Take care of your teeth when you are young! If all people followed this proverb, this would allow them to maintain oral health and quality of life for many years. Unfortunately, our mentality, unlike the American one, does not imply careful dental care, as a result of which, already in middle age, many are faced with the need to install dentures in order to fully eat.
Caring for such a structure is even more difficult than for the oral cavity. It should also be cleaned at least twice a day, and after each meal, remove and rinse under running water. This is necessary in order to avoid the accumulation of pathogens between the gum and the apparatus, which can lead to inflammation.
Wearing dental structures around the clock is not recommended, as it causes discomfort and causes minor damage to the gums. In order for a denture to serve for a long time, it must be kept clean. For storage of removable structures, it is recommended to use special containers that allow them to be kept absolutely clean and protect from mechanical damage and contamination from the external environment.
Content
Previously, many users of removable devices kept them in a glass of plain water. This is due to the fact that the structure was made of plastic compound, which deteriorated from drying out in air.
Modern orthodontic appliances do not have this disadvantage and therefore do not require constant moisture. Many users, on the advice of a dentist, wear them at first without taking off, in order to get used to it faster. About a month after the first installation, you can remove the device overnight.
Before putting it into storage, you should mechanically clean the device from food residues and other contaminants and rinse it in running water. If it is assumed that the structure is removed for a short period of time, you can simply wrap it in a napkin, or put it in a special case. If long-term storage is required, a special liquid is poured into the container, which not only disinfects the device, but also helps to preserve its consumer properties.
Some artificial teeth can be stored without liquid for a long time, it is enough just to tightly close the lid of the case in order to prevent contamination from the external environment.
Each user of removable teeth should remember that they cannot be stored in hot (because of this, they may lose their original shape, deform) or chlorinated water (this applies, mainly, to cermets, which are subject to darkening when interacting with chlorine).
Dental constructions containers are a case made of composite materials (most often polypropylene). They are designed to perform the following functions:
Compared to conventional containers, containers provide the following advantages:
Consider what to look for when buying a container so as not to make mistakes when choosing:
Experts recommend when buying to pay attention to the tightness of the closure of the lid (which will prevent accidental spillage of the disinfectant), as well as to the flat surface of the bottom (the case must stand level and stable so that the disinfectant liquid completely covers the dental structure).
The less weight the device is, the more convenient it is to take it with you, so this parameter is also worth paying attention to.
Depending on the functional construct, the following types of containers are distinguished:
Some customers consider buying a special case a stupid waste of money and store removable structures in a glass of water. It is important to understand that this is an ideal breeding ground for bacteria that can further irritate and inflame the oral cavity.
The container is made in the form of a rectangular white box with a green / blue insert. Suitable for dental constructions of any size. For easy rinsing and removal, the container has a special mesh container.
Anyone can use the device - you need to fill it with a special liquid to a certain level, and then add water to the solution. The detachable design can be left in the case overnight, during which time it will be completely cleaned of all dirt.
The lid closes tightly, the possibility of leakage is excluded. Store the device out of the reach of children.
Specifications:
Index | Value |
---|---|
Manufacturer | Curaden International AG, Switzerland |
Colour | white |
Overall dimensions (w * d * d) | 8.5cm * 7.5cm * 8cm |
The presence of a mesh insert | there is |
The presence of a mirror | not |
Ultrasonic cleaning | not |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 900 p. |
A small pouch that allows you to carry the removable design and wash it. The container has a mesh separator with a handle, designed for rinsing the product. The case is made of soft food grade plastic. Do not use abrasive substances to clean it. Experts recommend using water-based products approved for use with plastics. The product is lightweight - only 80 grams.
The lid hermetically protects the artificial teeth from dust, dirt and prevents the possibility of disinfectant spills.
Specifications:
Index | Value |
---|---|
Manufacturer | Bradex, Republic of China |
Colour | White black |
Overall dimensions (w * d * d) | 6cm * 9cm * 9.5cm |
The presence of a mesh insert | there is |
The presence of a mirror | not |
Ultrasonic cleaning | not |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 200 p. |
This case is one of the best manufacturers of oral care products. The popularity of models of this type is due to the presence of an additional compartment in which you can store a brush for cleaning the prosthesis (included in the delivery set, equipped with two heads of different hardness), tablets for a disinfectant solution, and other hygiene items.
Many buyers advise buying such a case because of the successful brush for cleaning the removable structure - its head with white bristles cleans the outer surface of the prosthesis, and the black head cleans the inner cavity. A mirror is built into the container lid, allowing you to install the structure anywhere. Another advantage of the device is the presence of a lock on the lid, which completely excludes the possibility of accidental spillage of the disinfectant. The delivery set also includes instructions describing the case, and recommendations on how to properly store prostheses in it.
Specifications:
Index | Value |
---|---|
Manufacturer | Hager & Werken, Germany |
Colour | white |
Overall dimensions (w * d * d) | 9cm * 11.5cm * 4.5cm |
The presence of a mesh insert | not |
The presence of a mirror | there is |
Ultrasonic cleaning | not |
Backlight presence | not |
Compartment for storing hygiene items | there is |
average price | 990 p. |
The most budgetary modification of the storage tank for artificial teeth. It is a case made of inexpensive plastic, available in various colors - white, yellow, green, etc.
Compared to other modifications, this container is not waterproof and does not have any additional devices. Its only advantage is the budget price, which allows you to throw it away without regret after the appearance of damage.
Specifications:
Index | Value |
---|---|
Manufacturer | LLC "StayNou" Russian Federation |
Colour | white |
Overall dimensions (w * d * d) | 7.8cm * 8.3cm * 4.5cm |
The presence of a mesh insert | not |
The presence of a mirror | not |
Ultrasonic cleaning | not |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 120 p. |
This model differs from its competitors by its ultrasonic cleaning function. The container is produced by Bradex in China. Despite the reviews of many buyers, according to which goods from China are of low quality, this model makes a positive impression.
It is made of lightweight plastic, which has increased strength characteristics - it is resistant to scratches and minor mechanical stress.
In such a case, cleaning is carried out not only with the help of a disinfectant solution, but also with the use of ultrasonic vibrations at high frequencies.
The cleaning process is simple and accessible to everyone: you need to pour 200 ml of water into a container, put 1 tablet and immerse the dental structure in it, after which you should turn on the device for 10-15 minutes. After this time, we get a cleaned prosthesis. The solution water can be reused up to 5 times. Since ultrasonic waves can reach the most inaccessible places for the brush, cleaning is performed at a high level.
The device can be used for cleaning jewelry, where it has also proven itself on the positive side. The device does not require special maintenance - it is enough to wash it daily and change the batteries periodically.
If you are in doubt about where it is better to buy a device - in a Russian pharmacy or order on AliExpress, we recommend choosing the first option, since dubious savings of several hundred rubles are offset by the possibility of receiving a damaged or low-quality product and the absence of a manufacturer's warranty.
Specifications:
Index | Value |
---|---|
Manufacturer | Bradex, Republic of China |
Colour | White black |
Overall dimensions (w * d * d) | 8.1cm * 9.2cm * 7.7cm |
The presence of a mesh insert | not |
The presence of a mirror | not |
Ultrasonic cleaning | there is |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 700 RUB |
This ultrasonic cleaner has a wide range of applications - it is suitable not only for cleaning dental structures, but also for washing, polishing jewelry, surgical instruments, containers and ampoules, and beauty devices.
Compared to regular rinsing, the bath has the following advantages:
The device is powered by an outlet and consumes only 35 watts. Ultrasonic processing takes place at a frequency of 40 kHz. The device works for 3 minutes and then turns off automatically. There is a built-in timer that allows you to set any operating time of the device. The capacity of the container is 600 ml, thanks to which there are no questions with the placement of the structure. Product weight is only 890g.
For cleaning, a mild mode is used, in which the products to be cleaned are not damaged. Even the dirtiest items are completely cleaned within 10 minutes. The principle of operation is based on the fact that in the process of ultrasonic vibrations a large number of bubbles are formed in the liquid, which, “hitting” the prosthesis, clean it of contamination.
Some buyers are confused by how much a bath costs, but when buying, it should be borne in mind that this is a professional-level device that produces high-quality and quick cleaning without the use of aggressive detergents, so such a purchase will pay off in a short time.
Specifications:
Index | Value |
---|---|
Manufacturer | GT Sonic, Republic of China |
Colour | white, black (blue) |
Overall dimensions (w * d * d) | 14cm * 20cm * 12.5cm |
The presence of a mesh insert | there is |
The presence of a mirror | not |
Ultrasonic cleaning | there is |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 2 300 RUB |
This German-made bath is also popular with customers. If you are in doubt about which container for dentures is better to buy, we recommend that you pay attention to this instance. With its compact size, it is equipped with a capacious container that can accommodate not only artificial teeth, but also some other items - coins, jewelry, razor detachable parts, etc.
A convenient countdown timer can be set to the following times: 1:30, 3:00, 4:30, 6:00, 7:30. As a rule, one session of 3-4 minutes is sufficient to clean removable dentures. Cleaning does not have to be done daily, you can do it once every few days. The tray has a non-removable stainless steel container; the kit includes a plastic separator that allows you to remove the items to be cleaned without touching them with your hands.
The device is delivered in a branded box, the kit includes an instruction with an overview of the main features of the device and a power cord. The lid closes without clamps and locks, the fit is not too tight, so the device is not suitable for transporting artificial teeth.
Specifications:
Index | Value |
---|---|
Manufacturer | Beurer, Germany |
Colour | white, steel |
Overall dimensions (w * d * d) | 19.5cm * 20.9cm * 12.8cm |
The presence of a mesh insert | there is |
The presence of a mirror | not |
Ultrasonic cleaning | there is |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 4,000 RUB |
Another representative of universal ultrasonic baths, which are also suitable for cleaning artificial teeth. When choosing a container for dentures of which company is better, many are guided by the price, and this particular model will interest them.Despite the fact that the product is made in China, the workmanship is at a good level and corresponds to the declared price.
The device has a capacity of 750ml, with a capacity of 150 * 130 * 50mm. The device provides electronic control, there are 5 modes of operation. The power of the device is 50 W. The container of the device is covered with transparent glass, so that you can observe its operation during the cleaning process. There is a removable plastic separator that allows you to get the cleaned items without touching them.
Since the gadget can also be used to clean other items, including cutlery, jewelry, watches, the package includes special plastic modules for their convenient placement in the container.
Specifications:
Index | Value |
---|---|
Manufacturer | Jeken, Republic of China |
Colour | White blue |
Overall dimensions (w * d * d) | 17cm * 21cm * 14.5cm |
The presence of a mesh insert | there is |
The presence of a mirror | not |
Ultrasonic cleaning | there is |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 2 900 RUB |
The ultrasonic cleaner has a large capacity (liquid volume up to 750 ml) and has 5 pre-programmed cleaning programs. The lid of the device fits snugly against the body, which reduces noise and prevents liquid spills. The device has a degassing function, which makes the cleaning process more efficient compared to similar models.
The bath is quite large, the external dimensions are 221 × 165 × 150 mm. Product weight without water - 0.97 kg. The tank is made of stainless steel, so it is not susceptible to rusting and mechanical damage.
In addition to dentures, the device can sterilize manicure and hairdressing tools, cutlery and much more. The scope of delivery includes a mesh separator, and devices for cleaning non-standard items - watches, CDs, etc.
Specifications:
Index | Value |
---|---|
Manufacturer | Lidan, Republic of China |
Colour | white, orange, steel |
Overall dimensions (w * d * d) | 16.5cm * 22.1cm * 15cm |
The presence of a mesh insert | there is |
The presence of a mirror | not |
Ultrasonic cleaning | there is |
Backlight presence | not |
Compartment for storing hygiene items | not |
average price | 2 720 p. |
The Chinese counterpart of the Miradent case, which outwardly practically does not differ from the original. Equipped with a mirror and compartment for storing hygiene items, as well as a lock. Unlike the original, it has no protrusion in the compartment for storing removable teeth.
It is made of medical plastic approved for use in dentistry. The delivery set includes a plastic brush, which consists of two heads with bristles of different hardness. According to customer reviews, the brush is not the most successful due to its increased rigidity, it does not effectively clean the denture.
Specifications:
Index | Value |
---|---|
Manufacturer | HAICAR, Republic of China |
Colour | white, blue |
Overall dimensions (w * d * d) | 9cm * 12cm * 4cm |
The presence of a mesh insert | not |
The presence of a mirror | there is |
Ultrasonic cleaning | not |
Backlight presence | not |
Compartment for storing hygiene items | there is |
average price | 500 p. |
Before buying a case for removable teeth, you should study what they are, and how they differ from each other. When choosing, you should not be guided by the price, since the purchased device is intended to serve for a long period of time, and must be of high quality.
Experts recommend paying attention to the presence of additional devices that will be convenient for the user. If you intend to carry the case with you often, you should consider models equipped with a mirror, lighting. The ultrasonic cleaning function is also convenient. Well, if the gadget runs on batteries, then you can take it with you. Unfortunately, the power of such devices is not very high, therefore, if the cleaning of prostheses is supposed to be done at home, it is better to pay attention to the devices that operate from the mains.
An important selection criterion is also the tightness of the case, since the leakage of the disinfectant liquid can create additional inconveniences, and the ingress of dirt from the outside can lead to inflammation of the oral cavity. We hope our article will help you make the right choice and buy a container that will last for many years.