Ranking of the best indicator tripods for 2024

The instrument stand is designed for firmly holding the indicators of measuring instruments. Consists of a massive metal base in which a magnet is placed. The package contents depend on the type of tripod.

Magnetic tripods and stands for indicator heads are distinguished by the presence of a plate at the counter, in the form of a plate, for placing the measured parts on it. The tripods have only a measuring head. Users often mistakenly combine the two. Magnetic tripods perform one function - measuring, but differ in power, rigidity, and fastening strength. This article has compiled a ranking of the best indicator head tripods for 2024.

Where and how it is applied

Not a single enterprise can do without a dial indicator, and the suspension system always goes in tandem with a tripod, often magnetic. Since it is the magnetic system that makes the structure heavier and makes it easier to work with the measuring pointer.

The device is used to establish relative measurements and track deviations from the desired dimensions of a given shape of parts. The indicator shows how much the received part differs from the accepted standard. And later it is adjusted or disposed of. Such a device helps large enterprises to significantly save the budget, the purchase of expensive devices and time. Holders for the device should be as stationary as possible and meet the requirements of GOST for rigidity. Tripods are either bulky and heavy, or screwed tightly to a flat surface. The magnetic base of such stands and tripods is attracted to metal and helps to avoid problems with finding a convenient place and position for the device.

Dial indicators are used in the production of devices and parts, mechanical engineering, metalworking, to measure deviations in the properties and quality of metals, to adjust mechanisms, to find out the percentage of equipment wear. At the same time, a good tripod and stand will last a long time if used carefully. Attachments are subject to frequent change.

Order of use

• The dial is set at 0 - this is the initial position (reference).
• The measuring rod is lifted with the help of the "ear" located on top of the ICT and at the same time the reference part is removed from under the indicator.
• Measured the part is placed between the measuring head and the base of the tripod (a ball of hard metal).
• The dipstick is lowered.
• Readings are taken of the deviation of the size of the part from the reference measurement on the dial.

GOST

Since 1970, state quality standards for these devices have not changed, but were adjusted in 1998. The Soviet quality document contains the following designations:

• C - magnetic stand;
• low magnetic tripods ШМ - IIН and high ШМ-IIВ.

Parameters for CMM - IIH:

• column height: 250 mm and above;
• rod overhang: 200 mm;
• head hole diameter: 8 mm;

The parameters for the ideal of foreign products do not differ much.

The design of the ShM - IIH and ShM-IIV are similar:

• magnetic base for the column;
• kernel;
• indicator supply device;
• a hinge compressed by a spring.

General rules for putting the tripod into operation:

• the design of the product satisfies the condition: the installed indicator head is installed in all positions;
• no perceptible pitching when installed on a first class surface plate;
• force of separation of the tripod from the surface with a roughness of 0.25 microns - 30 kg;
• allowable tripod deflection 5 m;
• fine adjustment microscrew movement no more than 0.0100;
• full stroke more than 3 mm.

For non-magnetic tripods, the stiffness is calculated as follows: 0.1 kg / 0.005 mm = 20 m / per 1 mm.

For magnetic fixtures, flatness tolerance is not assigned. Warranty for Soviet models 18 months.

USSR, China and Germany

The most popular tripods on the market are divided: by price - cheap, expensive, by manufacturer - domestic and foreign. Each model in the line of this or that company differs in one way or another in its characteristics. Yet each manufacturer has distinctive features. For China, this is a low price, for Germany - new technologies, for Soviet tripods - a convincing design and durability.

China

The Chinese models, all as one, are defined by the cam mechanism. The rods press on the ball, with the help of which it is fixed to the bracket. Such tripods are not advised to be used in professional activities, but ordinary people give advice: you bought a Chinese tripod from AliExpress, immediately check for suitability by scrolling the ball with which the mechanism is attached to the platform. It often happens that the holder jams, and the plastic parts initially have creases and burrs.

Chinese models of low prices, from 850 to 1200 rubles, are made of aluminum, with a steel ball and plastic fasteners. The manufacturer recommends that the buyer keep the device switched on to avoid demagnetization. Depending on the price and size, these tripods can support a weight of 5 to 30 kg. Another problem is the inability to install the indicator in the right place, due to the wrong location of the screw, on almost all Chinese models. However, such products are in high demand due to their low price. And they are quite suitable for domestic use.

Germany

This country - the manufacturer has very expensive and average price models. There is a cam mechanism and a comfortable flexible base. And also it was the manufacturers from Germany who made the perfect hydraulic tripod for the clockwork suspension. The product has an accurate fine adjustment, without errors. Oil is poured into the hydraulic rack, in the middle there is a holder for an indicator, which is also clamped with a screw. According to experts, this tripod is the best for accurate measurements. The price varies from 15 to 22 thousand rubles.

Soviet

The main disadvantage of Soviet models is the absence of a prism necessary for mounting on a round or curved surface. A powerful body, a magnetic base, which helps to make accurate measurements, thanks to the pull and the correct moderate tension of the rod, is also a minus - such a design is overall and weighty, about 5-6 kg when the weight of the hydraulic is 2 kg. If the magnet is working properly, such a tripod will hold up to 80 kg. In the event of a breakdown, the masters advise you to contact a specialist; during repairs, it is not allowed to disassemble the base with a magnet, since the stand is also magnetized in production, and there is a possibility of spoiling the device. Monolithic Soviet construction is adjusted according to GOST up to 0.0100. It has high rigidity and a deflection of 5 microns. With strong vibration, the system finds balance. The scale returns to its original position. Average price: 4 - 9 thousand rubles.

The comparative table shows the indicators of four mechanisms: Chinese with a height of 335 mm; Chinese 175 mm, hydraulic (Germany) and Soviet terminal.It can be seen from the calculations that a Chinese tripod with a height of 335 mm has the highest magnet power, not a strong deflection and the lowest rigidity. From this it follows that: rigidity does not affect the measurement error and load power.

When choosing a tripod, the fact that there is no suspension - a clock mechanism - is taken into account. The indicator is selected according to the price and quality of the tripod. So on a budget Taiwanese tripod, do not put an expensive German suspension.

Homemade tripod

This master class on making a tripod for dial gauges will help you save on the purchase of an expensive device. Tripod components can often be found at home or purchased for a small price. For a homemade rack you will need:

• base holder;
• 2 shafts of 179 mm each and a diameter of 10 mm, if you buy, then SFC10, one shaft, with an M4 thread for fastening to the base;
• support for a tripod with a circumference of 8 mm;
• supports 3 pcs.

Since this invention does not involve a magnet in the base, the support must be heavy to prevent rolling. The base - the holder is taken from heavy metal, not from aluminum and certainly not from wood.

Step-by-step instruction:

• a drill in the base makes a recess (hole) 6 mm and a diameter of 10 mm, the tripod will be installed vertically, exactly in the middle;
• the bases are sawn off at the shaft holders;
• To fix the holders to each other, a hole with an M4 thread is made on the side. Deepening is made by 0.4 mm.
• the indicator is fixed in the SK8 support with thumbscrews;
• After all the parts are ready, you can assemble the tripod.

For the stability of the structure, on the sides of the platform on which the shaft is supported, it is advisable to drill holes in order, if necessary, to fix the invention on the surface. If everything is done correctly, then when measuring, the indicator arrow will "jump" by a maximum of 0.01, as in conventional purchased average devices.

Top 6 in-demand indicator stands for 2024

Purchasing certified products from a variety of tripods is not just because indicator structures do not have to be compulsory certification. In order to choose a quality model, you should pay attention to the rating of the selected models, collected on information from customer reviews.

Asimeto 601-02-0

A magnetic tripod for a measuring device with fine adjustment is offered by Germany, and partner stores carry out online sales for 1590 - 2500 rubles. The indicator is mounted in holes with a diameter of 3 / 8.8 mm or on a base plate. The surfaces and base of the magnetic box are smoothly machined and firmly attached to the metal plane. Made for indicators with a dovetail connection type.

Specifications:

• adjustment 601-02-0;
• weight 1515 kg;
• rod diameter 12 mm;
• volume 0.00168 m3;
• length including platform 176 mm;
• hole diameter 3 / 8.8 mm;
• magnet size 60 * 50 * 55.

• complies with GOST;
• low price;
• stable body.

• magnet strength: 10-12 kg;
• short;
• not suitable for vertical plane.

Micron MSH-32

Czech Magnetic Indicator Articulated Tripod Micron MSH-32 with a standard screw fastener has a base of 320 mm and a magnet reinforcement of 300, suitable for measuring instruments weighing up to 40 kg. A standard watch-type pendant is suitable.

Specifications:

• height 320 mm;
• type ISSH - 32;
• weight 2 kg;
• for heads 0.01 mm.

• Czech production and assembly;
• tight mount;
• durability and strength.

• high price, 7-10 thousand rubles;
• in some positions it is difficult to change direction;
• withstands up to 25 kg, not as indicated by the company.

WEDO WD 1407

A distinctive feature and plus of this Russian model is the presence of slots for thick and thin indicator necks. As well as anti-corrosion powder coating of the tripod. According to customer reviews, this model is excellent for checking the grip divergence of the testing machine.

Characteristics, mm:

• magnet - 600;
• length - 570;
• fastening by the ear;
• width - 500.

• strong magnet;
• reliable fastening;
• acceptable price.

• heavy - 1500 kg;
• plastic handle clamp;
• assembly in China.

Ciriff 014767 176 * 150

The Russian manufacturer Ciriff in its model 014767 indicates the ability of the built-in magnet to lift the weight up to 80 kg (in the presence of the magnet reinforcement 785). However, in operation, according to customer reviews, the tripod shows a maximum separation force of up to 8 - 10 kg. Traction indicators differ significantly with GOST. The tripod is included in the State Register of Measuring Instruments.

Specifications:

• base length: 63 mm;
• Base size 63 x 50 x 55 mm
• Weight 1.4 kg
• Rack sizes 12 x 176 mm and 10x150 mm

• weighty durable construction;
• low price;
• neat assembly of the device.

• when detached, the magnet holds no more than 8 kg;
• large loft in the holder;
• short arcs.

CNIC MC - 29 L 320 mm

Magnetic tripod with flexible base assumes installation of indicators with divisions from 0.01. Due to the flexible base, it can take the required position. In this case, the stand will remain motionless. The rest of the mechanism of operation is similar to other magnetic tripods. Chinese manufacturer and assembly. 1 year warranty from the company.

Specifications:

• base - 58 * 50 * 55 mm;
• height - 320 mm;
• weight - 1300 g;
• magnet power - 60 kg.

• does not require additional fastening on vertical surfaces;
• large separation of the magnet;
• the price is within 2200-2500 rubles.

• does not reach small measured parts;
• not suitable for round surfaces;
• short-lived base.

Groz GR 03405 - MB / 31F

The Indian indicator tripod is equipped with high power permanent magnets, capable of holding a mass of 50 to 60 kg. Plus the device, in easy contact with uneven surfaces, thanks to the V-groove.

Specifications:

• Base size: 50 x 70 x 55 mm;
• departure 145 mm;
• screw: M 10 x 1.5;
• size 50x70x55 mm;
• Height - 258 mm.

• the supply is switchable and holds well;
• price 2600-3000 rubles;
• build quality.

• fragile plastic parts;
• addition is fixed;
• flimsy packaging of goods, deformed during transportation.

Conclusion

Referring to a selection of information on the best tripods for 2024, it is worth noting that Russian and Chinese-made magnetic mechanisms are in great demand. Chinese tripods are most often purchased on AliExpress and are used for measurements in the home. According to customer reviews, the main criteria for selection and use are highlighted: they determine the purpose of the tripod with an emphasis on: price - quality; understanding that the strongest and most reliable are made in accordance with GOST, without the use of more than 10% plastic and aluminum; pay attention to the state and power of the magnet.