design features, but the principle of operation is practically the same. Inside there is a removable element in the form of a disc, cartridge or metal mesh for cleaning. There is also an outlet for collecting the collected dirt. For pressure reduction it can be produced together with a reducer.

The filter must be cleaned after each use of the washing equipment!

Kinds

1. Preliminary (rough) cleaning.

They are installed to trap particles that cannot be dissolved - corrosion, loam with sand, etc. Given that water is taken from tanks or highways that do not contain large contaminants, such devices are not used very often.

2. Deep (fine) cleaning.

They are placed in high-pressure devices for the retention of suspended solids with sizes from five micrometers (non-soluble or soluble) - the smallest organisms, chemical compounds or metal particles with a large atomic mass.

Criterias of choice

Models differ in the following parameters:

1. Outlet / inlet thread - the value must correspond to the thread on the branch pipe, otherwise it will not work to put on the unit. Standard value is ¾ inch.
2. Maximum pressure - measured in bar, the value should not be less than the pressure of the sink, otherwise the device will fail. Typically in the range of six to 20 bar.
3. Maximum temperature - indicated in degrees and demonstrates the permissible temperature for using a particular product. Models are available only for cold water or for hot water at a specific temperature. Usually it is no more than 40-60 degrees.
4. Filtration capacity - determines the ability to retain dirt and measured in micrometers (old - microns). The lower the minimum value, the better the quality of water purification. For the first stage, at least 50 micrometers is enough.
5. Productivity - determines the throughput of the device in liters per minute.
6. Material - usually produced in a plastic case, sometimes with metal inserts.

What to look for in order to avoid mistakes when choosing:

• the device should be collapsible so that it can be easily removed and washed;
• there is a possibility of repeated use for operation for a long time;
• versatility for use on units of different manufacturers in case of replacement of washing equipment.

Operating rules

1. Before cleaning the cartridge from contamination, the device must be dried, then the dirt must be removed.
2. A hard metal sponge or brush will damage the mesh structure of the mesh and reduce the filtration capacity. In addition, the foam quality will deteriorate if the foam lance is used.
3. When taking water from a natural reservoir, a coarse (preliminary) filter must be installed at the end of the inlet hose.
4. If the metal mesh is damaged, the cartridge must be completely replaced.

Where can I buy

High-quality popular models and new items can be bought in sales offices of manufacturers of pressure washers, or in specialized stores selling accessories, components and consumables, as well as garden equipment. There you can see, touch and test the best products. At the same time, managers will give valuable advice and recommendations - what products are there, which company is better to buy, how much a particular product costs.

In addition, the necessary parts can be freely ordered online in the online store or on the pages of the Yandex.Market aggregator, where the best manufacturers and samples are presented, as well as specifications, equipment, descriptions and photos with a direct link to the seller's website, as well as reviews buyers.

The best filters for pressure washers

The rating of high-quality devices is based on popularity in the opinion of users of the Yandex.Market aggregator. The review includes inexpensive models costing up to one thousand rubles, budget devices of the middle price segment at a price of up to two thousand rubles and premium-class devices at a price of more than two thousand rubles.

TOP 5 best inexpensive filters

BISON 70402

Brand - "Zubr" (Russia).
Country of origin - China.

Fine cleaning product to protect the high-pressure washer from foreign matter in the water. Mounts with the supplied connector on the ¾ ”inlet. A hose with a maximum diameter of ½ ”can be connected. The collapsible design allows for easy cleaning. The filter element does not require replacement. Suitable for all models of Zubr brand sinks.

• complete with quick-release connector;
• great quality;
• convenient use;
• collapsible design;
• good tightening with a nut
• low price.

• small mesh area.

KARCHER 2.642-794.0

Brand - KARCHER (Germany).
Country of origin - China.

A Chinese-made cleaning device to prevent foreign particles from entering the washing unit from water from tanks, barrels or natural reservoirs. Significantly extends equipment life due to contamination protection. The robust, thick-walled casing has good wear resistance and a long service life. The condition is visually monitored through a transparent flask without the need to disassemble the branch pipe. Easy to clean with detergents and warm water.Compatible with all brands of Karcher K2 - K7 sinks.

• small dimensions;
• small section of the mesh;
• easy connection;
• convenient packaging;
• versatility;
• collapsible design;
• visual control of the degree of pollution;
• plastic case;
• good wear resistance;
• tight connection

• overpriced.

Video review:

CHAMPION C8115

Brand - CHAMPION (Russia).
Country of origin - China.

Fine cleaning device made in China for water entering the pressure washer. Prevents foreign particles and suspended solids from entering the unit. Placed on the inlet pipe. Rubber gaskets seal all interfaces. It is connected to the hose with a standard garden “quick-release”. The collapsible design makes it easy to clean the cartridge under running water. Allows to significantly increase the working resource of the pump of the device The popularity of the models is due to the versatility for the entire CHAMPION range.

• well cleans water from impurities;
• simple construction;
• collapsible;
• easy cleaning;
• long service life;
• suitable price.

• not detected.

BOSCH F016800284

Brand - BOSCH (Germany).
Country of origin - Italy.

Replaceable Italian-made device for all BOSCH Aquatak sink models. Performs good filtration of incoming water during operation. The application provides a long service life of washing units. The absence of the device may void the warranty for the washing equipment.

• simple connection;
• excellent filtration;
• collapsible design;
• easy cleaning;
• good wear resistance;
• high-quality manufacturing;
• versatility for brand sinks.

• not detected.

PATRIOT GTR 100

Brand - PATRIOT (USA).
Country of origin - China.

A product of rough water purification of the Chinese production under the American trademark for household and professional high pressure washers. Placed in front of a sink with a 1-inch connector. It can be easily removed and disassembled for cleaning. The robust housing ensures a long service life.

• good water filtration;
• universal use for various brands of sinks;
• collapsible design;
• transparent flask;
• easy cleaning;
• durable plastic case;
• long service life;
• high-quality performance.

• not identified.

comparison table

	Bison 70402	KARCHER 2.642-794.0	CHAMPION C8115	BOSCH F016800284	PATRIOT GTR 100
Thread, inch	3/4	3/4	3/4	3/4	1
Temperature max, deg.	60	60	60	60	60
Max pressure, bar	12	12	12	12	12
Dimensions (LxWxH), mm	140x90x50	119x50x50	120x50x50	130x50x50	199x97x48
Weight, g	80	73	84	100	80
Warranty, month	6	12	12	12	12
price, rub.	168-310	579-888	145-190	539-1016	267-513

TOP 4 best filters in the middle price segment

COMET FR10034

Brand - COMET (Italy).
Country of origin - Italy.

Water supply filter for use in professional pressure washers. Good cleaning ability of 100 microns with a capacity of 55 liters per minute. Robust housing with transparent bulb for visual inspection of the degree of contamination. Detachable design provides easy flushing from dirt.

• versatility;
• reliability;
• good bandwidth;
• wear resistance;
• easy cleaning;
• long service life;
• excellent value for money.

• not detected.

BOSCH Professional F016800334

Brand - BOSCH (Germany).
Country of origin - Italy.

Italian product for installation on professional high pressure washing equipment. Installed from the outside. Designed to prevent the ingress of foreign particles into the unit and prevent its failure. The robust plastic housing ensures long-term operation of the device. In stores it is offered at an average price of 1600 rubles.

• good water purification;
• reliability;
• high-quality manufacturing;
• long service life;
• durable plastic case;
• collapsible design;
• easy cleaning.

• overpriced.

Makita HW41161

Brand - Makita (Japan).
Country of origin - Japan.

Universal accessory for use in professional Makita high pressure units.Durable material ensures a long service life. The collapsible design provides easy and quick cleaning from dirt. A wide range of prices allows you to find a device on sale at the lowest price.

• durable body;
• long service life;
• high degree of water purification;
• collapsible design;
• versatility;
• easy to clean;
• excellent value for money;
• small size.

• not detected.

BOSCH F016800440

Brand - BOSCH (Germany).
Country of origin - China.

Large capacity device to minimize the ingress of dust, sand and other foreign particles in the water into the washing equipment. Installed on the inlet pipe. Prevents clogging of the pump and prevents damage to the unit. The tightness and protection of the hose from leaks is ensured by a sealed O-ring. The collapsible design allows you to quickly rinse the device in running water and clean it from dirt. Chinese counterparts are much cheaper than original products.

• simple use;
• durable transparent body;
• long service life;
• large volume;
• good tightness.

• not detected.

comparison table

	COMET FR10034	Bosch Professional F016800334	Makita HW41161	BOSCH F016800440
Thread, inch	3/4	3/4	3/4	3/4
Temperature max, deg.	40	60	60	60
Max pressure, bar	10	12	12	12
Dimensions (LxWxH), mm	105x75x115	140x80x70	90x60x60	160x70x70
Weight, g	164	150	200	180
Warranty period, months	12	12	12	12
price, rub.	1220	1500-1600	1290-1860	958-1070

TOP 3 best premium filters

KARCHER Perfect Connect 2.997-211.0

Brand - KARCHER (Germany).
Country of origin - China.

Coarse water purifier for placement at the inlet of washing equipment without an integrated filter. Prevents contamination of the pump by sand and foreign dirt particles up to 250 microns, increasing the life of the unit. The capacity is about 4000 liters per hour. The cartridge can be easily removed to clean the dirt. Durable plastic housing ensures a long service life.

• removable cartridge, easily cleaned under running water;
• small size;
• collapsible design;
• transparent flask;
• simple connection;
• long service life;
• quality workmanship.

• high price.

Kranzle 13.300 3

Brand - Kranzle (Germany).
Country of origin - Germany.

A universal device for fine water purification for use in Kranzle units. Preventing the ingress of foreign small particles up to 60 microns in size and contaminated suspensions increases the service life and prevents the failure of the washing equipment. Installed on the inlet with a threaded connection. The outlet and inlet are made of brass and the replaceable cartridge is made of steel.

• high-quality performance;
• durable body;
• high filtration capacity;
• collapsible design;
• easy cleaning under running water;
• the possibility of a separate purchase of a replacement cartridge.

• not detected.

KARCHER 4.730-102.0

Brand - KARCHER (Germany).
Country of origin - China.

A type of fine water purifier used in pressure washers. Installed on the inlet pipe with the function of protecting the unit from particles up to 125 microns in size with a capacity of up to 1200 l / h. It can double the service life of the washing equipment. The collapsible design allows easy and quick cleaning of the device from dirt. Suitable for all KARCHER models.

• good water purification;
• collapsible design;
• easy to clean under running water;
• additional adapter 1 inch;
• long service life.

• not detected.

comparison table

	Karcher Perfect Connect 2.997-211.0	Kranzle 13.300 3	KARCHER 4.730-102.0
Thread, inch	G1	3/4	3/4; 1
Temperature max, deg.	60	60	50
Max pressure, bar	12	12	12
Dimensions (LxWxH), mm	120x220x200	100x50x50	200x180x75
Weight, g	815	300	302
Warranty period, months	12	12	12
price, rub.	3910	2340	2000-2533

Self-production

If it is impossible or unwilling to buy branded filter elements, you can make a homemade device yourself at home with your own hands, for which you need a set of accessories:

• plastic bottle;
• trimmed top cover;
• hose;
• hose connector;
• female nylon stocking.

Step-by-step instructions on how to make a filtering device include the following steps:

1. Cut off the plastic bottle and insert the hose through the hole in the cap.
2. Put on the hose connector.
3. Pull a stocking over the cut bottle.
4. Screw the cap onto the neck, securing the structure.

The hose does not enter the bottle hermetically so that when lowering into the barrel the filter does not float, and the remaining air comes out of the neck.

After immersing such a homemade device in a container with water and taking it for the washing equipment, a rough cleaning will be performed.

Enjoy the shopping! Take care of yourself and your loved ones!