Rating of the best manufacturers of silent blocks in 2024

The silentblock plays an important role in the car's suspension. Firstly, the rubber part allows you to reduce shaking, motion sickness. Also, the bad road feel is less pronounced with the silent block. The world market has a huge number of parts from different manufacturers: Russian, European and even Asian. The expert rating helped determine the leading leaders in 2024 for the production of silent blocks.

What to consider when choosing a silent block for a car?

First, it is worth talking about the composition of the silent block. Basically, two designs are distinguished among the hinges, namely collapsible and non-collapsible. Silent blocks are classified as non-collapsible. They are a combination of metal clips and an elastic sleeve. The connection is carried out in one of two ways: vulcanization or compression. This design showed that the parts move smoothly, but, unfortunately, the required rigidity was not achieved. Therefore, the most advantageous option is considered to be a design where the fixing of parts is carried out using interference and vulcanization. What aspects to pay attention to so that the design does not let the consumer down?

1. Materials used. In the production of a silent block, materials with rubber properties are needed. Rubber in this production is losing its position. It was replaced by polyurethane. It significantly increases the durability of the silentblock, as it is very elastic, but also slightly stiffer than rubber. Consumers note that when driving off-road, they do not experience discomfort.
2. Dimensions. It is an important step when choosing a silent block. Most often, the selection is made through Internet services, where you enter the data of your car and you are shown the required size of the part. Otherwise, you need to make measurements with a caliper of the outer, inner diameter and the length of the hinge.
3. Durability. Good quality parts can stand without replacement with a run of 100 thousand kilometers or more. But it is obvious that you will have to pay a rather large amount of money. There is an option - to find an alternative. Conventional silent blocks of CIS manufacturers usually serve for 50 - 70 thousand km, overcoming the distance of domestic roads.
4. Features of installation. Many car enthusiasts have quite serious problems associated with replacing this very part. Do not rush to install the part. First, it is necessary to clean the nest of various defects, that is, to create the necessary conditions for operation. Then, apply a layer of grease. Soap can be used as an alternative to oil.Apply marks, and place the part evenly on them. Only after these procedures have been completed, you can start pressing. Finally, check the tightness of the bolts and nuts.

Below is an overview of the firm with their advantages and disadvantages, as well as customer reviews. The list below will show you the best option to look out for. Russian and foreign manufacturers will be represented.

Rating of silent block manufacturers

Only the best rubber-metal hinges take part in the presented list, which were selected for many parameters. In addition to the price / quality ratio, reviews of motorists and the characteristics of the part were taken into account:

• composition - type of construction: collapsible and non-collapsible, as well as the type of interface;
• the materials used are old rubber or new polyurethane;
• dimensions - diameters and length of the hinge;
• service life - the benchmark is a mileage of 100 thousand km;
• installation nuances - replacement problems.

The quality of rubber-metal hinges, reviews of the company, compliance with the price and requests of modern motorists - these aspects were taken into account when compiling the rating, in which domestic and foreign companies participated.

Best Imported Rubber Metal Hinges

It is believed that manufacturers from Europe and America make the most durable hinges. German factories demonstrate a high degree of reliability and quality of this product. Currently, Asian firms have moved here, which are not inferior to their European competitors. Having put a part of these brands on the car, it will not be necessary to change it soon.

Hyundai

This logo has proven itself from the best side. The hinges of this brand are made using modern technologies. Innovative methods allow parts to extend their maximum service life. This rubber-metal product can withstand heavy loads and is resistant to deformation. The node requires a detailed check only after 50,000 km of run.

There are 2 types of rubber-metal hinges produced. In some, the inserts are made of polyurethane, in others - of vulcanized rubber. In the first version, the products have blue and yellow shades, in the second they are dark. The Korean automotive giant produces 2 types of hinges. Hyundai Mobis and Car-Dex have proven themselves excellently. If other names are sold in stores, then there is no doubt that this is a fake.

• great quality;
• high reliability;
• long service life;
• the product is suitable for different brands of cars;
• the parts are made using modern technologies.

• high price;
• there are many fakes of this product on the market.

Despite the high cost, the purchase justifies itself with a long service life. Also, users note that the product is compatible with most brands of Asian cars. However, many fakes are sold in stores, which makes it difficult for inexperienced car owners to make a choice.

Formpart

This manufacturer has all the necessary products for repairing the steering and chassis of commercial and passenger vehicles. The product is of excellent quality. The prices for spare parts from this manufacturer will be much lower. All parts are certified according to European and international standards. The plant produces more than 1000 categories of goods (1600 items and accessories).

• the price corresponds to the quality;
• a large selection of spare parts;
• products are manufactured in Europe;
• international quality certificate;
• there are branches in different countries.

• average quality indicators;
• not very long service life.

Spare parts from Formpart are suitable for motorists who do not seek to buy products from expensive brands. These clients are usually of average income. They are completely satisfied with the price, although the service life of the parts is slightly less than that of famous manufacturers.However, polyurethane and rubber products do their job perfectly.

RTS

The production facilities of this plant are located in Spain, although the brand is very popular throughout Europe. The company manufactures parts for the suspension, chassis and steering structure. About 16 million products are manufactured in 12 months. This fact speaks about the popularity of the brand. For undercarriage only, the full range of seals and spare parts for mid-range machines is available. This brand produces silent blocks for budget vehicle repairs. The branded products are of good quality and are delivered in special packages.

• big choice;
• great quality;
• can be purchased in different countries;
• affordable price;
• are certified according to ISO9000 standard.

• Parts manufactured by RTS do not have a specific Authentication ID. When buying, be sure to look at the packaging. It should have branded printing marks.
• The number of fakes on the market increases every year. It is becoming more and more difficult for the buyer to distinguish branded goods from homemade spare parts.

Febi

The products of this company are in great demand among buyers. The plant produces a wide range of components for cars. The merger of the two giants Ferdinand and Bilstein turned out to be a successful deal. Currently, the delivery of goods is carried out in 130 countries on different continents.

Many branch plants were built in different states. This is done to meet the needs of consumers. After the introduction of the latest technologies, the assortment expanded to 9000 items. There are several dozen types of hinges.

• large shipments for automotive giants;
• a wide range of;
• product quality at the highest level;
• long wear life;
• branches are located in different states.

• the presence of fakes;
• high price.

In our country, it is difficult to purchase a quality item due to the large number of fakes. This fact is due to the huge demand for spare parts from this manufacturer. For high durability, you will have to pay more money than other manufacturers ask for. The company has become popular because the global automotive giants trust Febi.

Febest

This brand from Germany also got into the ranking of the best manufacturers. He makes excellent quality products for Japanese and Korean cars. Part of the production is located in the PRC. This is necessary to reduce the number of counterfeits on the market. In the production of rubber-metal hinges, natural rubber is used here. And in order for the part to be operated for a long time in a low-temperature climate, highly efficient additive components are added to it. Great importance is attached to a guarantee that allows you to withstand a mileage of more than 50,000 km.

• reasonable price;
• high German quality;
• long service life of one part;
• natural materials are used in production;
• durability when used in regions with low temperatures.

• after the opening of factories in the PRC, the quality of parts where rubber is present deteriorated;
• specialization is narrow.

Manufacturers have relied on the availability of their products to a wide range of buyers. To reduce the number of counterfeit parts, production facilities were moved to China. As a result, users notice a deterioration in the quality of the manufactured products. The giant produces goods exclusively for Asian cars. There were no more negative points in the reviews.

Lemforder

This brand from Germany is the undisputed leader. The company produces spare parts for the chassis of cars. Narrow specialization allows introducing the latest developments and technologies in the process of activity.

The starting material for production is carefully controlled. In the domestic market, it is the Lemforder hinges that are popular. A large number of positive reviews are proof of this fact. The plant produces over 13,000 items. Spare parts are used for Mercedes-Benz, Volkswagen, Ford cars.

• long-term operation;
• high reliability;
• wear resistance;
• proven quality;
• big choice.

• high price.

Trust in this brand is time-tested. He is trusted by both ordinary motorists and huge manufacturing giants. Domestic consumers highly appreciated the wear resistance of the products in harsh winter conditions. As a disadvantage, only high prices and a high probability of buying a fake are noted.

Swag

The brand is in second place in terms of demand and range of products offered. The company produces not only mechanical rubber parts, but also provides packaging services for various European manufacturers.

Long-term work was not in vain, the latest technologies for the manufacture of parts for steering mechanisms were developed. Therefore, Swag is trusted by such major automotive giants as Mercedes Benz, Porsche, BMW. The products sold in the domestic market have a medium price segment. The presented product thoroughly undergoes international standardization and certification.

• a wide range of;
• reasonable price;
• high reliability;
• long service life;
• the products shown are suitable for different car brands.

• the rubber component may come off;
• problems with brand designation.

How to choose Russian-made silent blocks?

All parts for cars that are produced in our country are suitable for a particular car brand. They are produced and produced by certain manufacturing firms. This does not mean that foreign manufacturers are somehow worse. The difference is different. Domestic manufacturers are the best at making spare parts for our cars, adapting them to the Russian climate and local roads. In addition, the price for spare parts will also be much more attractive.

Polyurethane

This is a fairly well-known manufacturer of spare parts in our market. Parts produced by this manufacturer are suitable for both domestic and imported cars. Based on the name of the company, it can be understood that polyurethane is the main material for the production of parts. The material used is from the best suppliers and is of excellent quality. The equipment used in the car plant is new and allows for the production of world-class products.

The main advantages of the spare parts of this company are reliability, high durability, compatibility with cars of different makes and excellent moisture resistance.

Of course, there are also some downsides. The silent blocks of this manufacturer behave quite tough on the road. In addition, there are very high risks of purchasing a fake product. Although, if we compare the products of this company with spare parts of leading world brands, then the chance of running into a counterfeit product will still be lower. Drivers who use the products of this manufacturer, on the one hand, highly praise the product for its reliability and durability, and on the other hand, they talk about the complexity of installation and increased noise when driving.

• a wide range of;
• renowned manufacturer of spare parts;
• high reliability of manufactured parts;
• high strength;
• compatibility with cars of different production;
• excellent moisture resistance.

• the complexity of the installation;
• increased noise when driving.

Fulcrum

This company began its work as a regular car service, but over time it was able to develop into one of the largest manufacturers of spare parts on the Russian market. Silent blocks of this brand are best suited for VAZ cars.Driving a car equipped with products from this company will become more sensitive and comfortable. At the same time, additional rigidity appears in the rear suspension. The main thing is not to buy counterfeit goods. If everything went well, then the spare parts of this brand will serve for a very long time, which will delight the owner of the car.

The disadvantages include only some stiffness of the rear suspension and a large amount of counterfeit goods. It is because of counterfeiting that many drivers respond negatively to the products of this company. In fact, if you purchase a product of a subject quality, the silent blocks will last a long time and will delight the motorist in all forms.

• reliability on the road;
• increased wear resistance;
• relatively low price;
• increased stability on the road, which allows you to drive the car with maximum comfort.

• rear suspension stiffness;
• a large amount of counterfeit goods.

BelMag

Silent blocks of this company have conquered the markets of our country for a long time. A large plant with the latest equipment, qualified specialists, vast experience in the production of spare parts - all these are the absolute advantages of BelMag products. The company has won numerous competitions held in our country and even abroad.

The advantages of the company include an adequate price and a strong distribution of products.
The disadvantages, again, include numerous product counterfeits. Previously, the silent blocks of this company were forged much less, but recently, the number of low-quality and defective products has increased significantly. Therefore, the goods of this brand must be purchased only from trusted suppliers and sellers.

• qualified specialists;
• adequate price.

• a large amount of counterfeit goods.

Priory

Despite the fact that this company has recently entered the wide market, it has already managed to recommend itself excellently among consumers of the product. Usually products of this brand are installed on domestic cars, although, in general, they are also suitable for imported vehicles. The strictest control is carried out over the quality of products, which makes it possible to produce products that are in no way inferior in quality to imported manufacturers. The only thing that distinguishes the products of this company from foreign manufacturers is a more favorable price. In addition, it is possible to make a custom-made silent block, which will be suitable for a specific vehicle. The products of this company can be easily purchased in all regions of Russia, which is also a significant plus in the work of this company.

The disadvantages include a longer production time of the order than was originally announced. There are fewer counterfeits of this company than other domestic manufacturers. This is due to the fact that very often the products of this company are purchased directly from the factory, to order. The discrepancy between the terms of manufacturing the order also depends on the individual approach to production. After all, raw materials for the manufacture of products are very often purchased in Europe. Thus, production depends on the delivery time of raw materials.

• long lead time;
• suitable for imported vehicles;
• production of spare parts.

• inconsistency in the terms of the order.

Which manufacturer of silent blocks is better to choose?

This is a rather individual question, the answer to which can only be found by analysis and by product comparisons. In addition, it is necessary to understand what quality of silent blocks is the main and most important for the buyer. After the analysis, you can come to the choice of the products of the company that will suit a particular customer. If you put a spare part without analyzing your individual needs, you can get not exactly what you need. It is necessary to take into account exactly where the silent block will be installed, forward or backward. And the main thing is to buy products only from trusted suppliers so as not to buy counterfeit or defective ones.