Ranking of the best composite discs for 2024

The best car manufacturers try to equip their creations with expensive and exclusive wheels. Along with the unique appearance, the combined discs seduce the sturdiness of the structure, which has a positive effect on the functionality of the product.

general description

The term "collecting disc" is understood as a special design consisting of several elements. As for light vehicles, this is an improved copy of the cast and forged versions. Distinctive features are strength and design ideas. The variety of combinations allows you to achieve perfection in the tuning process. So, you can often encounter all kinds of cores.

It cannot be said that this production technology belongs to the category of novelties, since most of the specialized equipment is equipped with multi-piece wheels, the main elements of which are:

• rim;
• lock rings;
• side rings.

Why did the special equipment need such prefabricated structures? They simplify the tire bead process. In this case, there is no talk about aesthetics.

Combined products for passenger cars can include two or three components. In the first version, we are talking about the rim (inner or barrel) and the core. The second case assumes the presence of a rim, core and strap (shelf). All elements are held together with high strength bolts.

Beadlock rims are another prefabricated design. What it is? A bedlock is an anti-dismantling type wheels, an analogue of locks. Such models are often used for racing on rough terrain at low pressure, for example, jeeping. They are often installed for extreme races, drag races and so on. The Beadlock is able to prevent the lid from ripping off the discs at too high a speed.

Positive and negative characteristics of collecting discs

The popular models produced differ in design, material of manufacture, structure, which has a significant impact on the quality of the wheel. The build quality is also important. Let's review the positive and negative features of the product:

Advantages	disadvantages
High maintainability rate.	The design is quite complex.
Possibility to replace worn-out elements with new ones.	The need to constantly look after products.
A variety of design fantasies, unusual shapes.	Average price is high.
The strength of the structure deserves special attention.	The weight is substantial.
The ability to make changes in performance.	Difficult to find on the free market, since a limited number of copies are produced.
You can polish and paint the elements individually.

There is a category of car enthusiasts who purchase a special paste and polish the elements to such a state that they can look like in a mirror. This procedure requires constancy, so you have to start all over again after each vehicle wash.

Manufacturing material

For the production of the combined element, aluminum and steel are used. Steel, mainly, are mounted on special equipment and trucks. The components of light-alloy structures are produced from aluminum, however, various technologies are used. As for the bar and rim, these parts are forged. In their manufacture, molding press machines are used. They are among the strongest and most durable elements.

The core is cast in a matrix. With a strong impact, the central part of the element may receive mechanical damage, and the rim will remain intact. The damaged part is replaced with a new one and you can continue driving. Some popular models are made from combinations of carbon, titanium and steel parts. All elements are assembled at the factory, so it is not recommended to change them yourself.

Criterias of choice

What to look for in order to avoid mistakes when choosing? The advice of professionals boils down to the following: you need to clearly know the required parameters. The dimensions of light alloy and steel elements do not differ. But there are other technical characteristics that are worth considering. Let's dwell on each in more detail:

1. ET. Reach is a measure that is responsible for the position of the wheel relative to the center of suspension pressure. There are three types: zero, negative and positive. Most stock cars have positive offset wheels.
2. DIA. Center hole. If it is less than the prescribed value, then the disc cannot be mounted on the hub cylinder. With an increased size, it is possible to make adjustments by means of bushings (central rings).
3. Looseness. It tells you how many bolts are used to fasten the wheel to the hub and shows the location of the mounting holes, as well as their diameter. So, on VAZ - 2110 parameters are 4 * 98, for SUVs 5 * 112.

With the wrong selection of structures, the characteristics of the vehicle can be significantly degraded. As a rule, prefabricated elements are not used for a budget class car. They are not suitable for everyone in terms of cost, since manufacturers ask for at least 100,000 rubles per set for their quality goods. If you want to install combined wheels on your "iron horse", you need to understand that you will not only have to shell out a significant amount of money, but also constantly take care of them, as well as carry out maintenance.

What are

In order to correctly determine which set of disks is better to buy, you need to know what automotive prefabricated structures are and what they are for, as well as their functionality. Let's dwell on this issue in more detail.

Stamped

Most inexpensive, but heavy. The best for budget cars, so as not to overestimate the cost. In the manufacture of rolled carbon ("black") steel and a stamping method followed by joining by welding. At the end of the manufacturing process, the product is painted with enamel, which prevents negative consequences from an aggressive external environment.

Positive points:

• insignificant cost;
• ease of manufacture;
• sufficient strength;
• maintainability.

Negative points:

• the weight is significant, which leads to an increase in fuel consumption, a decrease in dynamics and controllability, a rapid wear of the elements of the chassis of a car;
• lack of choice in design;
• the need for regular painting;
• the use of plastic caps to improve the appearance;
• low corrosion resistance.

Cast

Have the designation cast. They are considered the most common among drivers.Depending on where to buy the product, you can become the owner of a cheap product from an unknown manufacturer, an expensive original, as well as a well-known brand. You can purchase products with an exclusive solution.

Products are manufactured from a variety of aluminum alloys. In most cases, magnesium or titanium is used. It is manufactured using the method of casting an alloy into a specific shape. The next stage is cooling, after which it is removed from the mold and undergoes a certain number of machining stages. Leading manufacturers use innovative technologies such as injection molding. The process involves pouring molten aluminum into a mold and then applying a certain pressure. The pressure promotes the formation of a solid fine-grained structure, making the product stronger and more durable.

The next manufacturing method is “flow forming”. It is based on mechanical rolling of the rim directly in the hot workpiece, which makes it possible to reduce the weight of the structure, increasing its strength.

Positive traits:

• significant strength;
• light weight;
• increases comfort;
• reduces the load on the suspension;
• available in a variety of colors.

Negative qualities:

• maintainability leaves much to be desired;
• rapid loss of appearance;
• the appearance of minor mechanical damage.

How do stamped versions differ from cast ones? The latter do not crumple, but immediately split. This may not happen immediately, but gradually, if you constantly drive on poor-quality roads and receive a lot of minor blows.

Wrought iron

The model is marked "forged". They are classified as the lightest and most durable. As a rule, they are used in sports cars and serial cars of significant power. They are very popular among connoisseurs of exclusive and tuned products. The manufacturing process is as follows: first, a heated blank is stamped, which is then mechanically processed. Aluminum is often used as a material, less often other alloys.

A technology can be used, thanks to which a disc is cut out of a blank using a special machine. Less durable products are obtained, but of an exclusive plan. This method is used when performing individual orders or unique design solutions.

The advantages of the product are as follows:

• light weight;
• excellent strength;
• stylishness.

The cons are as follows:

• lack of variety of options;
• significant cost.

Composite (collapsible)

They are combined, have the designation 2 - piece or 3 - piece. A distinctive feature is the presence of a certain number of components. They are mainly used for tuning. The hub and center are cast. Forging can be used to increase durability. The rarest type of disc that is not intended for everyday use. Topping the rating of quality products. Basically, they play the role of an image element, they are made to order. For them, motorists are ready to lay out significant sums.

The advantages include:

• the strength of the forged rim;
• titanium bolts for fastening;
• stylish appearance;
• strength;
• ease;
• maintainability.

There are not many disadvantages, but you should pay attention to them:

• not everyone can afford it;
• there is a low-quality fake.

Other types of products

In specialized retail outlets, along with the above main types, you can find spoke wheels that are designed for retro cars and other unique wheeled vehicles. Dealers offer composite rims for supercars. They are made of carbon and plastic. You can order custom discs for an individual project.

Which company is better to buy products depends on many factors, including the preferences of the person. There are several options for where to buy the product you like. Currently, a large number of branded stores are open for the sale of this type of product.If the variety of models is confusing and you cannot figure out how to choose the right kit, you should contact your sales manager for help. He will acquaint you with the rating of the best manufacturers, with the available functions, and help determine the cost.

There is another way to purchase discs - to order them online in the online store. According to buyers, this is not the best option. Even if you read the positive reviews, there is no guarantee that a low-quality fake will not come.

Ranking of the best composite discs for 2024

Most inexpensive

MKW MK - F 34 LM S 9 * 20

The prefabricated model is made of light alloy. The rim width is 8.5 / 9 / 9.5, the rim diameter is 20/22. Mounting holes - 5/6 pieces. Departure indicator - from 12 to 55 mm. It is very popular among car enthusiasts.

The average cost is 7800 rubles.

• high build quality;
• reliability;
• acceptable price;
• long service life;
• sold in all outlets.

• not identified.

Wheel rim 7.0 - 15 D 345

The scope of use of R15 discs is trailers and semi-trailers. Made of high quality steel. They weigh 20 kg. Suitable for all wheels. Withstand a load of 2500 kg.

How much does the product cost? It can be purchased at a price of 5750 rubles per unit.

• universal;
• high quality;
• reliable;
• durable;
• practical;
• maintainability;
• The optimum ratio of price and quality.

• not installed.

Products of the middle price segment

Schmidt VN - Line

The prefabricated light alloy structure enjoys a well-deserved popularity among motorists. The presence of five mounting holes makes the model reliable and safe. Rim diameter and width - 18 x 8.5 inches, offset - 45 mm, drill - 5 * 112.

You can buy the product at a price of 11,061 rubles.

• build quality;
• operational period;
• the possibility of self-repair;
• value for money;
• reliability;
• practicality;
• design.

• not installed.

Mi - Tech MK - F - 34

A prefabricated structure can be purchased in specialized stores, or you can make an application in the online store. In most cases, sellers put up a set of four units, for which you will have to pay 29,160 rubles. It is rare to find piece trade in this product. Specifications: rim with a diameter of 20 "and a width of 9", offset - 35 mm, mounting holes - 5 pieces. A light alloy is used in the manufacture.

• insignificant weight;
• strength;
• reliability;
• operational period;
• maintainability;
• good design;
• optimal combination of price and quality.

• it is impossible to buy a product in one copy.

Schmidt CC - Line

The manufacturer produces a design of decent quality and at an affordable price. Made of light alloy. There are 5 or 6 mounting holes depending on the rim width. The material of manufacture is a light alloy, characterized by high quality and reliability.

The price of the product is 11772 rubles.

• safety;
• weight;
• self-repair;
• does not require constant care;
• operational period.

• absent.

Premium class goods

OZ Racing Botticelli III

Black products with matte finish are of high quality and interesting appearance. Made of light alloy. Mounting holes - 5 pieces, rim parameters - 9 * 21 inches. Departure indicator - 55 mm. Made by forging, which makes it reliable and durable.

The average price is 100,430 rubles.

• design;
• practicality;
• operational period;
• safety;
• versatility;
• functionality;
• quality;
• reliability of paintwork;
• maintainability.

• absent.

Conclusion

It is quite difficult not to make a mistake in choosing disks. The correctness of the choice is influenced by certain factors, such as the condition of the road surface, the intensity of use, the type and weight of the car, the design features of the car, the climatic conditions of the region of residence, and so on.It will be much easier to heed the recommendations of the car manufacturers. You can buy products in the online store, but there are often cases of cheap fakes instead of products from leading world brands. Therefore, experts advise to visit specialized outlets where certified goods are sold.

Of great importance is which company was engaged in the release and how much it worries about the quality of its products and about its image. Models of German, Japanese and South Korean production are getting a lot of attention. They use high quality materials and innovative technologies, as well as test structures for safety and reliability. Russian-made goods are also deservedly popular if firms have been on the market for a long time and there are no complaints about their products.