Rating of the best rake for motoblocks for 2024

Any agricultural work is always hard physical labor, especially when working in large areas. Rakes for walk-behind tractors are far from a new invention that is in great demand among farmers. These attachments greatly facilitate the daily tasks of harvesting and harvesting hay, and are much more efficient than conventional cultivators. They allow you to turn the grass faster, increasing the overall quality of your work.

This review of the best rake for walk-behind tractors will tell you in detail how to choose a good model for a certain type of work, point out the advantages and disadvantages of fixtures, and also present a list of popular manufacturers.

Criteria for choosing a good rake for motoblocks

Rakes for walk-behind tractors are also called "rake-tedders" or a hinged structure for a walk-behind tractor. Rakes are considered attachments because of the special attachment to the adapter on the walk-behind tractor, which refers them to additional tools.

The main task of the device is collecting grass in windrows, as well as raking and wrapping hay. There is a huge selection of models from different manufacturers on the market, allowing you to perform a variety of actions. They all differ in technical characteristics.

The rake design usually consists of a rake beam with teeth, a frame with a hay dropping mechanism, a system of levers for raising and lowering the beam, and counterweights.

The device has the following principle of operation: an adapter is attached to the trailed bracket of the walk-behind tractor, on the seat of which the operator controls the equipment. When the machine is moving over the swath, the rake tines move the cut grass along the stubble base of the field, collecting it into a swath. When the tines reach a sufficient volume, the operator must move the handle to raise / lower the beam forward, after which the rake with the tines is raised, and the cleaning rods throw off the cut grass from the tines. Then the handle is pulled back again and the work continues in the same way.

Some craftsmen prefer not to buy equipment, but to make it on their own - this is quite possible by following the instructions for manufacturing and purchasing all the necessary spare parts. A well-made homemade rake will not be inferior in quality and efficiency, but you need to have certain skills to make a decent product as a result. Drawings and manufacturing diagrams can be found on the Internet, but it is best to purchase a finished device in a special store.

It is very important to follow the safety and operating rules: the rake should be stored in a dry place, and after use it should be washed and allowed to dry - this prolongs the service life of the equipment.

The direct advantages of using attachments, in addition to accelerating and increasing work efficiency, can also be attributed to the fact that the rake removes high and low grass stands without any problems, they are simple and convenient to use, have a universal design suitable for different types of walk-behind tractors and low-power tractors.

During operation, the roll is not contaminated by stones and earth.

Having understood the scheme of the rake for walk-behind tractors and their features, it is necessary to study the following characteristics to select the most suitable option.

Strength

The strength and quality of the material from which the rake is made determines their reliability and service life. The best option would be steel devices, since steel is the most resistant to corrosion. If the material is reliable and durable, then the device will serve the owner for more than 10 years, subject to the correct operating and storage conditions.

Functionality

Since all models are slightly different from each other, some of them can be much more flexible in use and simplify the process of packing hay. The functionality of the rake attachments can be attributed to their versatility, the width of coverage (the larger it is, the larger the area can be processed), the convenience of design, productivity, and the possibility of non-standard use. So, for example, some models are able to perfectly collect snow and clear paths from debris.

Manufacturer

The manufacturer plays an important role in the purchase of equipment. A reliable and high-quality supplier of equipment guarantees the quality and long service life of the equipment manufactured. There are a huge number of companies and firms on the market for the production of mounted rakes. You should pay attention to those that have long been in good demand among buyers, have a quality certificate and fame. It is important to view reviews of a model or manufacturer in online stores or forums where people share their opinion about the purchase. If a device from a particular company has positive reviews and a high rating, then it can be safely taken, unlike models that have only negative feedback or no feedback at all.

Construction type

The rake-nozzles for the walk-behind tractor have their own classification, consisting of different types, which are intended for different types of work. The units are divided according to the method of installation on roller and rake-tedders:

• Rollers are used to collect grass and level the plowed area. An adapter is used to connect such a device, and the structure is controlled using a lever. Such devices are made of stainless steel.
• Tedders or cross heads are used directly for tedding freshly cut grass. This helps it dry faster and more evenly, thus avoiding smoldering. With this installation, hay is collected in shafts, usually, this type of nozzle has large dimensions.

The cost

Each buyer has his own average price, at which he is guided when choosing a model. Your best bet is to purchase reputable devices at not too high or low cost, choosing an option that will suit your needs without sacrificing your wallet. So you can avoid disappointment when buying an expensive model that is not very efficient or vice versa. Low-cost products can be both very productive and weak, so you should weigh and review all the options before buying.

The best rake models for motoblocks

This is a rating of the most famous and reliable rakes for walk-behind tractors with a detailed description of the characteristics of each model, as well as their advantages and disadvantages in operation.

Neva

Devices for the "Neva" walk-behind tractor are universal and suitable for any type of equipment due to the presence of a special adapter. The average width of the rake is from 50 to 150 cm, which allows you to handle areas of different types and sizes.

The device has a spring base, due to which the rake passes smoothly along the ground, adjusting the amplitude required for movement. The nozzle is very flexible, which allows you to avoid malfunctions in the form of frequent breakdowns and curvature of the teeth, and thanks to the manual control mechanism, use becomes as comfortable as possible.

The design is able to work equally well with hay and leaves.

• stability and reliability;
• suitable for work in different areas;
• convenient design and control;
• large rake width;
• versatility.

• not found.

Sun

These attachments are specially designed for hay making, so their design is made so that the grass dries evenly and does not cake. The unit has thin beams of a rounded shape, with the help of which the cut grass can be easily turned over, as well as leaves and straw are raked up.

According to the varieties, such rakes are available with two, three and four wheels. The width of the treated area depends on the number of wheels. So, four-wheeled devices can work on an area of ​​about 3 meters. There is a popular model with five oblique wheels. Such a unit has a rather long length - almost 4 meters, and weighs 140 kg. With such equipment, the speed of harvesting is significantly increased, since in an hour you can remove hay from an area of ​​about 1 hectare.

The most popular models of the "Sun" type are Czech and BM-3. They work effectively over large areas.

• high speed of work;
• wide functionality;
• improving the quality of raw materials (hay does not cake);
• ease of use;
• variety of models.

• large dimensions.

SCOUT PL-3600

The agitator rake is specially designed to speed up hay harvesting and preserve the harvest. The device works in two directions at once - raking and tedding. With the help of three wheels, dense grass is quickly raked, formed into windrows for subsequent harvesting and drying.

The device works with mini-tractors SCOUT with a one-point suspension and motor-blocks SCOUT using the PL-35 adapter.

The structure includes a trailed frame with shock absorption, tubular wheel mounts and three discs with wheels. The working width is 1800 mm, the working speed is about 7-10 km / h, and the productivity is 0.9-1.3 hectares / hour, which is very good performance.

• reliable manufacturer;
• high speed;
• wide working range;
• work in two directions at once.

• suitable only for SCOUT devices.

SCOUT PL-1400

This compact equipment is made of high-quality metal that does not lend itself to corrosion and deformation, therefore, its use is effective in all weather conditions. This machine collects the grass after mowing. It is designed for summer cottages and territories up to 4-5 hectares.

Despite its small dimensions, the working width is 140 cm, and the maximum speed during operation is 6 km / h.

The model has positive reviews from many buyers.

• strength and reliability;
• quality material;
• small dimensions;
• good performance.

• suitable only for SCOUT equipment;
• processing of small areas.

Jarmet Z591

The model of a fairly well-known Polish manufacturer of attachments, which has established itself well in the market and has many positive reviews from buyers. The carousel device efficiently rakes the cut grass into swaths that are convenient for harvesting.

The rake has two spring-loaded rings and operates at speeds up to 12 km / h, has a capacity of up to 4 hectares / hour. The working width is 2.8 meters.

• excellent characteristics;
• reliable manufacturer;
• suitable for cleaning large areas.

• high price.

GPM-1

The unit is designed for raking the mowed masses and is suitable for working with walk-behind tractors with an engine power of at least 6 HP, with an AM-2 adapter. The coverage is 2 meters, which is great for cleaning any terrain, and the working speed reaches 3 km / h.

It is a compact and budget device that will fit perfectly into a farmer's arsenal and help you harvest faster.

• compactness;
• nice price;
• normal working width;
• excellent quality.

• low speed;
• fits one type of adapter.

Hay rake FZ

The rake of the Russian manufacturer, which is compatible with all types of motoblocks, that is, they are universal. They have a low weight - 80 kg and a coverage width of about 2 meters, which is quite enough for an average territory. The device removes hay and grass well, rolling them into volumetric windrows. The equipment is controlled using a lever. The adapter is not included with the model, therefore it must be purchased separately.

• small size;
• acceptable cost;
• versatility;
• sufficient working width;
• comfortable and durable design.

• adapter sold separately.

GPS 210 cm ЧБ 1к

Another model of a domestic company, which has a small size and does an excellent job of agricultural harvesting in medium-sized areas. The working width is 2 meters, like the previous device. To some extent, they are analogous, but not inferior to each other in quality and performance. The control is also carried out using the handle, and the adapter is purchased separately, while the rake is compatible with all walk-behind tractors.

• compatibility with all types;
• acceptable working width;
• low price;
• compactness;
• quality assurance.

• no adapter included.

VM tedder 4-wheeled CHB

This attachment is practical and economical to operate. It can either rake and roll the hay or stir it up for even drying. The device is compatible with all types of motoblocks, has 4 wheels and a coverage range of 1.4 meters. The model has proven itself well in the market and receives positive reviews. The design is lightweight - only 60 kg.

• functionality;
• small-sized design;
• versatility;
• pleasant cost;
• quality assurance and reliability.

• suitable for small areas.

VM tedder 3-wheeled

The equipment can both rake and stir up the cut grass to improve the quality of raw materials. It is made of hardened metal and has a durable, versatile design, all parts of which have passed the necessary government quality tests. The impeller hub has two bearings for long service life. The gripping range is 1.2 meters, there are three wheels and a lifting mechanism for easy maneuvering. The dimensions of the product are even smaller than those of previous models, and are 45 kg.

• low cost;
• quality and reliability;
• universal design;
• ease of use;
• manufacturability;
• diminutiveness.

• suitable for small areas.

general information

NAME	APPROXIMATE COST
"Neva"	Depends on the specific model
"Sun"	Depends on the specific model
"SCOUT" PL-3600	RUB 29,760
"SCOUT" PL-1400	RUB 21,440
Jarmet Z591	RUB 63 936
"GPM-1"	RUB 14,050
Hay rake FZ	RUB 12 800
"GPS 210" cm BW 1k	RUB 14,950
"Voroshilka VM" 4-wheeled CHB	RUB 15 600
"Tedder VM" 3-wheeled	RUB 11 900

This is a list of the best rake for walk-behind tractors, which presents a variety of models for agricultural work that meet all quality and reliability standards.