Rating of the best car battery terminals for 2024

Machine parts are subject to negative wear effects and the battery is at a particular risk. Correct operation of this component depends on the quality of service. The power supply of the car directly depends on the battery terminals, so you should pay attention to this spare part. A car enthusiast who does not have rich experience runs the risk of facing difficulties in choosing when it comes to replacing a worn-out terminal with a new one. The market offers a wide range of parts in this category, so you need to learn a number of basic points in order not to miscalculate when buying.

General Provisions

The battery device assumes the accumulation of energy with the subsequent distribution of it between the devices of the machine. Batteries are found in different categories and specifics. Different car models require different characteristics in terms of energy consumption, therefore, for a specific vehicle, an appropriate power device will be required that can meet at least the minimum requirements of the car.

The contact between the battery and the devices occurs due to the terminals, therefore the stability of the system as a whole depends on the quality of this intermediary. The main reasons for the failure of this part are mechanical damage or the negative effects of oxidizing processes. Of course, the first problem will require a complete replacement of the part, and the second can be solved by simply cleaning the terminals. It is worth considering that a part that has once undergone a destructive effect will have a negative effect on the contact component of the battery. This is fraught with disruption of the stable operation of the car as a whole, because a damaged contact part on the battery will not allow the engine to start quickly, because this requires a current with a stable voltage.

In order not to make a mistake when buying, you need to familiarize yourself with the varieties of the part. The terminals are divided into 3 categories according to the material of manufacture. The market offers the following varieties of this spare part:

• Lead terminal.

The most popular category among car enthusiasts. The popularity is due to the increased conductivity of the current, the pliability of the material, and ease of handling (when it is necessary to make additional fastening). The material is in contact with the battery without any problems, without producing side effects. Also, this metal naturally combines with the contact component of the battery, because this part is also made on the basis of lead alloys.

• Brass terminal.

Although this material outperforms the previous category in weight, the conductivity values ​​are also increased. The pliability of metal is not inferior in qualities to lead, therefore, such a terminal is also convenient in handling. The advantages of the brass part are simplified dismantling, which will help the car enthusiast get out of a number of difficult situations.The resistance of the metal to elevated temperatures is also an advantage.

• Copper terminal.

Copper parts are recommended by specialists as the most optimal for the car. Highest conductivity with reduced risk of oxidation and resistance to high temperatures.

Best battery terminals

Terminals from Glavdor firm Gl-61 model

The company Glavdor specializes in the sale of high quality spare parts The domestic manufacturer offers a wide selection of auto accessories, including terminals. The car enthusiast is offered a choice from the main categories of terminals in standard configurations. Model gl-61 kit includes a pair of brass terminals. In stores, the model is available at a price of 200 rubles. It's inexpensive considering the product category. The surface of the parts is painted in a bright color.

• Democratic price tag;
• Strong quality;
• Positive feedback on the model.

• The company hasn't built a solid reputation yet.

Feedback:

“I have been using this model for half a year now and there have been no complaints. Stable current conductivity, reliable grip. Not a bad option for a similar price, although it is noticeable that brass is not in its pure form. Would recommend to anyone looking for reliable terminals at a reasonable cost! ”

Terminals from Glavdor firm Gl-62 model

A product from the economy segment from a domestic manufacturer. Made of lead, designed for the economical buyer. When buying this model, you should take into account the specifics of the material and its resistance to high and low temperatures. In addition, the parts are made of lead alloy. The surface is painted in a bright silvery color. Dimensions are 9 by 2 mm and 5 by 12 mm. The kit includes a pair of terminals. The price of the kit differs depending on the seller. The average cost is 160 rubles.

• Low cost;
• Sophisticated design;
• Ease of handling.

• There are few reviews about the model on the Internet.

Feedback:

“I use this model as an intermediate one, in the future I will buy a brass one. As a temporary measure, these terminals perform well. The conductivity is sufficient, and the resistance to high temperatures is poor. I recommend this model to anyone looking for a temporary replacement! ”

Terminals from Alca model 509000

Model from a German manufacturer. Although the brand's accessories are manufactured in China, the result meets German quality standards. The company is popular among car enthusiasts and enjoys a reputation as a manufacturer of reliable parts. Model 509000 is made of brass and tin alloy. Such a connection ensures stable current conductivity, strong adhesion to the battery elements and reduced resistance. The kit includes 2 pcs. dimensions 110 by 119 mm and 50 mm in height. The average cost of a model is 250 rubles.

• Reliable quality;
• Reduced resistance;
• Affordable price.

• Not found.

Feedback:

“I have been using Alca terminals for over a year. There are no complaints for a similar price, moreover, the parts are made of brass. The model shows good results in current conductivity and operation at elevated temperatures. Would recommend to anyone looking for brass terminals for a reasonable price! ”

Autoprofi terminals Bat / Ter-102 model

The domestic manufacturer of auto components offers a wide range of terminals of different categories. The company has built a reputation as a reliable manufacturer of automotive products. The company's products are in the segment of affordable prices, therefore they are popular among the people. The bat / ter-102 model is universal and will fit most batteries.

• Affordable price;
• Model quality;
• Ease of handling.

• Few reviews.

Feedback:

“The bat / ter-102 model from Avtoprofi serves as a spare for me.Among my friends, many people who use this model as a regular one spoke positively about this terminal, so I decided to purchase it, but for now as a reserve. Would recommend to anyone looking for a spare part! ”

Autoprofi terminals Bat / Ter-101 model

This model is largely identical to the previous one, the difference between the copies lies in the nuances of the fastening. Terminals are made of lead alloy, on sale it is found at prices from 113 rubles. When purchasing this copy, it is worth considering the specifics of lead regarding operation at high and low temperatures and current conductivity.

• Affordable price;
• Terminal quality;
• Stable conductivity.

• Not identified.

Feedback:

“I am using this terminal temporarily and in this sense it shows good work. There are complaints about resistance to high temperatures, but for this price, such nuances are acceptable. Would recommend to anyone looking for a replacement main part! ”

Preventive measures and repair of damaged parts

Certain types of batteries require protective hoops. These rings are essential to prevent oxidative damage. Although these tools are not capable of providing complete terminal protection, you should not neglect the rings. In addition, hoops with an additional clip are often placed on premium batteries.

Pay attention to cleaning the terminals. Previously, motorists used their own devices for such operations, now, modern technologies allow cleaning at a professional level. A cylinder-shaped device for cleaning the terminals is called a scraper.

Using the device described above, it is necessary to clean the spare part. If problems arise with the contact of the terminal, it is necessary to remove a small layer of the metal surface. This will help increase the contact area. After that, it is necessary to clean the current taps to avoid the effect of oxidative action. In case the car owner does not have a scraper, it is allowed to use sandpaper. It should be borne in mind that in this case, the quality of the operation will decrease by an order of magnitude. After cleaning the electrical current taps, the battery box must be cleaned with a soda-based solution.

Contact problems

If the contacts with the current taps are not correct, there is a risk of excessive heating of the terminals, which leads to a negative effect. Also, excessive heating occurs for the following reasons:

• Dirt build-up on the current outlet and terminals;
• Failure of the fastener device;
• The negative effect of mechanical damage.

It is worth considering that the decisive role in the quality of current conductivity is played by the adhesion between the terminal elements and the battery. In addition, a tight adhesion will provide protection against excessive heating, because current leakage in such a situation is minimized. Weak adhesion leads to increased current resistance, which guarantees problems when starting the machine. Increased resistance implies a decrease in current flows, which is why problems arise at the car factory. Not infrequently, in order to eliminate such a problem, it will be necessary to carry out cleaning using the means of the above-described tool, having previously disassembled the connection from the terminals. If this spare part has undergone mechanical damage, you should purchase a new one to replace the old one.

Spare parts lubrication

After carrying out cleaning operations, it is necessary to ensure the protection of the parts by means of auxiliary preparations. It is important to pay attention to external protection, not internal. Non-ferrous metal undergoes oxidation faster than other metals. Lead is more at risk than others - this material is exposed to harmful effects in a short time and is covered with a protective layer. It is necessary to use lubricating additives after installing the battery and connecting the machine's power supply system to it. There is an opinion among motorists that lubricants are capable of conducting electricity.This is a myth, because modern manufacturers add elements that extinguish electricity to the additive. Such means can only reduce the flow of energy. The main task of additives is to protect parts from harmful effects and oxidative effects.

It is important to take into account that in case of damage to the terminal by oxidation, lubricant additives will not have a positive effect. If the above problem occurs, remove the battery, clean the terminals and remove a thin layer of metal from the surface. Then reassemble and lubricate the parts.

The material of the terminals is an order of magnitude superior to their predecessors 30 years ago. Also, the engine system in modern cars produces significantly less pollution, and the battery boxes are arranged according to the standards of tightness and strength. In addition, manufacturers provide their own products with anti-harm mechanisms.

If the car owner has a premium battery that meets quality standards and is protected against oxidation, the use of lubricants is not necessary. Such means will have a noticeable effect if the car's battery belongs to the economy segment and does not have reliable protection. Such specimens oxidize not only the terminals, but also the area around. It should be borne in mind that grease is not able to fully compensate for the shortcomings of the battery; the tool provides relief in the short term. In case of a cheap battery problem, it is recommended to get a more reliable one. The car owner has the right to refuse the means of protecting the battery, but for the stable operation of the car, it is recommended not to neglect the means of protection.

Protection means

The car owner who decides to provide the car with additional protection will find a wide range of means for this. It is recommended to visit a specialized store and seek advice from the seller, because there is no universal remedy. The choice of lubricant depends on the type of connection, therefore it is necessary to know exactly the material of manufacture of the terminals and battery contacts.

Litol 24 is popular among car owners due to its solid reputation as a versatile additive. The popularity is due to the fact that in the past this supplement was considered the only one in the protection category. The modern market offers a variety of products for specific compounds, so it is recommended to approach the choice responsibly, without resorting to general options that have gained a reputation only due to the lack of competition.

Outcome

The car owner, who is familiar with the general situation on the market, can easily make the right choice. An important role is played by the climatic conditions in which the driver lives. For example, if the driver lives in the northern part of the country, it is not recommended to purchase brass parts. This is due to the instability of such a metal against low temperatures. In addition, if the temperature drops below 15 degrees below zero, dismantling the terminal will result in a breakdown for the car owner. In the above scenarios, it is recommended to purchase lead parts. This metal is more malleable and less vulnerable to low temperatures. Copper parts are recommended for drivers whose cars are equipped with an impressive amount of electronics and require increased electricity consumption. For example, if a powerful sound system is installed in a car, it is necessary to select the appropriate power supply with reliable elements made of strong materials.

Brass parts work well as a solid medium. These parts are popular with those who do not want to buy cheap lead or expensive copper. The material is of high quality, but it is necessary to take into account the incompatibility of brass with low temperature conditions.

Also, it is worth paying attention to the terminal device. The market is full of items with different devices for all occasions and with universal communications. It is worth examining the features of a particular car in order to select the required "communication architecture" in the terminal.