The most troublesome and troublesome cleaning is after renovation work, where ordinary cleaning agents for order will not be able to cope with highly complex dirt, especially if you need to get rid of concrete on the surface. There are various preparations on the market that effectively remove any dirt. However, each tool has its own purpose, suitable for a specific type of coating. In this regard, the question arises of how to choose the right product. Attention is given to an overview of the best preparations for external and internal cleaning after renovation for 2024 with their pros and cons.
Content
In comparison with conventional cleaning products, the content of caustic substances in them is many times less than for the products of the group under consideration.
Products are classified into three categories: acidic, neutral and alkaline. The first group is used to remove complex building contaminants. In order not to make mistakes when choosing, you need to focus on the "pH" - a range of numbers from 0 to 14. Explanation:
Note! The higher the acidity, the more effective the remedy.
Acidic substances get rid of mineral contaminants (for example, rust, lime and calcium deposits, efflorescence and scale). The product may contain one or a whole complex of acids.
Surfactant is an indicator that combined pollution can be cleaned. The fluid can prevent corrosion (inhibitors are sometimes added).
If you want to get rid of heavy mineral deposits, rust from acid-resistant surfaces, then the pH should vary between 0-2.
Note! Cement is a heavy mineral contamination.
If it is necessary to remove lime deposits, rust, residues of dry building mixtures, efflorescence from hard and chrome-plated surfaces, to clean phosphorus, faience, brickwork, ceramics, tiles or facing tiles, then a preparation with a pH of 2-5 is required.
If cleaning of plumbing blocks is planned, then:
Important! Acidic solutions are not suitable for marble surfaces.
Based on the above information, several statements can be made that will help you understand which product is better to buy.
There are two categories of products: professional and household series. The average volume for cleaning companies is 5 liters, for home conditions - 500-1000 ml.
If the composition contains one acid, then it is suitable for cleaning specific contaminants, if there are several of them, then the product is considered universal and suitable for a wide range of dirt and surfaces.
In most cases, low-cost home remedies are used only for internal work. The professional series is suitable for facade work.
Depending on the degree of complexity of the pollution, a solution is made (the proportions are indicated in the instructions). Some models come with a natural function - they can be used in their pure form (rare).
Note! To work with acidic liquids, protection is always required: gloves, glasses, clothing, depending on the degree of harm.
If the tool is selected for professional use, then it is better to purchase it in hardware stores. If the purchase is made for living conditions, then as a place of purchase, you can choose a point of sale with construction products or household chemicals, as well as order products in the online store.
Ordering online is easiest if the time allows, and customer reviews will tell you about the effectiveness of the tool.
This category includes Russian-made goods. All of them are supplied in plastic containers, have the same useful volume, but their composition and method of application are slightly different, which affects the cost of the product. Top manufacturers:
Note! Large volumes of solutions have found mainly professional use and are operated by cleaning companies.
Purpose: for tiles, glass, granite, marble on which there are remnants of cement, concrete, as well as rust, limescale, building mixtures.
The product comes in a white plastic canister. At the top there is a handle for easy transportation of liquid and a neck with a green screw cap. The color of the solution is blue.
Recommendations for use: 200-300 g of substance per 1 liter of water.
Specifications:
Vendor code: | 125305 |
A type: | acidic |
Capacity parameters (centimeters): | 13/18,5/30 |
Weight: | 5 kg 900 g |
Nominal volume: | 5 liters |
Composition: | organic + inorganic acids, water, colorant (blue), aroma additive, surfactants |
Hydrogen indicator: | 2 pH |
TU: | 2380-005-92962787-11 |
Shelf life: | 18 months (1.5 years) |
Manufacturer country: | Russia |
By price: | 754 rubles |
Purpose: for cleaning acid-resistant surfaces, cleaning and washing brickwork and joints.
A yellow liquid in a white translucent canister with a handle and a screw cap, used to remove residual cement, mortars, lime and salt deposits, also cleans scale, glue, grout, rusty stains and calcium carbonate efflorescence. Depending on the degree of contamination, the solution is prepared with a different dosage (1:10 or 1: 100).
Recommendations! 1. During the cleaning process, you must use protective gloves, a suit and goggles. 2. Not compatible with chrome, copper, marble, anodized aluminum, galvanized or enamelled surfaces. Also, the solution is not suitable for processing artificial stone, parquet, laminate, glazed tiles.
Specifications:
A type: | concentrate |
Net weight: | 5 kg 130 g |
Volume: | 5 liters |
PH level: | 1 |
Capacity parameters (centimeters): | 15/20/23 |
Storage temperature: | + 1- + 25 degrees |
Composition: | inorganic acids, water, nonionic surfactants, cps |
Storage stability: | 36 months (3 years) |
Manufacturer country: | Russia |
Average price: | 675 rubles |
Purpose: for removing rust, mortars and efflorescence, cleaning facades.
One-component cleaner, supplied in a white canister with an upper handle and a lid (black) that is screwed onto the neck. Used for indoor and outdoor use. It is applied on the surface with the help of a sprayer, it foams a little, easily scrapes the area from dirt.
The label describes in detail how to dilute the liquid and how to properly clean the desired area.
Specifications:
The basis: | acidic |
Application area: | for cleaning acid-resistant surfaces: floors, walls, facades |
Vendor code: | 013-5 |
Nominal volume: | 5 liters |
PH indicator: | 1.5 |
Foam degree: | low |
Washing temperature: | 20-40 degrees |
GOST: | TU 2381-003-87363917-2012 |
KPAV: | 5 percent |
Shelf life: | 5 years |
Manufacturer country: | Russia |
Average cost: | 520 rubles |
This series includes household chemicals, the volume of containers of which does not exceed 1000 ml. In terms of their composition, storage capacities, they differ from each other, which affects the type of surfaces with which a particular product can work. Popular models come from foreign and domestic firms. The best representatives:
Note! Almost all presented models are universal.
Purpose: for post-construction cleaning.
A black plastic canister with a large side handle and a mouth with a red screw cap-button, contains an acidic liquid that removes rust and limescale from surfaces. Easily and quickly removes the surfaces (not sensitive to acid) from the remains of cement, mortar.
Solution preparation: 200 ml per liter of water; get rid of lime and cement 1: 5; for very heavy soiling use a 1: 3 ratio.
Application: the liquid is applied to the surface, wiped with a sponge and washed off with water, after a few minutes.
Recommendations: 1. Before work, it is necessary to check the surface for resistance to the agent. 2. Use rubber gloves during work. 3. Do not allow the liquid to dry on the surface until the end of cleaning.
Specifications:
A type: | concentrate |
Volume: | 500 ml |
Packing parameters (centimeters): | 13/5/23 |
Weight: | 1 kg 300 g |
Scope of use: | for various surfaces |
Composition: | distilled water, active ingredients, hydrochloric acid |
Surfactant: | APAV no more than 5% |
Release form: | liquid |
Manufacturer country: | Israel |
How much is: | 370 rubles |
Purpose: for cleaning surfaces during the repair of buildings and structures, swimming pools, facades, floors and walls in rooms, as well as equipment for preparing and transporting concrete, external and internal washing.
Description of appearance: white flat bottle with green cap containing a detergent that quickly removes cement residues, deposits and rust. Feature of the product - contains a corrosion inhibitor, is used for processing tools, external and internal work.
Instructions for use:
Dosage: for stubborn stains, the liquid can be used in its pure form; for cleaning after repair, you need to dilute in a ratio of 1: 100, that is, 10 ml per 1 liter; for cleaning cement and other difficult stains - 1: 5, that is, 200 ml per 1 liter of water.
Note! Gloves must be worn during work.
Specifications:
Vendor code: | 125441 |
Scope of use: | building |
Nominal volume: | 1 l |
Release form: | bottle |
A type: | liquid, acidic |
PH indicator: | 2 |
Composition: | water, organic acids, non-ionic surfactants, flavor, dye |
Shelf life: | 2 years |
Storage temperature: | + 5- + 35 degrees |
Suitable: | for granite, glass, polymer coatings, tiles, etc. |
Manufacturer country: | RF |
Price: | 217 rubles |
Purpose: for cleaning floors.
A white plastic bottle with a handle and a measuring screw cap, contains the concentrate in the form of a gel. It has an antibacterial effect, eliminates unpleasant odors, removes lime.
Material the gel interacts with: natural / artificial stone, wood, rubber, PVC, vinyl, ceramics and laminated surfaces.
Features: up to 5 freeze / thaw cycles are allowed, while all properties are preserved in their original form.
Specifications:
A type: | gel |
Volume: | 1 liter |
Package dimensions (centimeters): | 7,15/25,5/12,05 |
Weight: | 540 g |
Dosage: | 1 cap for 3 liters of water |
Cap capacity: | 30 ml |
Equipment: | bottle |
Storage temperature: | + 5- + 35 degrees |
Composition: | functional additives, water |
Guarantee: | 2 years |
Manufacturer country: | Russia |
Cost: | 175 rubles |
Purpose: for cleaning ceramic tiles of sanitary ware, as well as chrome-plated, varnished surfaces from the oldest residues, deposits, dirt after cement and lime mortars.
White plastic bottle with blue screw cap can be used inside and outside buildings. Serves to wash away dirt, residues and stains arising from minerals contained in the water, rust and others. The product is applicable for the treatment of sanitary ware, stone and ceramic tiles (clinker, gres, terracotta, glazed), as well as chrome-plated, lacquered, stainless steel and artificial surfaces.
Since the solution contains inorganic acid, it cannot be used on substrates that are not resistant to it (for example, marble, enamel). Protective gloves must be worn during cleaning.
Note! The instructions describe in detail how to use the drug and dilute it for a specific type of pollution.
Specifications:
A type: | concentrate |
Weight: | 1 kg |
Packing parameters (centimeters): | 10/24/10 |
Tara: | bottle |
Solvent type: | inorganic |
Cleaning tools: | brush, sponge |
Storage temperature: | 0+ degrees |
Shelf life: | 36 months (3 years) |
Manufacturer country: | Poland |
Average cost: | 350 rubles |
Purpose: for quick and complete removal of traces of cement, lime, whitewash from glass, plastic, tiles, porcelain, enamelled products and work clothes, construction tools and containers.
Liquid in an attractive easy-to-use bottle (with a handle), which is equipped with a screw cap (a measuring cup). It quickly removes cement and lime after repairs and other types of dirt.
Tips! 1. Do not mix with other products that contain active chlorine. 2. After applying the liquid, you need to leave the surface untouched for some time for a more effective effect, and then rub with a brush and rinse with water.
Specifications:
A type: | acidic |
Vendor code: | 300148 |
Useful volume: | 1 liter |
Weight: | 1 kg 280 grams |
Packing size (centimeters): | 8/14/25 |
Where applies: | at home |
Surfactant: | Nonionic surfactants no more than 5% |
Production: | Russian |
By price: | 295 rubles |
Purpose: for the removal of mortars.
Mini version of the model "CEMENT CLEANER 125305" from this manufacturer. The bottle is flat white, transparent, the color of the liquid is blue. The mortar is not compatible with materials: slate, marble, travertine. In addition, it cannot be used on chrome-plated, enameled surfaces, concrete and glazed tiles.
Recommendations! A preliminary check is required for reaction with the solution in an independent place of the working surface.
Ingredients: various acids, dye, aroma additive, water and surfactants.
Specifications:
A type: | acidic |
Nominal volume: | 1 liter |
PH indicator: | 2 |
Specialization: | after renovation, for tiles |
TU: | 2380-005-92962787-11 |
Working temperature: | + 0- + 35 degrees |
Container material: | plastic |
Guarantee period: | 1 year |
Production: | Russian |
Average price: | 197 rubles |
According to buyers, the best cleaning products after repair work are Russian-made goods. Domestic manufacturers produce solutions for various purposes, volumes and compositions. There are inexpensive and expensive lines. The first includes products for domestic use, the second - of professional value (cleaning). The main difference between the two categories is the displacement.
Table - "Popularity of models of cleaning products after repair in 2024"
Name: | Brand: | Nominal volume (l): | A type: | Average price (rubles): |
---|---|---|---|---|
"CEMENT CLEANER 125305" | "Grass" | 5 | acidic | 754 |
"Duty Extra 118-5" | "PROSEPT" | 5 | concentrate | 675 |
"Alfa-19" | "Pro-Brite" | 5 | acidic | 520 |
"Cementin" | "Bagi" | 0.5 | concentrate | 370 |
Cement Remover | "Grass" | 1 | acidic | 217 |
"Gel for cleaning after renovation and construction" | "PREMIUM HOUSE" | 1 | concentrate | 175 |
"SZOP" | "Atlas" | 1 | concentrate | 350 |
"From cement" | "Unicum" | 1 | acidic | 295 |
«217100» | "Grass" | 1 | acidic | 197 |
Which firm is the best tool is up to the buyer.The common displacement is 1 or 5 liters. You need to buy a cleaner based on the front of the upcoming work.