Rating of the best manufacturers of ankle boots for 2024

The name "tibia" originates from the term "tibia". This is the part of the leg that runs from the knee to the foot. A similar type of footwear began to be produced during the Second World War. The standard footwear, common in those years, did not support the ankle, so soldiers often received foot injuries. After the end of the war, the American army introduced ankle boots into its equipment.

The material used for sewing - rough leather - gives the ankle boots a brutal look. This type of footwear is high, due to which it covers almost the entire “shin” part of the leg, acting as a retainer. This helps to avoid many major injuries: from dislocations to fractures.

The thickened sole and fur lining of some models makes them suitable for winter use. And impregnation with a special composition and stitching along the diameter edge allow you to wear such shoes in slushy weather, without fear that they will get wet.

Material used in the manufacture

Ankle boots have increased strength. In their manufacture, special technologies are used that adjust the shoes to temperature conditions, kinks, dampness and slipping. In addition, the manufacturing technology is built in such a way as to adjust the boot to the foot, saving energy on long hikes.

Such characteristics are achieved by using only natural materials in the production: genuine leather, gortex or cordura, suede, nubuck. Sometimes a cotton material is used. However, no substitutes are allowed.

The nubuck cover looks like suede. when using nubuck, special processing is applied. Water resistance is achieved by spraying the material with oil-containing substances. These boots are more expensive than regular leather boots.

Chrome leather has also become one of the most popular materials because differs in strength, moisture resistance and elasticity. Although this material is inferior to natural leather in price and demand, it is no worse in quality.

The inner part can be either hollow or equipped with a lining or insulation. The lining for summer models is usually a porous polyester mesh. This helps to lower the temperature in the shoe and rid the foot of excess moisture. Winter models are lined with natural insulation, such as fur.

The outsole is made of rubber materials. The rivets and studs located on it serve as a guarantor of wear resistance and durability. It is this part of the boots that is responsible for the durability and comfort when wearing. The outsole may vary:

• Soft. Used in summer models;
• Tough. Ideal for cold periods asthe main function is to keep warm and "repel" frost.

Due to the relief, the boots are better connected to the ground. A flat base is not released. The sole makes up 70% of the total weight of the boots. It is impregnated and vulcanized, so it is not afraid of explosive substances and inflammations.

What types of ankle boots are used

Although the original purpose of the ankle boots was a military theme, now they have spread to other areas of life. Now there are models not only of the military type, but even for women and children. It is worth paying attention to the most popular types:

Military

Modern products are of much higher quality than those made in Soviet times. The leg is not pressed down due to the space that remains at the foot. There is also no friction in the toes and heels.

However, when using this type of shoe, it is worth considering some features:

• Sprains are minimized because the height of the shoe fixes the ankle in such a way that the joint is immobilized.
• Better to choose lace-up shoes, because it uses high quality elastic laces;
• The outsole is thickened, which helps to avoid unnecessary damage and moisture ingress;
• Durability is the main advantage of military boots. They may lose their presentability, but, despite this, they will serve for a very long time.

Thus, military-type ankle boots have a number of advantages.

Sports

This type looks like sneakers, and is also called "Storm". The main specialization of these shoes is an active lifestyle, which makes them suitable for tourism and hiking. It is for this reason that such ankle boots have a ribbed sole and a slightly raised toe. Also, depreciation is higher than other types. The classic lacing provides a good hold of the shoe. Its weight is small and its height is average.

Womens

Ankle boots are now common among women. Moreover, this type of footwear is often used in fashion shows and sparkles on the pages of glossy magazines. The main feature of women's ankle boots is that they are not so massive and heavy, so they go well with streetwear style.

In addition, this type of footwear has some distinctive features:

• Variety of colors and designs;
• Softer leather is used for sewing;
• Summer models are usually additionally decorated;
• The boots have a more refined shape and are more pleasant to sit on the foot.

The standard color is black. However, models of various colors are now actively being made. Budget brands use artificial insulation, so the price, respectively, is lower. Such boots are often worn under jeans and trousers, and sometimes more surprising combinations are obtained with skirts and shorts.

How to care for ankle boots

After the purchase, you should re-check that the shoes are the right size. If, nevertheless, it turned out that it squeezes the leg, then there is an opportunity to stretch the ankle boots by 1 size. To do this, you need medical alcohol, which you need to moisten the inside of the boot, and then quickly put it on your leg. Then you need to walk a little, and then remove and fill with damp newsprint. Thus, they must stand all night. Substantial changes can be noticed later.

You need to carry out a similar procedure every day before going to bed. The shoes will dry out overnight and retain their shape. Before applying the cream, shoes need to be wiped with a damp sponge. The impregnation is distributed with a special brush or a regular toothbrush is used.

Lubricate with leather cream or glycerin, which can be found in any pharmacy.

In winter, it is better to coat the army type of boots with lamb fat. It helps trap heat and minimizes cold air entering the shoe.

After a walk in slushy weather, it is better to wipe the boots with a damp sponge, followed by a dry cloth. Crumpled newspapers placed inside will help absorb excess moisture.

The vegetable oil will help give the surface of the shoe elasticity.

In order to avoid fungal diseases, it is highly recommended to treat the inner part of the tibia with vinegar at least once a month. To get rid of the unpleasant odor, you should take them out to fresh air for a couple of days.

How to choose

In order to make the right choice, you must adhere to some tips:

• It is required to immediately determine in which field of activity the ankle boots will be involved, as well as in what weather;
• For activities in mountainous areas, it is better to choose studded shoes with a high tread, in addition, the studs should be steel;
• If the shoes will be used in frosty weather, then it is better to opt for high soles with sheepskin insoles;
• In warm weather, lightweight models are perfect;
• The main specialization of chrome boots is informal meetings.

For more severe conditions, you should purchase options from well-known brands that specialize in durability.

• Proper care can significantly extend the life of any shoe. Before going outside, grease the surface with wax or shoe polish, which has a water-repellent effect.
• The boot must fit perfectly in size, not squeeze anywhere and not leave extra space, otherwise the risk of injury increases;
• Correct lacing also plays a big role. It will be best to lace up in a standard way. This will help keep the shoe in position.

This set of rules will help not only make the right choice, but also increase the service life of any model.

The best ankle boots manufacturers for 2024

Below are the most popular ankle boots manufacturers in demand by consumers in 2024.

Dave marshall

This brand represents truly military domestic products, high ankle boots. The lack of imitations and elaborate inserts immediately catches the eye. The company's products are designed only for those who know a lot about the true purpose of this type of footwear. Shoes are one of the most affordable in Russia for the price factor. Their price is on average 1,500 rubles. Various types of footwear are produced: summer, winter, demi-season, lightweight, etc.

The shoes are roomy enough inside, for this very reason they are suitable for men with an unusually wide foot that does not fit into other models. However, the variety of sizes is very small: from 40 to 46. This significantly reduces the number of clients, especially women. But sometimes you can find exceptional models from 35 to 47 sizes.

You shouldn't count on perfect quality for such a price. There are models that lose their aesthetics after several seasons of constant use, or even become unusable. But often buyers do not take ankle boots for a 10-year period. Usually the need to wear them arises only during hikes or long journeys.

• Low cost;
• Good enough quality;
• Versatile focus;
• The austerity of style.

• Lean dimensional grid;
• Only male orientation;
• Insufficiently long service life.

Faraday

Faraday is a Russian company specializing in excellent quality ankle boots and work boots. On the official website there is an opportunity to find shoes of this direction for every taste. There is also an extensive variety of seasonal boots. The variety of the size grid is especially striking: from 33 to 46 sizes. This allows you to expand your customer base even to the children's category.

Although at the moment the company is not as well-known as the others, the product is in high demand on the market. The latest technologies and the latest standards are used for manufacturing, so the shoes always remain relevant. In addition, "Faraday" is classified even by the type of sole.

It should be noted that the brand specializes in uniform ankle boots. For officers / cadets / cadets, these models will be very useful.This manufacturer creates the most practical and comfortable shoes, while meeting the individual needs of each. The Faraday firm provides an opportunity for wholesale purchase, even though the price of its products is already quite low.

• Low cost of production;
• High quality;
• Huge variety of models;
• Extensive dimensional grid;
• The possibility of a wholesale purchase.

• Brand unknown.

Garsing

Garsing is a Belarusian manufacturer of tactical equipment. All products of this company are tested in various weather conditions, including extraordinary ones. The assortment consists of products for any climatic zone. The color ranges from black to camouflage. Those. products have a specialized focus.

The brand pleases with an affordable cost and at the same time excellent quality. Leather models are especially famous. The soles are made of excellent material that can withstand temperature fluctuations from -40 to +40 degrees. Of course, almost every model has a “glass” that keeps the foot safe. Although the range of products is extensive, almost everything is designed in an army style. However, this does not affect style and comfort, so they look good in combination with everyday style.

Garsing has an extended range of sizes. Thus, the maximum size reaches 50, and the minimum - 36. Mostly buyers are satisfied with the manufacturer, but you can often find complaints about low-quality laces and insoles.

• Affordable price;
• Excellent quality;
• High quality outsole;
• Color variety.

• Army focus only;
• Bad reviews about the quality of the laces and insoles.

Magnum

Magnum differs from other brands in that it uses sports technologies in its development. But, despite this, the company specializes in goods specifically for the army and special services. This in absentia guarantees high quality and comfort of the boots. For manufacturing, advanced technologies are used for moisture protection, protection against temperature fluctuations, protection against injuries, etc. In addition, consumers note increased wearing comfort.

The assortment is huge, where not only the price but also the color changes. Thus, everyone can choose a model for themselves. Most of the models are even suitable for wearing with a formal outfit.

• Low price;
• Extensive assortment;
• High quality;
• Application of original technologies.

• Only a specialized product focus.

Steel

This brand is notable for the indestructibility of its shoes, even with daily use under the most unexpected and unbearable conditions. Basically, the products are aimed at rockers and informals living in different climatic zones, which speaks to the brand's specialization in this area. Thus, you can find not only standard military boots, but also amazing creations with many plaques and rivets.

For production, a thick sole and leather of cattle are used, so Steel products are able to withstand absolutely any test. The toes are protected by a steel glass, so they remain safe even if something very heavy falls on them.

The three-layer type of sole makes it much more durable and reliable. The inner part is made taking into account all medical requirements, which emphasizes the seller's concern for the buyer. As a result, you can see original shoes of extraordinary quality.

• Focus on the most unusual categories of buyers;
• Extraordinary high quality;
• Large line of models.

• There are mainly rocker models.

Most popular models of 2024 not included in the rating of brands

Among the total mass of ankle boots, there are models that deserve special attention, although the manufacturers themselves do not directly specialize in such shoes. It:

1. Butex Cobra М12100;
2. BIZON (BIZON) Duck U-12;
3. Tropic М016;
4. Ralf Ringer Weekend HUNTER;
5. Omon M905.

Each model presented combines the best qualities and is durable when worn.