Rating of the best adhesives for PVC boats for 2024

Boats made of polyvinyl chloride are comfortable and reliable. They are affordable and very practical. This product is very popular with fishermen. Many hunters buy such products for tracking game from the water. The boat is compact. It can be put into any type of transport. The inflatable device is equipped with a flat bottom that allows you to swim in shallow bodies of water. Anyone can operate the boat alone.

However, this product has disadvantages. PVC material is not very strong. Therefore, boats from it are often pierced. But this defect is very easy to eliminate. Any user will be able to glue the cut with their own hands using a special glue for PVC boats. The exception is holes longer than 15 cm.

Selection recommendations

To eliminate the cut, you must choose the right adhesive. It must be endowed with the following qualities:

• high bonding properties;
• uniformity;
• resistant to sun and water.

Not every manufacturer can boast of the above qualities of their products. Many types of adhesives turn yellow over time and make the patch look unattractive. All this speaks of the low quality of the product, such a gluing will last a short time. The experts have selected the best adhesives for PVC. They will reliably glue any boat and allow it to serve its owner for many years.

For the correct selection of glue, several criteria must be taken into account. These include:

1. The price range should be above average. High quality products cannot cost little money.
2. The adhesive should only be made for bonding and repairing inflatable boats.
3. High quality products should not stick to your fingers.

The adhesive must have excellent water resistance and tolerate large temperature changes.
It is better to use a liquid patch to seal small punctures and cuts. If you need to repair the oarlock or seat, a one-component product will do. Large cuts are much more complicated. This requires a reliable two-component adhesive. If the user of an inflatable boat pierced it for the first time, then you need to think very carefully. You do not need to purchase a cyanogen adhesive. This component is added to the quick gluing compound, which has several negative points:

• there is no good elasticity after drying;
• the chemical composition is poorly resistant to temperature differences;
• gluing does not have the required durability.

Very often, an inflatable boat comes with a tube of glue.It is excellent for patching punctures as it is specially made for a specific PVC grade. Such a composition will ensure reliable gluing of the two elements.

Types of products

Currently, the developers have presented a wide range of PVC boat adhesives. Therefore, the buyer needs to understand the varieties and types of these products. There are two types of adhesive masses: with one-component and two-component composition. The first type is most often used to repair damaged hardware:

• special seat mountings;
• transom;
• oarlocks;
• rings.

One-component adhesive mixtures have advantages. They are inexpensive and dry for a minimum period of time. It is convenient to take such a composition with you on a hike. The fast drying time is very practical. The main disadvantage is that this tool is poorly suited for patching the boat hull.

Two-component adhesives are somewhat more expensive. They have the following positive properties:

• tolerate temperature differences well;
• their elasticity is at a high level;
• glued surfaces can be used for a long period of time.

Many manufacturers make bicomponent mixes specifically for PVC material. Such glue will reliably hold together any fittings, small punctures and large cuts on the body of the inflatable boat.

Recommendations for use

In order to reliably seal the cut, the surfaces must be properly prepared:

• the first step is to deflate the boat;
• the surfaces to be glued must be well washed and dried;
• to prevent the formation of folds, it is recommended to put a flat board under the working area;
• before gluing, the surfaces must be degreased with any solvent.

At this stage, preliminary work is completed.

Instructions for use

The area that will need to be glued must be cleaned of dust and dirt. It is not recommended to use sandpaper as it can damage the PVC material. Further it is necessary:

1. The surfaces to be glued are degreased with acetone or another solvent. The instructions must be followed exactly, otherwise the material may be damaged.
2. To cut a patch of the desired size and configuration, the size of the cut must be taken into account. After all, punctures come in a variety of formats. Therefore, the size of the patch should be several centimeters larger than the size of the defective spot. The cut piece of rubber is applied to the damaged area and trace around it with a marker or pencil.
3. A thin layer of adhesive is applied to the cut out patch and the place of gluing. The composition should dry within 10 minutes. Then apply 1 more layer of glue to both surfaces. It should be kept outdoors for about 2 minutes.
4. Before gluing, it is recommended to warm up the defective place with a hairdryer and then apply the prepared patch.
5. Then it is necessary to remove the air gap from the entire area. To do this, both surfaces must be rolled with an effort. It is better to use the product 2-3 days after gluing.

Minor damages can simply be filled with glue. If the defect is larger than 5 cm, it is better to use 2 patches. One is placed on the inside, and the other on the outside.

Popularity rating of the best squads

Currently, manufacturers provide a wide range of repair kits for gluing. Buyers have a wide choice. Each tube of glue contains detailed instructions for repairing inflatable boats with your own hands. However, not all manufacturers indicate the real positive and negative aspects of their products. The best brands of glue will be discussed below.

Most inexpensive

PVC moment

In Russia, you cannot find a person who does not know anything about this brand. Any type of glue can be purchased under the Moment brand, and advertising from this manufacturer is very extensive, so it is incredibly popular.And if the product could be put in the first place in recognition of its recognition, then in its qualities the glue is far from the leading position.

People who repair PVC boats on a professional basis react negatively to the brand, due to the discrepancy between the declared quality and the real one. At the same time, no one advises to bypass the Moment. It is really capable of gluing parts together, and the layman may well use it. However, there are more effective, and also attractively priced options.

Price: 95 rubles. (30 ml).

• can be easily found in various stores and supermarkets;
• water resistant, can be used for boat repair;
• easy to use.

• the glue loses its properties when exposed to the sun for a long time;
• if gasoline, oil or other solvent gets on the patch, the adhesive layer will collapse;
• high toxicity.

Vial I-900

Many users of specialized forums agreed that it is much better to use one-component glue when piercing a boat. There is an opinion that such funds are easier to place, there is no need to measure the components in strict proportions. However, Vial glue is contrary to established practice. The difficulty lies in the speed of setting and drying of the glue, which is calculated in seconds. After that, it is impossible to correct the defects that have arisen.

The glue must be applied to the placed patch, the surface of which has been carefully processed. The result is monolithic connected parts that have become one whole. The secret of the glue lies in its ability to heat the rubber surface, due to which tight adhesion is carried out. With Vial glue, any puncture can be removed in a few minutes. You don't need to mix anything, just take the tube with you on the road.

Price: 100 rubles. (25 ml).

• tight adhesion;
• no need to mix.

• not found.

Bostik NE486

In the first place was a two-component product that copes well not only with punctures of PVC boats, but also with the repair of other rubber products. There are many positive reviews about this glue from both ordinary boating enthusiasts and professionals in the field of repair. Although its price may seem overpriced to someone, it quickly pays off due to quality results. The material bond is strong enough to withstand constant stress.

The glue is sold in cans of 1 liter, this volume is enough for a huge number of repairs. In everyday life, the need is not so great, so buying it at home is impractical, while for a professional Bostik can become an indispensable tool. Those users, whose boat is permanently damaged for whatever reason, can purchase this product and not regret it. It is also noteworthy that in addition to rubber products, it can be used to join parts made of wood, metal or leather. Before use, it is recommended to read the instructions and study all the nuances of working with different materials.

Price: 100 rubles. (25 ml).

• withstands high temperatures (up to 80 degrees Celsius);
• not subject to destruction upon contact with solvents;
• excellent adhesion;
• strong and resistant adhesive layer;
• the seam does not diverge with temperature changes.

• highly toxic, it is allowed to work with gloves and a respirator.

Three whales

PVC repair professionals do not like this product. He is credited with fragility, poor adhesion and unsuitability for major repairs. Glue under the Tri Kita brand got into this rating due to its low price. On the one hand, it is not suitable for a complete renovation. At the same time, it is effective as a temporary solution, in case the boat is leaky at the exit and there are no other options.

The product is one-component, transparent in color. It is easy to apply and does not have to wait long to dry completely. You won't need a heavy press either.Three Kita Glue is a fast solution for urgent puncture repair. In stationary conditions, the procedure for gluing parts will need to be repeated using a higher quality product. However, it makes sense to purchase a tube of glue at the price of 70 rubles and keep it nearby in case of unforeseen breakdowns.

Price: 70 rubles. (50 ml).

• easy to apply;
• you do not have to wait long until it dries completely.

• not found.

Average price category

Super NN

Most often, professional products cost a lot of money. However, the glue of the presented brand is an exception. Its composition has a one-component structure and is made on the basis of polyurethane resin. The mass does not need to be thinned or hardeners added. The adhesive is immediately ready for use. It is often used by professionals in their workshops, since the mass has excellent parameters. For example, the shear stability of the seam is about 1500 kg. A very good result. The glued surface can withstand temperature extremes from -40 to +80 degrees.

Fresh mass has a transparent color. However, users note that over time, the composition begins to turn yellow. This fact can be attributed to a negative point. Because of this, the glue is ranked low. In a domestic environment, the composition is not used.

Price: 450 rubles. (1000 ml).

• does not need to be diluted;
• ready to use immediately.

• the composition is not used in everyday life;
• the composition begins to turn yellow.

Bravo SP17

The glue is made in the USA. The products of this brand have professional parameters. However, the adhesive mass has a rather high price, which negatively affected the rating. The composition of the products is developed using the most modern technologies. It is not often possible to see a professional version in stores, which is made exclusively in America.

In our country, there are still few product reviews. But there are plenty of them in America. Users speak positively about the adhesive mass and call it the best for repairing PVC inflatable boats. You can also add that the composition has universal characteristics, it can glue any synthetic products, as well as materials made on the basis of polymer and natural rubber. The mass dries up in just a few minutes. It turns out that you can repair a thing very quickly. The end result is quite high quality, the product will last a long time. Therefore, you should always have a tube of glue of the presented brand with you when fishing. He will be able to glue the inflatable boat in any situation.

Price: 700 rubles. (20 ml)

• the composition has universal characteristics;
• quality.

• not found.

Rogneda UR-600

If the rubber boat is handled with care, then the need for its repair may not arise. It is not economically feasible to purchase an expensive tube to fix a single puncture. A multi-purpose adhesive capable of bonding any natural or synthetic surface would be the best option in this situation. Rogneda can be used to glue metal, wood, plastic, fabric and silicone products. With this tool, shoes are repaired and seams are glued on linoleum.

Rogneda is excellent for rubber boat repair. You don't need to mix anything to get the glue. Only before direct application, the mixture must be gently stirred. The glue is resistant to moisture, and although its top layer turns yellow over time, this does not affect its adhesive layer. Rogneda cannot be attributed to the best means for repairing PVC boats, but as a universal adhesives that should be in any home, it has shown itself to be excellent. Another advantage of this product is the absence of toxic components in the composition.

Price: 520 rubles. (750 ml).

• you don't need to mix anything;
• resistant to moisture.

• not found.

Expensive and high quality

Reaktor liquid patch

People often share their experience on the use and repair of rubber boats in specialized forums.In positive reviews, Liquid Patch is often mentioned. However, most of the praise for this product comes from ordinary users, while professionals do not trust it too much. First of all, the liquid patch is easy to use, despite the fact that there are 3 main components in the composition.

There is no need to purchase a patch to repair a boat with this glue. The polymer is converted into it as a result of drying. The components of the glue are mixed and the resulting mixture is applied to the damaged area. No need to press down on the patch or place it under a press. The main thing is to let the glue dry well, for this you do not need to touch the patch for 12 hours. If the buyer is not satisfied with the viscosity of the finished product, he can purchase the components himself and mix them to obtain the desired consistency. In this case, it is recommended to buy components from one manufacturer.

Price: 1 400 rubles. (1000 ml).

• speed of repair;
• suitable for gluing internal seams of a boat;
• no need to use a brush;
• to repair punctures and cracks, you do not need to buy a patch.

• glue is highly toxic;
• small assortment;
• large holes require a patch;
• impossibility to repair the fittings with patches.

Kleyberg

Adhesives designed for PVC boats are conventionally divided into 2 types: professional and ordinary. The second category is more popular with buyers. Conventional formulations are easy to use, you do not need to buy any tools for them. Kleyberg belongs to the professional product category and is therefore available in large 15 kg packs.

On specialized forums, you can find a lot of positive reviews about this product. It does an excellent job of bonding rubber and PVC surfaces. In addition, the adhesive has been successfully applied to leather, plastic and silicone products. It stays high at temperatures ranging from 40 degrees Celsius to 70 degrees Celsius. Kleyberg has the best characteristics, but those who are just learning the basics of repairing PVC products should pay attention to simple one-component products. It's much easier to work with them.

The cost is 4 600 rubles. (15 l).

• water resistance;
• dense structure;
• excellent adhesion.

• properties are lost at low temperatures;
• storage conditions provide for a warm room (from +15 degrees Celsius).

Wakol MS 552

This universal adhesive will bond any PVC-based material. With this composition, you can fix not only an inflatable boat, but all things made on the basis of polyvinyl chloride can be repaired. A large number of adhesives with different properties are not required. WAKOL will cope with all the problems and difficulties.

The glue is not professional. It is created on the basis of a modified polymer, which makes the bonding area a whole monolith. However, such products are expensive. Therefore, it is not produced in small containers. This was the reason for the location of the glue in such a place in the popularity rating. Although the composition has excellent characteristics.

Price: 9800 rubles. 7.5 l

• excellent adhesive characteristics;
• universal.

• high consumption.

Outcome

First of all, you need to pay attention to the quality of the glue and its properties. Cheap options do not always guarantee a reliable and durable result. To eliminate the puncture, you must study the instructions and strictly follow them.

In conclusion, we can draw conclusions which of the means is the best:

1. In a situation of small punctures and cracks, liquid patch will be salvation.
2. If it is necessary to replace the PVC fabric, a two-component adhesive is needed to bond the patch.
3. It is best to correct any defects in boat accessories with a one-component product.
4. It is recommended to take small road options on the road.
5. Serious permanent repairs must be done with professional two-component adhesive.

To choose a glue for repairing a PVC boat, you need to study the characteristics of the best compositions, as well as read user reviews.