Rating of the best spearfishing reels for 2024

Purchase spearfishing guns also implies the purchase of a number of related products that simplify fishing. For example, such a gun will require a line, a damping device for a line, a reel and a separate reel line, a compensation device, an additional harpoon, in case the main and many other auxiliary devices are lost. The variety of accessories can be divided into two categories: necessary and those without which spearfishing is possible, at least for the first time. The coil is one of the essential items. Although it is believed in professional fishing circles that a good fisherman is able to hunt without accessories, the fishing standards for 2024 make it possible to simplify many processes with the help of quality uniforms.

The need for a reel is obvious - this device will simplify most of the monotonous hunting processes. In addition, thanks to this accessory, the fisherman can count on the safety of the gun itself in difficult situations. In the most unforeseen circumstances, such a rig can even save the life of an underwater hunter.

To the question: “Is the coil really necessary and how many hypothetical situations exist in which it is capable of providing intelligible help?” One can answer with a universal answer. The return motion mechanism is able to prevent many unpleasant situations typical for fishing. For example, an angler fired a harpoon into a fish, but did not fully hit it. In such situations, the fish will begin to break free and strive to go as deep as possible from the site of injury. If the fish is large, it will not be difficult for it to get rid of tench. In this case, the angler needs to throw out the gun, otherwise it will be impossible to float to the surface, because the line supply has dried up. Such an outcome is not uncommon, because a fish that has received an insufficient defeat behaves the same in all cases, it often goes into the crevices between the cameos, where it gets stuck together with the harpoon, and, accordingly, with the gun, if the latter does not have a mechanism with a return movement. Also, it is not uncommon for an angler to miss when firing a harpoon, after which the latter gets stuck in an obstacle or underwater clay. In this case, the gun will also have to be thrown away, because removing the harpoon from the obstacle is an extremely laborious process.

Technical aspects and precautions

Technically, such a mechanism, with all its advantages, can also become an additional extension point for the line. The mechanism is intended for extreme cases. It should be used only when surfacing without throwing the gun is not possible. Before use, you must make sure that there is no load on the reel, because this mechanism is easily supplied to deformations and dismantling, even if we are talking about not the largest fish on the harpoon. It is recommended to attach the line to the body by wrapping it several times.The mechanism does not allow unwinding when fired, so it is enough to release it from the safety catch in order to start a return movement if necessary.

Most guns for underwater fishing have a special socket for mounting reels. When buying a gun, it is recommended to make sure that a similar connector is available, if the gun has already been purchased, you should refer to the manufacturer's instructions to locate the attachment points of the accessory.

There are situations when it is necessary to fix the mechanism on the gun, but there are no mounting connectors. In this case, fastening with metal threaded clamps is allowed.

When buying a reel for a spearfishing gun, it is recommended to pay attention to the material of the device body. This accessory is available in two variations: metal and plastic. If the device is made of metal, the angler can count on the strength and reliability of the structure, but the cost of such a model will be an order of magnitude higher than the price of a plastic analogue. The main aspect when choosing is the overall design ergonomics. All elements of the gun should function without problems, the reel should not interfere with the mechanics of the rest of the structure. If the plastic attachment fits better with the overall architecture of the gun, it should be preferred, even if the budget allows for a metal accessory.

Pros and cons of the coil

The use of coils has a number of advantages and disadvantages. Although the advantages of such a mechanism are obvious, it is still worth weighing the disadvantages before purchasing an expensive copy.

• General balance disorders;
• A shotgun with a reel is more difficult to control;
• The device requires regular maintenance.

The advantages of the device are noticeably greater, in addition, the strengths of the mechanism cover all its mistakes.

• With the help of the coil, the impulses of the escaping fish can be neutralized;
• The gun does not have to be thrown away if the spear gets caught in an obstacle;
• It is not necessary to loosen the line tension;
• Some anglers note that harpoon placement is much easier with a reel.

The most obvious plus is the insurance of the gun in the event of a harpoon lashing with a limited line length. The reel can save the angler an impressive amount and a lot of time. It is worth considering the peculiarity of some foreign models of guns, which do not provide for a coil mounting mechanism. Similar designs are found among imported pneumatic models. The buyer can secure the coil using clamps or other methods, but such fasteners should be carried out only at their own peril and risk.

The best spearfishing reels

Spiro

Devices from the manufacturer Spiro are compatible with guns:

• Mares Cyrano Evo;
• Viper;
• Sniper.

Mares Vertical Spiro is designed for the new generation Cyrano Evo pneumatic guns from Spiro, as well as for the Viper and Spiner crossbows. Compatibility with implements from other manufacturers is not guaranteed. On sale are configurations with a spool volume of 65 m and an enlarged version of 87 m. A distinctive feature of the model is the vertical mount on the gun body. This method of fastening ensures minimal losses in the ergonomics and maneuverability of the gun. The model has a well thought-out lever-type trigger.

• Choice of configurations for 57 m and 87 m;
• Possibility of vertical mounting on the body;
• Sophisticated trigger.

• Not the cheapest option;
• Not compatible with all guns.

Feedback:

“I bought a coil from Spiro on the recommendation of an experienced friend. I bought a model for 57 meters, because it is difficult for me to imagine a situation in which the length of a line of 87 m would be relevant.I have not yet experienced the device in practice, since I avoid dangerous situations, but I can say that the vertical mount and adequate weight allow using device with almost no loss of maneuverability. I can advise those anglers who are looking for a good option that does not weigh down the gun! ”

Seac sub

One of the more standard options. This model has a rather convenient locking device, which is important for an accessory of this kind. The body is made of a special shockproof plastic, and the axis of the structure is made of metal. It is worth noting the relatively small container for the line, the hopper only supports 30 m / 2 mm. It is perfectly compatible with Seac Sub crossbows of all models; it is enough to install the accessory in the grooves of the connector on the gun body in a standard way.

• Shockproof plastic housing;
• Convenient stopper;
• Metal axle;
• Fully compatible with Seac Sub crossbows.

• Small capacity.

Feedback:

“I got this model for a crossbow from the same manufacturer. The coil got up without any problems, without making the structure heavier. In part, this is due to its miniature dimensions, because the container for the tench can hold only 30 m.On the other hand, in practice this length is sufficient. I once had to use the return motion function and there were no problems with the length. I recommend this model to all owners of Seac Sub crossbows! ”

Scorpena

Devices from Scorpen, like Spiro, offer the user a vertical mount on the body, which has a positive effect on the ergonomics of the weapon. The design features of the accessory allow you to position the line as evenly as possible along the guide channel. The body is made of a special aluminum alloy, which, on the one hand, gives it strength, and on the other hand, provides an adequate weight load on the gun, because aluminum is a light metal. The dimensions of the spool for laying the line in the main part of the accessory have sufficient space for 60 and 70 meters in length. The connector on the coil body contains two holes through which the device is connected to the tool by means of clamps. This type of attachment is universal and allows you to fix the coil on the bodies of guns of different diameters. A mechanism for adjusting the speed of rotation of the device is also provided.

• Metal body;
• Universal mount;
• A spool with a container for 60 and 70 meters;
• Rotation speed regulation.

• Not the cheapest model.

Feedback:

“The 70m Scorpen coil is already the second in my collection. I have been engaged in spearfishing for over 15 years, I used to use a reel with a small container. Until recently, 40 meters in length was enough for me, but now I hunt in especially difficult conditions and for large fish, so cases when a fish carry a harpoon to an impressive depth are not rare. Scorpion 70 meters is a great option for me, especially with a speed control mechanism. I recommend this model to all anglers who are engaged in spearfishing on a professional level! ”

Beuchat marlin

This model has a small size and a reversing mechanism. Anglers note its effectiveness at impressive depths. The spool supports line sizes of 50m / 2mm and 70m / 1.7mm. There is a possibility to adjust the rotation speed. Vertical mount, guaranteed compatibility with Beuchat Marlin shotguns.

• Rotation speed control;
• Reversible mechanism;
• Efficiency at an impressive depth.

• Not found.

Feedback:

“I have been using this reel for over a year. For all the time I have never failed, although I had to use it quite often. I recommend to all fans of spearfishing at an impressive depth! ”

Huntriver horizontal mount

The body of the accessory is made of aluminum-based alloys. The material of manufacture provided the structure with strength and lightness, which is important for an accessory of this type. The spool capacity is 30m / 2mm. The design has a locking mechanism in the form of a nut with a specially finished surface. The design features allow it to be fixed to guns of all sizes using clamps.

• Robust body;
• Universal mount;
• Locking mechanism.

• Not found.

Feedback:

“I've used this model before, but replaced it with a larger one. The coil is of good quality, did not cause any complaints. I recommend this model to all spearfishing beginners! ”

Outcome

The coil is a device, although not related to the category of necessary ones, nevertheless, it is important when it comes to productive spearfishing. Modern realities make it possible to integrate such mechanisms into the design of amateur rifles, although some time ago these devices were found only in professional underwater weapons. This mechanism is indispensable if the angler intends to hunt trophy fish for a long time and scrupulously. In addition, there are rarely favorable conditions for hunting under water, so it will not be superfluous to reinsure the gun with a reel, because it will allow you to keep the gun even in difficult situations.

Purchase recommendations

When buying such a mechanism, it is recommended to follow a number of general rules:

1. Size affects its quality. Speaking of dimensions, the length and thickness of the line should be taken into account. A certain coil is sharpened for certain dimensions, so the dimensions of a line for one copy cannot be installed in a model of a different configuration. If the dimensions of the line correspond to the indicators of 10m / 2mm, then the model for a 55 mm spool will be more than enough. It is also worth considering that the size of the model is proportional to its weight, which means it will affect the overall maneuverability of the gun.
2. Body material. As in the first point, the aspect of the material depends on the load on the implement. If the angler is used to hunting accurately, and his movements are measured, a plastic reel will suffice. In addition, plastic models have an advantage over metal ones, which lies in their low weight. If the angler wants to get the maximum reliability from the device, he should pay attention to metal models, which will also show an increased price tag for increased reliability.
3. Possibility to install a carabiner instead of a shock-absorbing device. Many anglers dismantle the shock absorbing device when installing the reel, and install a carabiner in its place. In this case, the coil will perform the shock-absorbing function.
4. Before purchasing a specific model, it is recommended to consult with experienced users if possible, or seek advice on the forums of the relevant topic.

If the gun is purchased from a specialist store, the seller will most likely recommend purchasing a reel as well. He will help you choose the most suitable option and give all the necessary advice on operation. It is worth considering the peculiarities of some models of guns, on which it is impossible to install third-party reels. For example, some underwater crossbows do not allow the use of third-party uniforms, this is due to the specific architecture of the weapon. Some craftsmen are able to install body kits even on specific specimens by means of clamps and other auxiliary fasteners, but such methods are made on their own responsibility. Plus, if the weapon is under warranty, such integrations can get in the way.

It is also worth trying on the coil before buying it. She should stand in such a way as not to block the line and other elements and mechanics of the weapon. Otherwise, the effectiveness of the gun may be noticeably reduced. It is worth paying attention to the quality of the material of manufacture, regardless of whether it is metal or plastic. In both cases, an unscrupulous manufacturer can save on material, which will definitely affect the quality of hunting.