A blockage in the pipes creates a lot of inconvenience, sometimes you have to invite a plumber to cope with this unpleasant phenomenon. Not everyone knows that you can remove the cause without someone's help. This is done very quickly with chemical reagents, which are available in various forms. They include chlorine, alkali, soda, surfactants. The reagent interacts with particles that impede permeability in the pipe and turns them into a liquid substance. In addition to cleaning, the pipe cavity is disinfected and the fetid odor is eliminated.
When working, you need to take protective measures, since even the most gentle and environmentally friendly products can harm the human body. The substances should not come into contact with the skin or mucous membranes, therefore work should be carried out with gloves and try to avoid splashing liquids.
Content
The appearance of an unpleasant odor, a decrease in the rate of drainage of a liquid or a rise in the water level requires urgent cleaning measures, otherwise the pipe may become completely clogged and fail completely.
You can easily clean sewer pipes with chemicals, but only with the use of protective equipment. Before starting work, you need to wear a mask, gloves, goggles. The room in which the work is carried out must be well ventilated. Modern substances contain acid or alkali. It is not allowed to simultaneously use funds with a different chemical composition, since individual components can react with each other and thereby harm the system. You need to work in the following sequence:
A list of the best, according to experts, remedies for removing blockages in pipes is offered. When compiling the rating, customer reviews were taken into account. Based on the recommendations, you can make the best choice.
Shop counters are full of a variety of household chemicals, this fact puts consumers in front of a choice. The question has always been which means for cleaning the sewage system is the most effective and safe.
There are three types of blockage chemicals: gel, granular (or powder), and liquid. The first two types are more effective, and granules and powders are more active, but chemistry in the form of gels is less harmful to the health and condition of pipes. The basis of all products is caustic soda, in chemical terms, sodium hydroxide or caustic soda. The substance is the strongest solvent for organic compounds, it acts almost instantly.
Features of solid and powder chemicals:
When choosing household chemicals, you should carefully study the composition. Many reagents are based on an alkali, such as sodium hydroxide. The chemical copes well with oily film, soap deposits and food residues. Powder and granular products are usually packaged in single-use sachets or large containers that can hold the powder volume for multiple uses.
Dry mixes are convenient to store. Usually they have a packaging made of durable polyethylene, which during transportation will not leak aggressive chemicals.
They work equally well on old cast iron and new plastic. Powders and granules differ in the concentration of the active substance. Granules act with more aggressiveness; when using them, more attention should be paid to dosage. Concentration affects price. The most effective granular products are more expensive, but also give you better results.
The granular preparation has a very high concentration. Small particles, compressed into granules, penetrate into clogged places and eliminate them. The chemical will dissolve even the toughest contaminants. Approximately 30% of the total composition is alkali, which corrodes any organic matter on its way, from food debris to hair. To clean the pipe, 70 to 100 grams of the concentrated substance are taken. This volume is enough to return the pipe's patency. It only takes 5 minutes for the magic granules to clear the drain and effectively remove unwanted odors.
Helps to clean the sewer pipe by dissolving accumulations of animal and vegetable dirt and mineral deposits inside pipelines and drains. It is used in household premises, cafes, restaurants. When dissolved in water, the alkaline level rises and heat is generated. The high concentration of the active substance in the composition of the product helps to quickly eliminate the blockage, while the sewage capacity is fully restored. You don't have to worry about pipe safety.
The active ingredient is sodium nitrate and caustic soda. The granules are blue.Positive customer reviews of the Chirton brand testify to the effectiveness and comparative safety of the chemical. The impression is overshadowed by the presence of a pungent odor, but it quickly disappears. After 15 minutes, not a trace remains of it. One sachet is enough for a single use.
The remedy is to the liking of people who are in search of a universal product that saves from blockages. It has a lower concentration than other granular products. Alkali does not show its effect very strongly, so the product spares any coatings. It can be added to sewer drains, sinks, bathtubs. At the same time, enamel is not damaged, rust is effectively removed. A good combination of price and quality. It is important to remember about safety measures. Personal protective equipment (gloves, goggles, masks) will help to avoid unpleasant moments, such as skin irritation or mucosal burns. Packaged in sachets, dosed at one time (60 gr.).
The granules are optimally packaged, and one sachet is designed for one cleaning, no need to measure milliliters, use measuring cups. Of course, a very important point: the absence of chlorine in the composition. That is why the substance almost does not smell, moreover, it does not corrode pipes. Can be used for preventive measures. Avoid contact with surfaces with copper, gold and enamel coating, this will have a detrimental effect on the condition of plumbing from such materials.
The reagent contains caustic soda and surfactants. Under the influence of hot water, after adding the agent to the drain, a reaction occurs. Very corrosive, but highly effective. Eliminates any plugs in pipes in just 3 minutes. Recommended for severe blockages, but preventive measures are best done with something more delicate. Granular particles dissolve easily in water and free from any blockages consisting of fat accumulations, hair tangles, limescale, food waste, paper and plastic waste. Alkali-based chemically active components do not have a detrimental effect on PVC pipes and corrugated parts, therefore the products manufactured by the Israeli company Bagi Professional are quite suitable for cleaning plastic pipes.
This tool is one of the most aggressive, which obliges you to protect your body parts and respiratory organs as much as possible during work. Due to the strong aggression, it is better not to use this chemical on worn pipes. A pungent odor can cause poisoning, it is recommended to work in a well-ventilated area.
With the help of a cheap granular substance, you can clean the plugs qualitatively. Transparent white granules will clear the blockage in a short time. To cleanse the sewage system, pour the substance into the drain and add one glass of water. The composition contains soda ash (30%), so the powder is not very caustic. Sold in a cardboard box of 4 sachets.
Powder can clear difficult blockages. Composition: sodium and potassium hydroxide (30%), salts and surfactants. A high concentration of reagents allows you to quickly fix the problem. It will help to decompose organic matter and mineral deposits in a few minutes.It has a balanced formula, so the chemical is less caustic, unlike representatives of leading companies, it is suitable even for worn-out drains. For cleaning, add a couple of tablespoons of powder to the drain. This alternative would be fine. Economy option saves the family budget. Perfectly liquefies complex sediments in sewage.
Efficiency is provided in a high content of sodium and potassium hydroxides. When the substance enters into a reaction, an unpleasant pungent alkaline aroma will be felt, which will disappear after 5 minutes.
In this form, it is allowed to be used for pipes made of all materials. Gel preparations have their own advantages. A viscous substance envelops parts of the sewage system with a slimy film, which has a caustic effect on any accumulations that impede the outflow, saves from plaque, and prevents the appearance of new deposits. Small debris and grease slide along it and pass further into the pipeline. The gels contain active substances that dissolve fat, soap, hair. They are selected taking into account the properties of modern materials and do not corrode them. Therefore, gels can be used to clean plastic pipes. Many gels are more suitable for preventing contamination of sewers.
Cleans pipes made of metal or plastic. Has a good formula for effective cleaning without damaging the walls of the sewer. With a minimum of pungent odors, the problem of clogging will be solved in a short time. Due to its thick consistency, dosage is facilitated. Good penetration deep into the gap ensures that any unnecessary accumulations that have blocked the pipe are dissolved. The reaction lasts a little over 5 minutes. If the pipes are clogged in large areas, the exposure time can be increased. The gel will destroy not only organic matter, but also inorganic contaminants such as paper and polyethylene.
Tiret Turbo removes unpleasant odors for a long time.
Excellent for removing any foreign material that might obstruct fluid drainage. Dissolves organic matter, hair, debris and other debris in the drain. Acts gently, without damaging the surfaces to be cleaned. Gives great results in minutes. The gel can handle complex blockages. Thanks to the formula, it acts safely and gently on pipes, ensuring their integrity.
For those looking for a cheap alternative to the aforementioned expensive gels, Sanfor is offered. He has a similar action, it is in no way inferior to other more expensive brothers. The composition contains hypochlorites, sodium hydroxides, surfactants, chlorine salts. A violent reaction with water helps to dissolve organics and eliminate sources of stench. The gel copes with small blockages in 5 minutes. The aggressiveness of the drug requires taking precautions.
The concentrated gel is used for cleaning the sewage system. Removes corks, eliminates offensive odors, kills bacteria. The solution is safe for all types of pipes, it contains completely natural ingredients. The drug is completely soluble in water without harming the microflora of the drain system. Composition: A-tensides 5-15% (vegetable origin), soda 5-15%, water> 30%
Another Israeli representative from the Bagi firm. The gel removes tough blockages and unpleasant odors. It is used to prevent and eliminate the causes of blockage, the manufacturer guarantees a 100% result.I am pleased with the economical consumption: 110 ml per application (this is only half a glass of liquid). Dissolves organic and inorganic blockages, breaking through any "plugs" even in stagnant water. Safe for all types of pipes - plastic and metal, including corrugated siphons.
The tool removes blockages, regardless of complexity. The gel contains potassium hydroxide, sodium, chlorine, various additives that accelerate the chemical reaction. The manufacturer recommends keeping it for one hour after pouring the gel, but in the case when the problem is small, the reagent copes with the task much faster. Its cost is much cheaper than many products that are widely advertised. It can be used both for the prevention of blockages and in emergency situations.
Liquid products have been used for quite a long time to cleanse the sewer system. The composition poured into the drain enters all the knees and bends, penetrates into the fatty plaque on the surface and promotes its dissolution. Aggressive fluids were used back in the Soviet period and have not lost their popularity to this day. The good old proven remedy "Mole" does not disappear from sale. Affordable price allows you to successfully compete with analogues. When choosing inexpensive cleaning fluids, you need to carefully dose the preparations. Often, the composition contains highly active and aggressive chemical compounds, they can harm the plastic drain system or spoil the plumbing gaskets made of polymer materials. Liquids are more suitable for cleaning old cast iron pipes. Modern materials are less durable and may not withstand prolonged exposure. The main advantage of liquid products is the cleaning of a large piece of the pipeline. They remove local plugs and deposits located far from the drain in the depth of the pipe. This improves the performance of the plumbing system.
This is a well-known and proven tool of Russian production. The active substances that make up the liquid (sodium and potassium hydroxides, acetic acid) have a destructive effect on proteins and fats of both vegetable and animal origin. The drug is not inferior to foreign analogues and has an attractive price. The chemical reagent lasts 2-3 hours. Simple and cheap, never doubted to be reliable, it removes any organic deposits thanks to its powerful formula.
High performance liquid, removes all kinds of blockages. The product can be used for all types of metal and plastic pipes, it does not contain chlorine. Regular use of a liquid prophylactic agent will save the pipes from subsequent clogging and stench formation.
A high alkali content requires compliance with protective measures: use of gloves, masks, protection from children, separate storage from food. Keep container tightly sealed with liquid in a cool place. At sub-zero temperatures, the liquid freezes, but when defrosting, it retains its former properties.
Nobody canceled mechanical methods. They are sometimes very powerful. The procedure can be performed using one of the following tools:
Small blockages at shallow depths can be removed with an ordinary brush. If the blockage is further, and the length of the brush is not enough, then you can attach a flexible rod to it and use such a homemade device to break through the blockage.
Soda and vinegar will effectively and carefully solve the task. Many people like this method because it does not harm the inside of the sewer pipe. Take 1 cup of baking soda and about the same amount of vinegar. First, soda is poured into the drain, vinegar is poured on top.
In this state, the sewer hole is left for 2-3 hours, then the drain is flushed with several liters of hot water. That's all: the sewers will be clean.
Sometimes a regular lemon can save pipes. To do this, squeeze the juice of fresh lemons into the drain and leave the pipe without running water for at least an hour.
The use of folk methods is equally effective for clogging and for prevention.
Solving blockage problems with a large assortment of household chemicals is not such a difficult task. When choosing, you need to take into account the condition and material of the pipes, as well as the degree of clogging. The easiest option is liquids. They have been proven to be safe and gentle. The speed suffers a little. Gel-like products give a great effect. They are easy to use. "Heavy artillery" includes pellets. Convenience of storage is the main advantage of powders and solids.
For severe contamination, chemicals of "emergency" action are suitable, in mild cases it is better to choose a product with a lower concentration of the active substance. Safety cannot be neglected, it is always important to remember about protective equipment. Airing the room, excluding access to drugs for children and pets will save you trouble.