Rating of the best brake disc manufacturers for 2024

Saving when buying such an important part as a brake disc can have a negative impact on the movement of the car, safety for both the driver and the companion sitting next to him. Brake discs must be selected carefully, because the car market is flooded with metal products from various manufacturers, which do not always correspond to high quality.

How to choose brake discs

Motorists, mostly newbies who have recently begun to understand the structure of transport, are faced with the difficult task of selecting brake discs. In order not to make a mistake when purchasing, choosing an impeccable set of parts suitable for quality and capabilities, we suggest using some subtleties and tips:

1. Study your car's service book in detail. Read in more detail the paragraph describing the types of braking systems. A distinctive feature lies in the drive: many passenger cars are equipped with hydraulic controls, and trucks and SUVs are equipped and equipped with pneumatics or a mixed control system. The hydraulics are quite effective, but the pneumatic drive creates the easiest braking.
2. Be sure to take into account the design features. Manufacturers of parts and components for vehicles are entering a production level where various experiments can be allowed with the replacement of design, cheaper materials, and a change in manufacturing technology. The most predictable are standard discs, balanced and highly resistant to damage at maximum temperatures. In the near future, ventilated discs will become especially popular, they are more suitable for driving on city roads. The unusual configuration will provide instant cooling, which is very good when slowing down and changing the speed limit.
3. Before installation, decide on the desired circle suitable for your vehicle. The wider the disc gauge, the larger the size of the pads included in the kit, thus the higher the stopping effect.
4. The presence of perforation has an absolutely favorable effect on the gas cushion that appears during friction of the pads and disc. The perforation plane will help get rid of excess moisture.
5. The existence of grooves - radial notches, with the help of which the working surface on the brake discs is cleaned from small dust particles and adhered debris that falls as a result of the movement of the car. They provide uniform wear during use.
6. The anti-corrosive coating is a great advantage, providing protection against corrosion, rust and contamination. There are many types of anti-corrosion agents used, which also greatly influences the choice.

Rating of the best brake disc manufacturers for 2024

Budget and high quality

Nipparts

Dutch company for the production of high quality spare parts for European cars, providing the largest part of the European markets, selling parts that meet the TUV and ECE R90 certification documents. The company has significantly expanded its range and has more than 16 thousand items that are suitable for numerous Asian brands. The strictest selection, regulation, numerous checks and diagnostics of work performance have helped to significantly reduce the number of defective parts.

Brake elements produced by Nipparts are also in demand among Russian drivers.

Price: 4700 rubles / pair

• good ratio of price and quality of manufactured products;
• characterized by a long service life;
• provide the necessary timely braking, which is so important for any vehicle and traffic safety.

• not found.

Avantech

Spare parts produced at factories by South Korean manufacturers are sold in secondary markets and supplied to the conveyors of the famous automotive giants Kia and Hyundai. This is already a guarantee of quality.

A distinctive feature - the price is half the price of similar products from competitors. Avantech brand brake discs undergo frequent checks, meeting all customer requirements, give one hundred percent confidence in quality and safety. This is a fact confirmed by long-term interaction with the famous Mitsubishi Motors, tests in competitions on difficult race tracks with obstacles.

Discs are made of heavy-duty cast iron steel with carbon additives, treated with special. dye, which serves as a reliable protection against damage.

Price: 1900 rubles / pair

• heavy-duty cast iron steel with carbon additives;
• Stop and Go technology is used, which guarantees strong adhesion of the pads with a minimum grinding time;
• The brake discs produce silent rotation and vibration, which is a huge plus, adding to the brand's popularity.

• not found.

Bosch

A German company that produces building materials and home appliances produces quality auto parts. Bosch devotes a huge part of the time to testing the parts it produces, testing and verifying any unit made.

The German company sells not only retail, but is also a partner of the world's largest concerns: Nissan, Kia (Optima and Rio models), Hyundai (Solaris and Elantra), Renault Logan "," Skoda Octavia ".

Cost: 1100 rubles / pair.

• low price;
• great for getting around city streets;
• the model is designed for European and Asian cars;
• cooperation with global car manufacturers;
• components are at a sufficient level and in good quality.

• crashing is bad for disk performance.

Nibk

A fairly new Japanese corporation on the market, which began its activities in 1998, is part of the well-known concern JNBK Corporation, which specializes in the production of brake parts. The holding manufactures spare parts not only in Japan, but also has centers around the world. The number of partner countries is very large, partners are: Russia, America, Europe.

Often Nibk disks are found on the Solaris model, and on Russian brands, this is Grant or Priora. Complementary user reviews speak of the quality, low price of Japanese-made spare parts. You don't have to expect anything else from a company that is one of the ten best parts for this production.

Cost: 2900 rubles / pair.

• built scheme of centers - intermediaries (with regards to Russian cities);
• decent high quality;
• democratic pricing (with some exceptions);
• compatible with all car brands.

• absent.

Ferodo

Brake discs from the British company Federal Mogul covered 95% of the entire European market for the production of auto parts. The employees are engaged in the manufacture of exclusively automotive braking systems with the appropriate quality, which is in the first place in the manufacturer's priority.

Everyone knows the difficulties with the clumsy, rude brakes installed on sports cars, elite cars made of light alloy. The company coped with the task remarkably, brilliantly solved this problem, surprised by the development of a series of COAT + anti-corrosion discs.

A great company known for its perfect products, it also has decent value propositions.

Cost: 2200 rubles / pair.

• practical price category with a fairly high quality factor;
• are widely represented in the market.

• there is none.

Top best mid-range brake discs

This rating section presents the best brake discs combining excellent performance and affordable prices.

BLUE PRINT

The company produces a huge variety of car parts. Parts of this brand are primarily characterized by reliability, high quality and affordable cost. These results were achieved due to the fact that most of the production is located in Japan. All spare parts are manufactured using new technologies. At each stage of production, the parts are under strict control, so they always meet the highest requirements in all parameters.

With Blue Print brake discs, driving is safe and comfortable. In their production, only high-quality steel and modern technologies are used, the perforation features of these discs make it possible to increase the adhesion coefficient, and, accordingly, reduce the braking distance even in emergency situations.

Price: 4200 rubles / pair.

• high quality steel and modern technologies;
• lack of vibration and extraneous noise during braking.

• there is none.

MASUMA

The production of auto parts for the Japanese brand Masuma is established in many countries of the world. Their factories are located in Japan, China, Taiwan and Korea. Parts from this manufacturer are characterized by an excellent ratio of high quality and low cost. Automotive alliances such as Nissan, Toyota, Honda and many others have been cooperating with the company for many years. A well-coordinated production process using modern technologies allows the company to reduce the size of illiquid assets to 0.6%. This is the best indicator for the number of defective products.

In Russia, brake discs of this brand have gained immense popularity due to the low cost and high reliability of the product. Their price is significantly different from the price tag for factory originals. However, in this regard, the chance of acquiring a fake also increases. To avoid this, you need to choose your supplier carefully.

Price: 4800 rubles / pair.

• Manufacturing using modern technologies;
• discs are made only of high quality material.

• there is none.

SCHNEIDER

The brake discs from the German manufacturer are excellent for driving in extreme conditions. The design features of the spare parts make it possible to reduce the braking distance, reduce the effect of temperature differences, and also remove air from the friction zone of the pads on the disc.

Durable discs work well with Ferodo brake pads as they also have increased wear resistance and long life. Moreover, excellent performance is maintained even with rough extreme driving. However, other brands of pads will do. The main thing is that they are sharpened specifically for extreme driving, since with this type of driving, a huge share of the load falls on the pads.The discs of the German manufacturer have a straight rib structure, along which a large air flow passes, due to which the discs are perfectly cooled.

Price: 3600 rubles / pair.

• suitable for extreme control;
• excellent cooling due to the combination of perforation and ventilation;
• affordable price.

• discs are more suitable for racing.

LUCAS (TRW)

Once it was a separate company, but today it is part of the largest TRW corporation. Auto parts are produced here exclusively for braking systems. Most of the products are supplied to the secondary market, but a small proportion of products still go to the VAG conveyor.

Brake discs of this brand differ from others in black color, and this coating relieves the user from lubricating the surfaces, as well as from applying a special composition to the discs against metal corrosion. The assortment also includes models with increased thermal conductivity. These discs are very lightweight, provide short braking distances and increased durability.

Price: 3000 rubles / pair.

• rich assortment;
• black coating;
• a large proportion of products are shipped to the secondary market.

• low operational ability of disks.

BREMBO

Italian spare parts from Brembo have gained immense popularity in the Russian market. And the users fell in love with the brake discs of this manufacturer. They are great for VAZ cars. But the drivers prefer to take the pads from NIBK. Auto parts manufacturer Brembo boasts a combination of high quality products and affordable prices. The latest implemented technologies have made it possible to increase the wear resistance of the working surfaces and, accordingly, increase the service life.

The company produces not only standard brake discs, but also parts for sports models. After successful testing and application in sports cars, they enter the mass market.

Price: 3700 rubles / pair.

• constant development of new technologies;
• wide range of products;
• the presence of sports brake discs.

• was not found.

Top Best Premium Brake Discs

This section of the rating contains expensive brands of brake discs, the cost of which is fully justified by the highest quality.

FREMAX

The Brazilian brand produces some of the finest auto parts in the global market. The well-known Mitsubishi company cooperates with the company on an ongoing basis. Fremax is the official partner of the most popular racing competition in Brazil. The manufacturer produces high quality parts for car braking systems. Their safety, reliability and durability are due to the company's huge contribution to the development of new technologies, as well as full control of all stages of spare parts production.

The manufacturer has created a special packaging for brake discs made of durable plastic, so no damage to the parts during transportation is threatened. Moreover, thanks to the introduction of Ready To Go technology, auto parts do not need to be degreased; they are already ready for installation. Undoubtedly, brake discs from Fremax are one of the best options for the braking system of any car. All products of this manufacturer are characterized by safety, reliability and durability.

Cost: 5000 rubles / pair.

• Ready To Go technology;
• auto parts do not need to be degreased, they are ready for installation.

• not found.

DBA

Brake discs from this manufacturer did not take the first place in the ranking just because their price is too high even for elite spare parts. The luxury parts are suitable for the braking system of any modern car. The company implements the latest technologies in the production of discs, thanks to which the products can boast of ideal characteristics.One of the most powerful technologies of DBA is Kangaroo Paw, with the help of which the disks are effectively cooled, due to which their service life is significantly increased.

The parts are perfect for extreme driving. Moreover, the discs will wear out evenly after rough driving, since there are perforations and notches on their surface. The T-Slotted system is also used in their production. Everything contributes to excellent disc grip and effective braking even when the car is driving in water.

Cost: 8090 rubles / set.

• efficient cooling of disks thanks to the Kangaroo Paw system;
• the manufacturer has an impeccable reputation and produces high quality products.

• not found.

ATE

The company is part of the huge Continental Automotive Systems corporation and is engaged in the production of auto parts only for braking systems. Due to its narrow specialization, the manufacturer successfully cooperates with a huge number of car brands. Parts are supplied to the conveyor of such well-known concerns as Audi, BMW, Ford, Skoda, Toyota.

The main source of pride of the ATE brand is the tuned brake discs. They can withstand heating up to 800 degrees. The manufacturer managed to achieve such results thanks to the special design of the discs. On their surface there are special grooves and grooves, with the help of which gases and water are effectively removed from the working surface, and all brake assemblies are also cooled.

Price: 4900 rubles / pair.

• cooperation with many car brands;
• supply of parts not only to the conveyor, but also to the secondary market;
• short braking distances and high wear resistance.

• not found.

OTTO ZIMMERMANN

The German company began producing auto parts back in 1947. Already at that time she became famous for her high quality products. However, despite the fact that the spare parts belong to the luxury class, the price for them is much lower than that of competitors in the same segment. The company is not distinguished by conservatism, therefore new technologies are regularly introduced into production. One notable example of this is the Sport brake disc series. There are more than 500 models in this line, and they all differ from each other thanks to modernization. Brake discs from this series are designed for extreme driving.

Most often, disc brakes of this brand can be found on cars of brands such as Opel or Volkswagen, as well as on Porsche supercars.

Price: 4500 rubles / pair.

• huge lineup;
• wide range of prices;
• quite large market coverage.

• not found.

EBC

Auto parts from EMU have a rather high cost, but it is fully justified by the quality, safety and durability of the products. Thanks to their excellent characteristics, the discs have gained immense popularity among those who like to drive. Sports car owners also prefer EVS parts for the braking system. The company has developed a whole series for them - Ultimax. For normal high-speed driving on the track, discs from a simpler series - Turbgroove are suitable. Usually they are installed on cars with increased dynamics, for example, Honda, Infiniti, Subaru and others.

Parts from the Premium series can serve as alternative auto parts for luxury cars. Their quality is beyond doubt. And the high cost is fully justified. Premium brake discs have never received any criticism. Although they are in demand among very influential and demanding buyers.

Cost: 10,000 rubles / pair.

• safety;
• durability;
• product reliability.

• not found.

The rating featured brands producing the highest quality and most reliable brake discs. The assessment was influenced not only by consumer reviews, but also by the characteristics declared by the manufacturer, as well as the opinion of car service specialists.