Rating of the best water coolers for 2024

A nearby source with clean drinking water is necessary wherever people are. It is especially convenient when in the cold season the water can be heated easily and without additional effort, and in the hot season it can be quickly cooled without using the refrigerator. For such needs, a cooler is needed.

Coolers are convenient devices designed for cooling, heating and dispensing bottled or purified tap water prepared for drinking. The convenient design of the device and its dispenser allows you to pour and take water with comfort and without the likelihood of spilling liquid. To install the cooler, you only need bottled water and a regular outlet, which allows you to place the device in any desired place where there is access to the electrical network. Due to its ease of use and installation, the dispenser is suitable both for home use and for placement in public places, including schools and kindergartens. How to choose the best water cooler, we will figure it out below.

What can a cooler do? Main functions

The unit has three main tasks: heating, cooling and accurate pouring of liquid with a dispenser.

Heating. The dispenser is equipped with special sensors that allow you to regulate the temperature and maintain its level in the desired range, usually from +86 degrees to + 95. Water does not boil - this is done in order to preserve its beneficial natural properties. It is worth noting that this water temperature is best suited for brewing tea - the leaves will not only retain their healing powers, but release less caffeine than when brewing with boiling water. Some models of coolers are equipped with hot faucet protection, this function is called "child protection", but thanks to it, you can not be afraid of accidental burns, both for children and adults.

Cooling. This function is especially useful in hot weather and there is no refrigerator in the room. The cooler cools the water and maintains it at a given temperature, while the water temperature range is from +5 degrees to +15. Compressor technology and electronic (thermoelectric) technology are used for cooling.

• The compressor type uses freon, this type of dispenser is convenient for establishments where it is planned to consume large quantities of liquid. Devices of this type are expensive.
• Coolers with a lower cost are equipped with an electronic (thermoelectric) cooling system, moreover, such a design has less weight compared to the compressor type. Such a device is good for installation in places where there is little traffic and the number of people consuming water does not exceed five, that is, for home or office.

Pouring. Dispensers are used to pour hot and cold water, but some coolers are equipped with an additional, third dispenser for pouring liquid at room temperature. This saves dispenser resources and reduces energy costs. This type of dispenser, with three dispensers, is the most popular at home.

What are coolers?

Floor. This is a classic design, divided into top and bottom loading models. The former are more practical in use, often equipped with additional functions - a built-in refrigerator, lockers and other options. Devices with a bottom installation of a bottle do not take up much space, have a pleasant design, and loading a bottle with water is simple - women can easily cope with this task.

The floor-standing cooler works from a regular 220V outlet; to install it, you need a flat floor. The device is equipped with a display that shows information about the current mode (hot or cold water supply).

Desktop. In terms of functionality and characteristics, it is not inferior to a floor-standing cooler, has a low height and has no additional options. The design has a reservoir with a volume of 18-30 liters. Due to its small size and weight, the desktop version is compact and mobile. Its cost is lower than that of floor-standing models. You can install such a device only on a solid surface - the device has significant weight.

Flowing. The design of such a device does not require loading a bottle of water; the device uses ordinary tap water. This type of cooler is equipped with a household water filter, installed under the kitchen sink... Some models of flow-through dispensers are equipped with UV lamps for even more reliable cleaning of liquids from harmful bacteria.

Additional functions:

1. Aeration is an option for obtaining carbonated water. A cooler with this function is equipped with a special device (saturator or carbonizer) that saturates the water with carbon dioxide. The dispenser requires a disposable or reusable (rechargeable) carbon dioxide cylinder. Refillable cylinders are more difficult to operate, as they require regular refueling, which can only be done in a suitably equipped place. A medium-sized disposable bottle can make at least 60 liters of soda, and a large 5 liter bottle can hold approximately 200 liters of soda.
2. Refrigerator. The built-in refrigerator can be used as a minibar, where you can store not only drinks, but also food. The volume of the refrigerator is usually 10-20 liters (sometimes 60 liters), and there are one or two shelves inside. The capacity of such a mini-refrigerator is enough to store food for several days.
3. Storage locker. Usually they are equipped with floor coolers, the cabinet is located at the bottom of the apparatus and is used to store cutlery, as well as durable products (sugar, coffee, tea, and others). The volume of such a cabinet is usually 10-20 liters, there is one shelf inside.

Review of the best outdoor coolers

Aqua Work 16-LD / EN

Main characteristics:

• Cooling type - electronic system;
• Bottle loading - top;
• Functionality - cooling, heating;
• Heating power - 700 W;
• Cooling power - 70 W;
• Dimensions - height 96 cm, depth 31 cm, width 31 cm;
• Weight - 6.2 kg.

Average cost - 5,250 rubles.

A classic cooler, distinguished not only by a pleasant design in a strict office style, but also by good quality. Equipped with an electronic cooling system that allows cooling 1 liter of water in one hour. During the same time, it can heat up to 7 liters.

On the back of the case there is a toggle switch that allows you to turn off the heating or cooling mode if necessary.On the front of the device there are light indicators signaling the operating mode of the cooler: the first LED indicates the supply of chilled water, the second indicates the supply of hot liquid, the third indicates that the unit is connected to the network and ready for operation.

Since the body of the structure is made of steel, it is possible to use magnetic cup holders. The drip tray is easy to detach and clean.

• beautiful appearance;
• suitable for home and office;
• adjustable legs;
• compact, neat;
• nice value.

• poor cooling;
• poorly releases air into the bottle.

Vatten L47WE / L47NE

Main characteristics:

• Cooling type - electronic system;
• Bottle loading - bottom;
• Functionality - cooling, heating;
• Heating power - 800 W;
• Cooling power - 75 W;
• Dimensions - height 105 cm, depth 35 cm, width 31 cm.

Additional functions:

• Protection from children;
• Hot, cold and room temperature water supply.

The average cost is 9,215 rubles.

Thanks to the bottom loading of the bottle, the device not only allows you to replace it without much effort, but also looks good. As with the classic models, the toggle switches for the heating and cooling functions are located on the back of the device. On the external panel there is a LED indicator for operating modes.

The hot water button is protected against accidental pressing, so the cooler can be used by children. Another feature of this model is its ability to work properly at high ambient temperatures (up to +60 degrees), so this model is suitable for those who live in hot climates.

• stylish design;
• silent work;
• rapid cooling and heating;
• affordable cost;
• the presence of a small storage cabinet.

• not found.

VATTEN V45QKB

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - cooling, heating;
• Heating power - 650 W;
• Cooling power - 120 W;
• Dimensions - height 98 cm, depth 34 cm, width 31 cm.

Additional functions:

• Built-in refrigerator;
• Protection from children;
• Hot, cold and room temperature water supply.

Average cost - 10,779 rubles.

Floor-standing cooler with built-in compressor-type refrigerator. In one hour, the device is able to heat 6 liters and cool 2 liters of water. Equipped with three dispensers for supplying hot, cold and water at room temperature, while the hot tap has a childproof lock. Feeding occurs when a button is pressed.

The front panel is equipped with indicator lights. A compact and powerful refrigerator with a volume of 20 liters is located at the bottom of the device. There is a shelf inside it, the height of which can be adjusted. This model is well suited for the office, allowing you to store food in the refrigerator.

• convenient buttons;
• tanks are made of stainless steel;
• economical power consumption;
• convenient location of the refrigerating chamber.

• lack of handles on the refrigerator door.

Ecotronic H1-L

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 500 W;
• Cooling power - 90 W;
• Dimensions - height 95 cm, depth 31 cm, width 32 cm;
• Weight - 13 kg.

Additional functions:

• Leakage protection.

Average cost - 11,500 rubles.

Floor-standing unit for two cranes with top bottle loading and compressor cooling. The design of the device is classic.

Within an hour, the device cools water up to 3 liters and heats up 9 liters. Type of supply "pressing with a mug" - on a tap equipped with a rear valve, it is necessary to press with a mug so that the liquid is supplied.

Tanks for cold and hot water have a volume of 4 and 1.2 liters, while the cold water tank is collapsible, and the hot water tank is seamless, made of stainless steel.Construction details are made of high quality materials, which guarantees efficient operation and long service life.

• high speed of heating and cooling;
• economical energy consumption;
• leakage protection function;
• affordable cost.

• lack of temperature control buttons;
• lack of child protection function;
• the lower part of the structure is not involved (no locker).

Aqua Work R33-B

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 420 W;
• Cooling power - 100 W;
• Dimensions - height 102 cm, depth 33 cm, width 31 cm;
• Weight - 15 kg.

Additional functions:

• Built-in refrigerator;
• Protection from children.

The average cost is 12,000 rubles.

This model combines a cooler and a refrigerator located at the bottom of the device and equipped with two shelves. The refrigerator compartment volume is 20 liters.

The model is ideal for the office. The compressor system allows heating 5 liters of liquid (up to +90 degrees) in 1 hour, and cooling 2 liters (up to +10 degrees). Dispensing is carried out by pressing and holding the button, there are three of them on the control panel - for dispensing hot water, cold and slightly chilled. The hot water dispensers are equipped with a childproof lock.

• high quality materials of construction;
• acceptable cost;
• wide functionality;
• beautiful design performance;
• the presence of a built-in refrigerator.

• loud operation of the device;
• there is no possibility of temperature regulation.

HotFrost 350ANET

Main characteristics

• Cooling type - electronic;
• Bottle loading - bottom;
• Functionality - heating, cooling;
• Heating power - 1100 W;
• Cooling power - 75 W;
• Dimensions - height 114 cm, depth 36 cm, width 35.9 cm;
• Weight - 12.7 kg.

Additional functions

• Protection from children;
• Kettle included.

The average cost is 23,500 rubles.

The model of a multifunctional dispenser with a two-tone body is a strict combination of black and silver, and a sophisticated version of champagne and gold. The installed bottle does not spoil such a presentable appearance, as it is placed in the lower part of the device and is additionally closed with a special door. This solution has not only aesthetic value, but also allows you to protect water from the effects of light and preserve its beneficial properties. The water dispenser compartment is also equipped with a transparent door. The set comes with a kettle with a thermopot function, with a volume of 1 liter.

On the front of the building there is a touch control panel and light indicators of temperature conditions. Thanks to the electronic cooling system, the cooler runs almost silently. In one hour, the device can cool up to 0.6 liters of water (up to 90 degrees) and heat 8 liters (up to 10-15 degrees).

• the presence of a removable tray for collecting drops;
• very easy to use;
• touch control;
• the ability to close the bottle;
• silent work.

• high power consumption;
• lack of the ability to regulate the temperature of the liquid.

Review of the best desktop coolers

HotFrost D1150R

Main characteristics:

• Cooling type - no cooling function;
• Bottle loading - top;
• Functionality - without heating, drinking water supply;
• Dimensions - height 36.5 cm, depth 33 cm, width 33 cm;
• Weight - 1.65 kg.

Average cost - 1,600 rubles.

A portable device designed not for heating and cooling, but for supplying drinking water at room temperature. In this regard, this model of a desktop cooler does not depend on the electrical network, therefore it is well suited for installation in a place far from the outlet.

Also, this model is suitable for use in temporary accommodation, for example, during a country vacation. In addition, the model has a small weight, modest size and therefore the dispenser is convenient to take it on trips and travels.

The tank is made of stainless steel to preserve water quality and extend the life of the device. The bottom of the device is equipped with rubber feet, so the device is non-slip and stable on any surfaces.

• does not depend on the power supply;
• ease of use.

• the feed button is tight;
• water can only be poured into a glass.

Aqua Work 36-TDN-ST

Main characteristics:

• Cooling type - electronic;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 700W;
• Cooling power - 70W;
• Dimensions - height 43.5 cm, depth 29 cm, width 31 cm;
• Weight - 3.4 kg.

Average cost - 4 650 rubles.

Tabletop dispenser model with an electronic cooling system and a "turbo heating" function that allows you to quickly heat water. This option is activated using a digital touchscreen display, which also houses water temperature indicator lights. The body of the structure is made of plastic, so the device is compact and lightweight. Feeding occurs when the mug is pressed on the dispenser lever.

In normal mode, in one hour, the device heats up to 7 liters of water (up to 90 degrees), and cools 1 liter (up to 12 degrees). With such indicators, the cooler consumes a large amount of electricity, due to which it cannot be called economical, but its power can be adjusted using the "eco" mode.

• structural reliability;
• energy saving option "eco";
• function of fast heating of liquid;
• portability;
• light weight;
• convenient display and touch control;
• lighting above the dispensers;
• fast speed of work.

• high power consumption;
• slow cooling;
• humble design.

HotFrost D65EN

Main characteristics:

• Cooling type - electronic cooling;
• Bottle loading - top;
• Functionality - heating and cooling;
• Heating power - 420W;
• Cooling power - 80W;
• Dimensions - height 41.1 cm, depth 30 cm, width 27.3 cm;
• Weight - 4 kg.

Additional functions:

• Protection from children.

The average cost is 4,900 rubles.

A compact model of a dispenser with an elegant elegant design made in black. In one hour, the dispenser heats up 4 liters of liquid (up to 90 degrees) and cools 0.6 liters (up to 10 degrees). The device is equipped with two dispensers for supplying cold and hot water; a tap for pouring water at room temperature is not provided for by the design of the dispenser.

The model has a relatively low weight, without an installed bottle, the dispenser can be easily moved to another place. Removable drip tray is easy to clean and wash.

• beautiful appearance;
• convenient dispensers for liquid supply;
• economical energy consumption;
• child protection function.

• performance;
• short power cord.

Ecotronic H1-T

Main characteristics:

• Cooling type - compressor cooling;
• Bottle loading - top;
• Functionality - heating, cooling;
• Heating power - 500W;
• Cooling power - 90W;
• Dimensions - height 48.5 cm, depth 31 cm, width 34 cm;
• Weight - 12 kg.

Average cost - 11,100 rubles.

This model is a classic dispenser with a compressor cooling system and dispensing according to the principle of "pressing the cup". The model is available in three colors - black, white and gold. The front panel is equipped with indicator lights. In terms of performance, the device heats up 5 liters of water in one hour (up to 90 degrees) and cools 3 liters (up to 10 degrees) in the same time.

The compressor of this model has a high build quality and is distinguished by its quiet operation. The collapsible liquid tank is made of stainless steel, easy to maintain and clean. Parts of metering valves are also made of stainless steel, they are reliable and durable.

• leakage protection function;
• wide temperature range;
• ease of care for a collapsible tank;
• high performance;
• the compressor is quiet during operation.

• large weight for a tabletop model;
• lack of child protection function;
• tight tap for water supply.

AEL TC-AEL-31

Main characteristics:

• Cooling type - compressor;
• Bottle loading - top;
• Functionality - heating and cooling;
• Heating power - 550W;
• Cooling power - 110W;
• Dimensions - height 49 cm, depth 42 cm, width 31 cm;
• Weight - 13.5 kg.

Additional functions:

• Water supply at room temperature.

Average cost - 11,950 rubles.

A model of a small dispenser equipped with a powerful compressor cooling system, providing a fairly wide temperature range. The performance indicators of the cooler are 2 liters of chilled water and 5 liters of hot water per hour. The power consumption is not too high, so the dispenser shows itself as an economical device.

You can turn off the cooling and heating mode and leave the water supply at room temperature. The control panel is equipped with convenient buttons. The device is quite compact and can be installed anywhere in the office or home.

• nice classic design with control buttons;
• three dispensers for supplying hot, cold and room temperature water;
• economical power consumption;
• compact size.

• high price;
• great weight.

How to choose a cooler?

For the right choice, it is best to evaluate the device according to several main criteria:

Installation type. This is either a floor-standing option or a desktop one. The first one is suitable for office premises, they have high power, are equipped with additional functions, have built-in lockers, refrigerators or holders for a second bottle of water. Desktop dispensers are more compact, mobile, good for home use, virtually silent, and fit anywhere.

Cooling type. It is a traditional compressor system or a more modern electronic one. The first option usually has a low cost and high speed of work. The electronic cooling system is the safest, therefore it is often used in children's coolers and small dispensers.

Management type. Usually it is electronic or mechanical type. The mechanical type is the most reliable and low cost. Water is dispensed by pressing a button or a lever behind the dispenser. At the same time, devices with mechanical control have a small set of functions. Dispensers with electronic control have temperature indicator lights, a touch display and a number of additional functions, such as descaling, bactericidal treatment.

Bottle loading type. Upper, with the neck of the bottle down, or the bottom, with the neck up. The first option involves the application of effort to install a bottle, which has a significant weight. The second option is more convenient, especially for women, besides, this type of loading is more aesthetic - the bottle is hidden in a special cabinet and closed with a door. When choosing the type of download, you should focus on your capabilities.

Additional options. Most often it is carbonation of water, ozonation function, filtration, bactericidal treatment, the presence of lockers, refrigerators and others. Also, there are options that are responsible for safety - internal placement of heating elements, child protection function, additional protection against leaks. The more additional functions, the higher the cost of the device.

It should also be noted that for the normal operation of the cooler and high quality of drinking water, it is necessary to pay special attention to the supplier: Reputation of the company. The company must have a business permit, license and other permissive documents.

Water quality. If the liquid has been processed incorrectly, the beneficial substances contained in it disappear along with the harmful ones. As a result of such cleaning, antibiotics remain in the water.The constant use of such water leads to a decrease in the protective functions of the body.

Disinfection. The device itself also needs proper care and disinfection, which should be carried out every six months, and with intense stress - once every 2-3 months. The procedure must be carried out by the company with which the contract is concluded.

When buying a cooler, you need to seriously consider the issues of choosing the device itself and the supplier, as well as the service company that cleans the dispenser. If you provide the cooler with proper care, drinking water will always remain tasty and healthy, which will have the best effect on beauty and health.