Rating of the best brands of nail cutters for 2024

You can quickly and efficiently process the cuticle and nail plates using a manicure cutter. However, in order for the hardware processing procedure to be as safe and accurate as possible, it is necessary to choose a quality tool. An equally important role is played by the cutter attachments. They also have to meet high quality requirements. Each type of processing corresponds to different types (ball, cylinder, cone, corn and others), however, craftsmen with extensive experience can independently determine the nozzles that are suitable in size and shape, based on their extensive experience.

The experts have compiled a rating of the best tools. The devices of these brands will become irreplaceable helpers in manicure for both experienced masters and beginners.

Features of nail cutters

The device for manicure significantly speeds up the process of processing nails and cuticles, moreover, this method allows you to achieve ideal results. There is a huge number of a wide variety of manicure products on the market, which differ in different parameters - thickness, shape, quality, degree of abrasiveness. This allows the master to achieve the desired level of polishing over the entire area of ​​the nail plate.

Products can be made from different materials. The most popular among masters are:

• diamond - used to eliminate cracks, corns, hardened lateral ridges;
• ceramic cutters are most often chosen by beginners in manicure, since they are not whimsical in their work and do not make irreparable mistakes;
• with a carbide tool, they give the nail plates the desired shape, and also remove acrylic, gel polish;
• corundum is used to treat sensitive skin and side bolsters;
• pomegranates are intended for thin and delicate cuticles.

Nozzle shape

The tools for hardware manicure (pedicure) differ in shape:

• Flame - used to remove cracks and hardened lateral ridges.
• The needle - the nozzle is designed to raise the cuticle in order to clean the pterygium under it and remove the dried part. Also, craftsmen use a needle head to process the side rollers.
• The ball is an indispensable tool for removing excess skin, as well as for treating hardened hard-to-reach areas.
• Cylinder - a nozzle is needed to correct the shape and length of the nail plate.
• Rounded cylinder - aligns and polishes the surface of the nail plate.
• Corn - used to form artificial nails and to remove acrylics and gel polish.

Experienced masters have a full set of manicure tools, since for a high-quality and effective result, it is necessary to select the right attachments.Based on the feedback from nail professionals, a rating of the best brands was compiled.

Recommendations of professional craftsmen

To obtain a neat and attractive manicure, you need to choose a quality cutter. This can be done based on the recommendations of experienced craftsmen:

• First you need to decide what the cutter is for - for processing hands or feet. The material of the tool depends on this, since for each type of work certain characteristics are needed.
• An equally important point is the place of use of the nail cutter - at home or in the salon. For the salon, you need to purchase more cutters, and of high quality, since the tool will often be used.
• The product must be selected for a specific device, since the power of all milling cutters is different, starting from 1500 rpm. The wear of the nozzles depends on this indicator. At home, you can use the accessories from the kit without replacing them with new ones for a long time.
• The diameter of the nozzles is also important. Large attachments are designed to work at low tool speeds, while small attachments are designed for high speeds.
• Particular attention should be paid to the fact that some attachments may have the designation "T" - this means that the cutter is coated with a special compound to improve cutting properties.

Manicure and pedicure work requires the treatment of the nail plate, cuticle and the skin adjacent to the nail with different attachments. The use of nail cutters for other purposes can lead to such undesirable consequences as damage to the nail plate, and it is possible to spoil not only the appearance of the nail, but also cause harm to health of varying severity.

Top brands rating

The cheapest

JessNail

The brand belongs to a Chinese company that has over 15 years of experience in the nail industry. It has become one of the most demanded in the Russian market, since the products have a high level of quality, and the company is distinguished by its responsible approach to the development and production of products. The widest range of goods is presented, from corundum and sand to ceramic and diamond.

There are unique adaptations made from special mineral rocks, which no one else produces. Product reviews are mostly laudatory. Craftsmen do not see big flaws in cutters. They can perfectly suit both for training beginner manicure masters and for professionals, satisfying high demands. Only silicone products, which tend to grind off quickly and reduce the quality of processing, can cause disappointment.

• huge assortment;
• unique types of products are presented.

• insufficient quality.

TNL Professional

The Korean brand TNL Professional is rightfully at the top of the rating. His specialization is the production of a huge range of products for the nail industry - from decorative elements to professional tools. For more than a decade, this company has also been the world market leader in the development of nail cutters. They are made from hard alloys, due to which they retain all their properties for a long time. At the same time, prices for products are low compared to other manufacturers of high quality professional tools.

TNL Professional manufactures products of the following varieties: for various actions with the nail and cuticle - with ceramic, diamond, metal, corundum, sand and silicone heads, for the removal of dead skin and calluses on the upper and lower extremities. In the products of the TNL Professional line, you can find the necessary models for all kinds of actions.

• easy to purchase in specialized stores;
• all types of these products are produced;
• production is made from practical materials.
• low price.

• not found.

HDFreza

On this line of the rating is the brand of a domestic distributor of products from Asia and Europe. He presents cutters made of solid diamonds and sputtered, carbide, ceramic, silicone, sand, corundum. Their quality and assortment is much better than the products presented by other manufacturers: there are all kinds of heads for different needs - from 1 mm to 1 cm, from "needle" to "corn" and "barrel", which will be needed to process nails, cuticles or rough skin.

The HDFreza brand represents a range of products that is one of the widest in Europe, which is why it is so demanded by nail masters in many countries. The products are very durable and remain functional for a long time at a relatively low price; all kinds of promotions are also held. They can be purchased in retail or through the website of an official distributor that provides delivery of goods by mail or courier.

• the widest range of products is produced;
• high level of product quality;
• have universal sizes;
• low cost.

• rarely available in retail.

Magic bits

A domestic brand, quite young, appeared in 2015. Its goal is the development and production of simple and understandable products for nail care at home and in the salon. The components have been very carefully selected, especially for cutters that have successfully passed more than one test. The manufacturer focused on the assortment and quality of cutters that are manufactured in various countries - Austria, Germany, Sweden, South Korea. According to the masters, they are very comfortable to use. They do not require getting used to, they are wear-resistant, they can be operated at maximum load for several months without loss of quality in the interior. The product has markings in the form of colored notches and engraving of the brand, which is very convenient for use and is a difference from other brands.

The entire assortment of Magic Bits cutters can be roughly divided into two unequal parts - professional and personal. The latter are distinguished by heads that are safe for non-professional operations. Their range is much smaller than professional ones, but they can also be used by masters to perform simple actions with the skin, cuticles and nail plate.

• the manufacture uses modern materials that are resistant to wear;
• manufacturer's marking and engraving;
• the most complete assortment;
• low price.

• not detected.

Middle price segment

Yoko

With the help of devices, it will be possible to remove the gel coating and acrylic, process the nail surface, give the desired configuration, remove rough and rough skin. Samples of products have many different modifications, differing in the size and shape of the head.

Yoko products have a positive side of versatile ponytail and head configurations suitable for any kind of manicure machines used both at home and in the salon. Favorably withstand various types of processing and sterilization without affecting the service life of the instrument. A special point is marked by a ceramic milling cutter with good customer approval about a non-heating head during the working process.

• high quality alloys that make up the tool;
• shape and dimensions are versatile;
• use at home and in salons.

• high price.

RuNail

On the next step, the Russian brand has confidently established itself, which has earned fame abroad and in the domestic market of both the beauty industry and cosmetology. The product is used by hundreds of thousands of craftsmen and positive reviews are heard about the products due to the highest quality, durability, ease of use and a wide choice.

The line includes high carbon, diamond, mineral and garnet steel.This characteristic is due to the use of domestic materials, which are being improved to meet the needs of specialists. With the use of good raw materials, it was possible to achieve ideal head rigidity and long-term wear resistance with frequent work in beauty establishments. Having tried them once, professionals do not change the manufacturer in the future and remain faithful to the chosen brand. This indicates a high assessment of the product.

• wide range;
• wear resistant and solid heads;
• affordable price;
• sale in any shops for professional masters.

• are not observed.

Patrisa nail

Among the widespread line of this category of devices that provide cosmetic care for hands and feet, there are instruments made of ceramics and hard alloys. The package includes basic attachments for hardware nail care, for processing nails, free edges and cuticles. The quality of the product is at a high level and the nail service masters use the tools in the salons. It is possible to purchase products of the Patricia brand through online stores at a low cost.

• nice design, size and shape;
• excellent quality nozzles;
• inexpensive price.

• small assortment;
• not sold in all retail outlets.

In ‘Garden

The company, which has been operating for several decades, has a significant reserve of experience, is engaged in the production of strong and durable gel polishes, effective cosmetic products, as well as reliable manicure tools. Every year, the list of the product range is replenished. A small variety of tools are always available for sale and are manufactured in Russia, the USA and Germany, making up the middle price segment.

There are corundum, diamond, hard alloy, silicone and carbide products of the most informative values ​​and scales. With the help of a properly selected apparatus, a high-quality treatment of the skin surface and nail areas will be obtained. Accessories can be easily sterilized and chemically treated at low temperatures.

• high quality tool;
• affordable price category;
• ease of identification by shade risks.

• minimal set of variations.

Irisk Professional

Domestic developer of a brand that has been at the forefront of the beauty industry for several decades. The firm concludes contracts and cooperates with well-known enterprises in America and other foreign countries, surprising with the high level of the brand, judging by the wonderful reviews on the forums of lash and nail-masters. Cutters for manicure made from the best raw materials (corundum, blue diamond, ceramics) are noted and deserve attention.

A common color in which the products are made is pink, which delights women of fashion. The device is perfect for cutting the cuticle on coarse and hard areas of the skin, removing excess thickness from thickened nails, as well as correcting a thin plate. Reduced uptime due to frequent or erroneous use should be noted.

• a wide variety;
• pink shades;
• affordable price;
• sale in special stores.

• quick grinding of nozzles with daily use.

Barrel Ball

The recently launched American brand has managed to gain trust among avid craftsmen. Experts note a reliable manufacturer and a quality product. The company has regular customers from a narrow circle of buyers. It is not easy enough to buy products, and even quite difficult, since offers are observed mainly in online stores.

The variety of assortments is represented by multiple types of tools that exhibit incredible resistance to fast abrasion. Separately, the distinctive feature of the product is noted, which is its unusual size.Beginners will need some time to get used to the look. The products are used within the salon, but they are not very convenient for the home.

• variety and wide selection of products;
• the abrasive has long-term operation;
• low cost.

• rarely on sale.

Premium models

Strong

Saeshin is a true long-liver in the market and has been working properly for 50 years. The Strong brand came out among other models of a huge range of materials, marketing solutions, new technologies and product groups. When the company launched nail treatment machines with motor handles, its specialists immediately thought about the production of branded devices.

This product stands out among others for its versatility, as it has a standard shank that fits any nail service machine. The production uses computer control. Thanks to this, the product goes on sale in perfect condition, absolutely safe to use. They differ in compact size, ease of use and reliability. Carbide, diamond and ceramic tools and polishers are available for sale. With the help of devices with abrasive caps, you can quickly get rid of the gel polish, give the nails the desired shape, and tidy the side rollers.

• great quality;
• many varieties.

• high price.

Planet Nails

The Planet Nails brand was ranked second. The manufacturer from Germany produces the highest quality cutters. They differ in that for a very long time they delight manicure specialists with their work. However, their cost is 1.5-2 times higher than the average. In Russia, this product has been successfully sold for 2 decades, which indicates its good quality and high confidence of manicure professionals.

Under the Planet Nails brand, manicure tools are produced with a classic tip made of metal, diamond chips or ceramic. To prevent manicurists from getting confused, there are colored marks on each type of product. You can treat nails, trim cuticles and remove keratinized skin. The product is distributed through professional tool stores, but they are not always available due to high demand.

• high quality;
• a large number of types of cutters;
• easy to recognize by digital tag.

• not always available in the store;
• high price.

Mühle Maniküre

German manufacturers are valued for the high quality of their products, and the Mühle Maniküre brand is no exception. The company devotes a lot of time to the implementation of innovations: new types of abrasives for heads appear, better materials are selected, technologies are constantly being improved. Thanks to this, the company's products receive the most enthusiastic reviews from nail service specialists.

Mühle Maniküre's flagship product is sand head products. The company also produces corundum, diamond and combined models. All of them are characterized by a high degree of wear resistance, which affects the cost. On average, products from a German manufacturer are 1.5 times more expensive than budget counterparts.

• big choice;
• durability.

• high price.

In fact, it is not so difficult to choose the part for the manicure machine that is optimal in quality and price. The easiest way to make a choice is based on the selection of a manufacturer that has been on the market for several years and has positively proven itself among masters of nail service. It will not be superfluous to study the opinion of professionals.