Rating of the best soldering dryers for 2024

Working with microcircuits and various boards requires accuracy and precision. If earlier radio amateurs used a conventional soldering iron, which had a copper tip, now the microcircuits have become much smaller, and such a device is not suitable for work. Therefore, a soldering hair dryer became its replacement. In addition to working with microcircuits, it can be used to dry various compounds, and even to work with car bumpers. But still, it is mostly used by craftsmen who repair cell phones and computers.

What is a soldering dryer

This appliance can heat up metal bends. The desired heating temperature is reached in a short time. But a hair dryer is rarely used separately, usually it is used together with a soldering station. With such a device, it is easy to soften both plastic and tin or thin metal.

The operation of a hair dryer is quite simple and straightforward, so both a beginner and a master of their craft can use such a device. After the device is turned on, the heating element will start working, and with it the fan. This will bring hot air to the workplace. Since the temperature will be high enough, the processed object will begin to melt, at this moment you should connect or disconnect the required part or element.

The temperature generated by the device can reach 800 degrees. Moreover, it can be adjusted. There is a relay for this. But besides this, this indicator will depend on the fan, as well as the distance from the hair dryer to the heated part.

If we talk about the design of such a soldering device, then it has a handle, a housing, a heating element, a fan and nozzles. The handle and body are made of a material that can withstand high temperatures. Usually, ceramics, ebonite or porcelain are used for this, and in order to reduce the temperature, the handle can be wrapped with a special heat-resistant cloth. Nichrome wire serves as a heating element. It has a small radius and does not deform under the influence of high temperature. On the back of the device there is a small fan, it will supply air to the nichrome wire. The nozzles are steel tubes with a small diameter.

How to make a soldering hairdryer with your own hands

If you do not want to buy such equipment, then you can make it yourself from an ordinary soldering iron. To do this, remove the tip from the soldering iron by unscrewing two screws. Now a steel tube nozzle is installed in its place. If the diameter of the tube is slightly smaller, then the empty space can be filled with foil. Also in this case, the foil will create tightness. Then it is necessary to remove the handle of the soldering iron and install the air tube inside.When the tube is in place, the handle is replaced. Since ordinary soldering irons have ventilation holes that protect the device from overheating, they will not be needed here. After all, the air will go out through the nozzle anyway. These holes should be closed to create a tight seal. You can also close them with foil. The soldering iron is almost ready to work, you just need to connect the pump.

There is also another way to create a hot air gun. To do this, first a heating element is created from a wire with a cross section of 4-7 mm, a nichrome spiral will be wound on it. The nichrome spiral should have a cross section of about 0.5 mm. When winding, the turns should not touch, as well as be the same. Now the fiberglass layer is fixed with hot melt glue. A tube made of heat-resistant material is installed on the adhesive layer. After that, the ends, as well as the places where the spirals will be removed, should also be covered with a layer of glue. The outlet of the spirals is connected to the wire, which must be insulated. To be able to control the voltage, the wire must pass through a switch and a rheostat. Also remember to install the air supply part. You can take a cooler from your computer as a fan. The nozzle can now be attached and the instrument is ready for use.

Criterias of choice

So that the purchase does not bring disappointment and meet all the expectations of the buyer, you should pay attention to certain criteria.

Since work may be carried out with different materials that do not have the same melting point, a model with a wide range of operating temperatures should be chosen. For the device to be ideal, its minimum heating temperature should be about 50 degrees, and the maximum - about 500. Low temperatures will be useful for working with fragile materials, and high temperatures will show themselves when it is necessary to solder transistors with thick legs. If the minimum heating temperature is considered too high for a certain material, then this is not a problem. It can be corrected by adjusting the distance from the part to the nozzle of the hair dryer, as well as using a wire.

Also, do not forget about the power of the device. This parameter will affect the heating rate and, consequently, the time spent on work. Typically, power ranges from 40 to 750 watts. If a hairdryer is needed from time to time, then models with low power ratings are suitable. For craftsmen who use the device constantly, it is better to choose devices with a power of at least 200 watts.

Remember to look at the type of heating element. This criterion affects the quality of the device, as well as its service life and safety. The most inexpensive models use nichrome wire as a heating element, products have a slightly more expensive ceramic coating on the rod, and the most expensive ones are induction models, here heat appears due to electromagnetic coils that are inside the handle.

The performance of the device will depend on the exit of the air flow through the nozzle. Because the blow dryer has a small fan that can deliver 20 to 120 liters of air per minute. Then when buying, pay attention to this technical characteristic. But if this is not enough for you, then you should pay attention to the models with a compressor, which is located in the control unit. To better monitor the current state of the device, the device must have a digital display. This will allow the foreman to observe the temperature, which will greatly facilitate the work process.

Also, for more comfortable work, some manufacturers complete the devices with several attachments. These attachments can differ in both shape and size. The more attachments there are, the more work can be done.

Best inexpensive soldering hair dryers

Element 8032

This hair dryer is suitable for working with various components. It heats up quickly, has a compact size. And also the manufacturer installed a display here so that you can control the heating temperature.With "Element 8032" it is possible to work autonomously, as well as easy to transport. This model has 99 airflow modes. The minimum heating temperature is 100 degrees and the maximum temperature is 480.

During operation, "Element 8032" does not emit a lot of noise that interferes with operation. It should be noted that this model has air blowing, which will remain after the device is turned off. This feature will extend the service life. The heating element has an additional wire that heats up during operation. This will make it possible to increase heating at the same power, which will shorten the operating time. When the master holds the "Element 8032" in his hand, the device will be in working order, and the transition to standby mode will be carried out when the hair dryer falls on the holder.

The Element 8032 has a power of 650 W. The overall dimensions are 12.4 * 18 * 7 * 24.9 cm, and the weight is 880 grams. The cord is 1.37 m long.

The average cost is 3700 rubles.

• Heats up in 5 seconds;
• Small size;
• Doesn't make much noise;
• Convenient operation;
• High quality heating element.

• Not found.

Element 902D

This model is a soldering station. There is a digital indicator that monitors the temperature. The two-channel equipment of the device consists of a power supply unit and a soldering iron, which has a hair dryer and various nozzles.

The manufacturer guarantees that the device will be ready for use in 5-7 seconds after switching on. The minimum heating temperature is 200 degrees, and the maximum reaches 450 degrees. The maximum airflow volume of the hair dryer can reach 120 liters per minute. The set includes three nozzles for the hair dryer, which differ in their size. If the temperature is 70 degrees or below, the device will automatically stop.

The Element 902D has a power of 700 watts. The size of the Element 902D is 15 * 10 * 13.8 cm, and the total weight is 2.63 kg, while the unit weighs 1.55 kg.

The average cost is 4000 rubles.

• Fast heating;
• Power;
• Digital indicator;
• High quality soldering.

• There is no way to disconnect the cord from the station.

Baku BK-8032A

This model is a hot air gun, which is controlled by a microprocessor. It is suitable for dismantling and mounting electronic elements, for installing heat-shrinkable tubes, as well as soldering plastic parts and much more.

"Baku BK-8032A" has a digital indication of temperature, as well as the display will show the volume of air flow. With the help of an electronic system, you can control heating, change the air flow. But at the same time, the manufacturer has installed a function that allows you to return to the original data. The heating element has the shape of a spiral, and the air blower in this model is of the turbine type. Baku BK-8032A operates in the temperature range from 100 to 480 degrees. The productivity of the device is 30 liters of air per minute. The set includes two nozzles with a diameter of 8 and 10 mm.

The power of "Baku BK-8032A" is 450 W. The device is 27.7 cm long and 7.7 mm in diameter. In this case, the weight of the device is 1 kg.

The average cost is 800 rubles.

• Compact size;
• The set includes two nozzles;
• Digital indication;
• Control of the device operation using a microprocessor.

• The handle heats up quickly.

Bison Professional 55350

This soldering station is made of quality materials in compliance with all modern technologies. With the help of "Zubr Professional 55350" you can make high-quality soldering, as well as dismantle parts of microcircuits.

Here the manufacturer installed a ceramic heating element. Due to the high power of the device, instant heating takes place, and there is also an accurate heating control in steps of one degree. The air flow can also be regulated, its maximum value is 120 liters per minute. When "Zubr Professional 55350" is placed on the stand, the device will automatically go into sleep mode, which can significantly save power consumption and extend the service life of the soldering iron.It should be noted that the handle has an ergonomic shape and a special base that will prevent the device from sliding in the hand.

The average cost is 4000 rubles.

• High power;
• Fast heating;
• Automatic transition to sleep mode;
• Precise temperature control;
• The maximum heating temperature is 500 degrees.

• Not found.

The best professional soldering hair dryers

Hakko FM-2029

A feature of this model from the "Hakko" company is a thin handle. With its help, you can solder or dismantle elements in hard-to-reach places. Also, for ease of use, the manufacturer installed a power button on the handle of the soldering iron, so it is much more convenient to control the supply of hot air during operation.

"Hakko FM-2029" operates in a temperature range from 100 to 550 degrees. This model has a composite heating element. In addition, in the kit with the device, you can find a stand for a soldering iron, a potholder to change the tips and cable for connecting the stand.

The power of "Hakko FM-2029" is 140 W. The length of the instrument with the tip is 23.2 cm and the weight without cable is 50 grams. The cable length is 1.2 m.

The average cost is 14,000 rubles.

• Compact size;
• Convenient to work in hard-to-reach places;
• Light weight;
• High heating temperature;
• Japanese manufacturer.

• High price.

Lukey-868

With the help of this soldering station, you can solder and dismantle various components, compress flexible tubes, do plastic soldering, as well as dry and heat parts. Due to its design and compact size, the soldering iron will not take up much space on the table and will be convenient for transportation.

There is a system of sensors, as well as a microcomputer, which allow you to control the heating temperature. There are also LEDs that are controlled by a touch and rotary switch. In addition, the manufacturer has installed an antistatic function, thanks to this you can not worry about the payment in the event of an electric discharge.

The cooling system is also worth noting. After the device is turned off, air blowing will continue, this has a positive effect on the service life of the heating element, as well as the handle. In this case, the device will automatically turn off when the air temperature reaches 50 degrees. "Lukey-868" has a circular impeller, this makes it possible to create a large air flow and at the same time the device does not create much noise.

The power of "Lukey-868" is 750 W. The device operates in a temperature range of 100 to 480 degrees. The size of "Lukey-868" is 16 * 19 * 11.6 cm, and its weight is 1.5 kg.

The average cost is 8,000 rubles.

• Advanced heating element;
• There is protection against electrical discharge;
• Cooling system;
• High power;
• Possibility of setting the temperature with an accuracy of 1 degree.

• It has no significant drawbacks.

Rexant 12-0144

Such a soldering station is a universal device designed for soldering and dismantling electronic elements. The design of this model has an LCD display that allows you to monitor the operating parameters of the device. The supply of hot air can reach a volume of up to 22 liters per minute, while the temperature range can vary from 160 to 480 degrees. After switching off the "Rexant 12-0144", the cooling system is activated, which makes it possible to extend the life of the heating element.

The power of the Rexant 12-0144 is 320 W. The soldering iron weight is 3.75 kg.

The average cost is 8,000 rubles.

• Has many attachments;
• Fast heating;
• Cooling system;
• Russian manufacturer.

• Low power.

Conclusion

The models of soldering dryers presented in the rating are very popular among craftsmen. Each of the soldering irons has fast heating and compact size. This can shorten the turnaround time and increase productivity.If for someone the cost of the device seems high, you can look at the options on the Aliexpress site. Chinese models are also in demand among electronics lovers, and the price of such a soldering iron will not hit your pocket hard.