Rating of the best airsoft masks for 2024

Airsoft, known in Russia as airsoft, is a military-tactical command entertainment using several types of weapons that do not look different from the original. Such a weapon is called electro-pneumatic, and it shoots plastic six-gauge balls, which can cause injury, despite the fact that the muzzle energy of the EPO is only 3 Joules.

The birthplace of airsoft is Japan, where it was forbidden to have weapons after the defeat in the Second World War. To train and practice self-defense skills, people have adapted to use imitation weapons and plastic balls instead of bullets. The gunpowder was replaced with compressed gas, which reduced the trauma of the training participants.

Therefore, it is important to choose the right and reliable equipment. Perhaps its most important element is a face shield. The best models will be discussed further.

The importance of equipment

Every airsoft player must have a protective mask and goggles in his equipment. They will be needed to protect the player's face from bullets. This is especially important when the match takes place indoors, at a short distance the risk of getting ammunition in the face increases significantly. Even from a distance of two meters, a shot can not only cause pain, but also cause serious injury or drive the ball under the skin.

But even if the game takes place in an open area, this does not guarantee that the participants will not get injured, therefore, protective equipment is required.

In addition to shots, the danger can be represented by dense thickets of bushes, branches, bouncing pebbles, etc.

In the production of airsoft masks, manufacturers use a wide variety of materials, for example, impact-resistant plastic. It significantly softens the blow, but it cannot absorb all the energy of the bullet. The main advantage of ABS-plastic products is convenience and low weight. In addition, such masks will protect against wind and cold weather.

Interesting! Airsoft, unlike paintball, uses non-marking ammunition. Since plastic bullets do not mark a hit, it can only be determined by feeling the blow, which means defeat and the participant's immediate withdrawal from the battle.

Criterias of choice

Having understood the importance of protective masks, it is necessary to figure out what characteristics a quality product should have.

Experienced players pay attention to the following five factors:

1. Protection area. It is logical that the more the head and face are covered, the less chance of injury.
2. Convenience of the model. Before buying, it is worth trying on the product, to understand if it hinders movements, does it limit audibility. Compatibility with glasses, hats, headphones and other equipment is also taken into account.
3. Design. It all depends on the player's taste preferences. Someone wants to be as similar as possible to a real special forces, while someone prefers a mask in the form of a monster, a skull, etc.
4. Price.To avoid mistakes when choosing a mask, it is better to first study the market of the offered products and find the best option in terms of price-quality ratio. Of course, you need to calculate the budget.
5. Viewing angle. The better the visibility, the better.

The double-glazed product can be a good option for both beginners and experienced players. These lenses fog up much less. It is better to choose models with clear or amber glass, as yellow enhances detail and contrast in low light conditions.

Important! Only adults are allowed to play airsoft! The fact is that during battles, participants often get injured. And it's not even about abrasions and bruises, but about real fractures and even knocked out teeth! In exceptional cases, after additional negotiations and discussions, it is allowed to play from 16 years old, with the written permission of the parents or legal representatives of the teenager.

Care Tips

You can extend the life of your protective equipment by following these simple tips:

• check the glass for cracks and scratches before each game;
• regardless of weather conditions, after each battle the seals are washed from sweat and dirt;
• glasses are wiped with a special napkin or soft cloth only.

Attention! A number of products designed to prevent fogging of glass surfaces can damage the coating. Therefore, it is recommended to buy only high-quality liquids from trusted manufacturers.

Top 10 best protective masks for airsoft

"MA-17"

10th place

Main characteristics
Country:	China
A type:	combined
Material:	soft plastic, mesh inserts
Colour:	the black
Average price:	600 RUB

This model, which received the funny nickname "Tsokotukha" for the special shape of the glasses, is quite popular among beginners. It closes the eyes and jaw, and is attached to the head with an elastic strap. The product can be divided into two parts if necessary and used separately.

Unfortunately, reviews about the mask are not very welcoming - users complain about weak plastic, which even penetrates standard EPO, the belt often breaks.

Among the positive qualities, a fairly good viewing angle stands out.

• lightweight collapsible design;
• good overview;
• democratic cost.

• fragile plastic;
• the back of the head remains unprotected;
• unreliable fasteners.

"Praetorian"

9th place

Main characteristics
Country:	China
A type:	complex
Material:	nylon, metal
Colour:	olive, black, khaki
Average price:	1 190 p.

The model, also known as the MA-12, is popular among airsoft players because it protects almost the entire head. Moreover, it is not expensive.

The mesh visor, made of metal, does not restrict the view, allows air to pass through well, and prevents fogging.

The mask reliably protects the cheeks, back of the head, ears and forehead thanks to the dense and durable fabric overlays. Wearing safety glasses with it is advisable but not required.

A good option for a beginner.

• protection of the entire head;
• durable materials of manufacture;
• breathability;
• affordable price.

• not an entourage design.

"Gas mask MO-4"

8th place

Main characteristics
Country:	China
A type:	complex
Material:	impact-resistant plastic, polycarbonate
Colour:	olive, black
Average price:	1 650 RUB

This rather interesting option will appeal to fans of the S.T.A.L.K.E.R. universe. and post-apocalyptic motives. The product is made in the form of a gas mask and will protect the player's face from chin to forehead. Transparent lenses made of durable polycarbonate reliably protect your eyes from fragments and bullets.

On the left, a simulated filter is provided, in which a mini-fan powered by batteries is hidden. Thanks to it, additional air circulation is provided, the risk of fogging is significantly reduced.

• durable materials of manufacture;
• additional ventilation;
• styling under an army gas mask;
• average price.

• does not protect the back of the head;
• in some situations, the angle of view is limited.

"MA-10"

7th place

Main characteristics
Country:	China
A type:	on the lower jaw, combined
Material:	metal mesh, cordura
Colour:	olive
Average price:	900 p.

This model is good because it is endowed with additional protection for the ears and throat. In general, the mask protects the face from the bridge of the nose to the chin.

As standard, the product consists of two parts: the upper part is made of mesh, and the lower part is made of dense Cordura with a foam rubber pad, which provides additional wearing comfort.

The mask allows air to pass through well, does not restrict movement, almost does not restrict visibility and audibility.

Combines well with goggles and hard hat. Since the top of the head and the back of the head are not protected, additional equipment is indispensable.

• high-quality materials of manufacture;
• reliable protection;
• additional ear pads;
• budget price.

• the need to buy additional glasses and a helmet;
• The walkie-talkie can only be connected via a micro-earphone.

"PYRAMEX CAPSTONE SHIELD"

6th place

Main characteristics
Country:	Taiwan
A type:	combined
Material:	impact-resistant plastic, polycarbonate
Colour:	silver
Average price:	3290 RUB

This model is popular with experienced airsoft fighters. The lenses, made of impact-resistant polycarbonate, have anti-splinter properties, transmit 96% of the light without distortion. Thanks to a special coating, the glass is protected from scratches and fogging.

Anatomical frame does not restrict movement, is equipped with a four-channel ventilation system and is edged with a silicone insert.

• complete protection of the face;
• heavy-duty anti-splinter lenses;
• collapsible design;
• adjustable fixation strap with a lock.

• no temples for the nose pad;
• quite high price.

"MA-92-OD WoSporT"

5th place

Main characteristics
Country:	China
A type:	on the jaw
Material:	nylon, metal mesh
Colour:	olive
Average price:	950 RUB

The compact and lightweight model protects the jaw and ears. If you harmoniously choose a helmet and glasses, it looks very impressive.

The main material of production is durable nylon with soft inner lining. Metal mesh inserts in the mouth, nose and ears do not impede the penetration of air, do not distort the voice and do not limit hearing, which is very important in airsoft battles.

The model is fixed on the head with a double adjustable strap.

• good breathability;
• durable materials of manufacture;
• additional protection for the ears;
• affordable price.

• it is necessary to buy equipment.

"Battleaxe"

4th place

Main characteristics
Country:	China
A type:	combined
Material:	nylon, metal mesh
Colour:	the black
Average price:	1 250 RUB

This tactical model consists of goggles with shockproof lenses and a plastic mask that can be removed if necessary.

The product is equipped with a fan powered by AAA batteries. This provides additional air circulation and prevents fogging.

The inner part has soft inserts for a more comfortable wearing.

The equipment is attached to the head with elastic adjustable straps.

• high-quality materials of manufacture;
• softening seals;
• full face protection;
• budget cost.

• the back of the head is not protected.

Interesting! It is generally accepted that airsoft is an exclusively male hobby. However, this is not quite true. The fair sex is also not averse to running around with weapons and testing themselves for strength.

"M06 Skeletons AS-MS0058SK"

3rd place

Main characteristics
Country:	China
A type:	complex
Material:	plastic, metal mesh
Colour:	black, black and white, olive, etc.
Average price:	1 150 RUB

The third place goes to a specimen of Chinese origin, made of soft but durable plastic with a perforated mesh around the eyes.

This mask completely covers the face, including the top of the head and ears.

The equipment is secured with removable elastic straps that can be adjusted to a specific size.

There are small openings in the area of ​​the mouth and cheeks that allow air to pass through well.

Users claim that the M06 provides reliable face protection against bullets and shrapnel.

• spectacular appearance;
• quality materials;
• reliable protection of the entire face;
• affordable price.

• no protection for the back of the head;
• the mask covers the ears somewhat, which can affect hearing during the battle.

Attention! There are many cheap airsoft gear available on AliExpress, but much cheaper. For example, in the Shenzhen Moonlight Houseware store, the M06 Skeletons mask is available in the most incredible colors and costs only 675 rubles. However, it is worth remembering that buying on Aliexpress is akin to a lottery: you cannot always buy high-quality products.

"Spectra"

2nd place

Main characteristics
Country:	China
A type:	complex, combined
Material:	plastic, metal mesh
Colour:	black, olive, sand
Average price:	1,000 RUB

The honorable second place is taken by a protective mask with a visor and visor from STTI, which provides full protection for the face and neck. Moreover, all elements are removable, and, if necessary, they can be used separately.

Fixation on the head is done with plastic rivets and straps.

The visor will protect from the blinding sun, the visor from the gusty wind, and the mesh in the eye area will protect against fogging.

The manufacturer has provided for a good ventilation system, with good air permeability.

For added comfort, there are foam inserts inside that eliminate chafing.

• multifunctionality;
• reliable protection;
• spectacular design;
• affordable cost.

• not the highest quality material of manufacture;
• In some positions restricts movement.

MA-19

1 place

Main characteristics
Country:	China
A type:	complex
Material:	nylon, metal mesh
Colour:	black, olive, khaki, etc.
Average price:	1 750 RUB

The leader of today's rating is a copy that guarantees full head protection.

Thanks to the wide reticle visor providing a good view, glasses are not needed. In the area of ​​the ears there is also a mesh that does not drown out external sounds and freely lets air through.

The dense protective fabric covering the entire head of the player holds back the impact, so it is not necessary to purchase a helmet.

The mask also has Velcro panels on which you can attach a signal beacon or a team patch

• full head protection;
• high-quality materials of manufacture;
• many positive reviews;
• no need to buy equipment;
• affordable cost.

• not found.

Interesting! Some players, wanting to have unique uniforms and having good imagination, purchase a standard mask, for example, in the form of a zombie or a skull, and paint it at their discretion. It turns out spectacularly and sometimes frightening!

Attention! The article is for informational purposes only. In order to avoid mistakes when choosing, before buying, it is worth checking the characteristics and prices with a consultant in the store or by phone with a customer support operator.