Rating of the best remedies for blooming pool water for 2024

Pools in summer cottages and private household plots have recently become very popular. Mainly due to the availability of inflatable swimming tanks in stores. With the arrival of the warm season, many people face the question: how to make sure that water does not bloom in the pool? There is not always time and energy to constantly maintain ideal water purity. When blooming, the water turns green and has a characteristic unpleasant odor. In order to start using any means, you need to understand the main root cause of flowering.

Water can bloom for the following reasons:

1. Single-celled microorganisms, namely algae. They reproduce especially quickly in warm water. During the summer months, the outdoor pool is just the perfect environment for them to bloom. They are able to live in water for a long time. Unfortunately, not every filter has a dispute delay mechanism. In cases where there is chlorinated water in the reservoirs, algae multiply much more slowly, and sometimes even die at the initial stage of reproduction. To fill the reservoir, it is better not to use well water, since it already contains spores of microorganisms. Therefore, when filling the reservoir with such water, it will turn green within the first few days. Indoor pools also have the potential for algae to enter the water, but this is much lower.
2. Filtration quality. Basically, the water begins to bloom due to the fact that it is idle for a long time and does not pass filtration. It is important to ensure that the filter is not clogged. It is in cleaning systems that spores often begin to multiply.
3. Chemical substances. Chlorination is often used for water purification. With an insufficient amount of bleach in the water, it begins to bloom. The correct level that prevents spores from multiplying is Ph 7.2. If it is lower, then the water begins to bloom.
4. The presence of a large amount of iron in the water. In this case, the water is slightly green, but does not have a characteristic odor. In such a situation, you can change the level of alkaline balance, as well as remove iron with the help of coagulants.

To combat flowering, you can use simple folk remedies, technical devices, as well as special additives to remove and prevent greening of water. It is also worth noting that the correct ph balance must be established in the water before starting to clean the pool. When buying a remedy against water bloom, you need to consider the following selection criteria: health safety, rating, reviews, manufacturer, release form, cost. We will consider in this article which remedy is better to buy, what to look for and how to avoid a mistake when choosing drugs.

A few easy options for cleaning your pool

Filter installation

Water filters remove coarse particles and debris from the tanks. Only a more expensive filtration system can protect from small, just-born spores. Typically, expensive filters require expensive, thorough, and ongoing personal care. In the case of an outdoor pool, no filter will guarantee that the water will not bloom, since microorganisms enter the tank directly from the street. The cost of the filter starts from 2,000-15,000 rubles.

• No need to waste energy and clean the reservoir mechanically;
• Cleaning of heavier and larger particles.

• There is no guarantee that a purchased filter will prevent blooming;
• Additional costs for electricity;
• High price.

Water ionization

A low voltage current is introduced into the tank. It gives off copper ions to water, which adversely affects the reproduction of algae. The cost of an ionizer for pools starts from 80,000 to 200,000 rubles.

• High probability of effective removal of greenery.

• We need special tools;
• The need to install a cleaning system;
• The high cost of the device.

Water change

The most effective way to purify pool water. The old water is drained and the reservoir is filled with new and fresh liquid. If the pool is inflatable, special pumps and buckets are used, as well as hoses for filling the pool. In order not to make the replacement constantly, it is better to use tap water. Despite the fact that spores enter it from the street, initially they are not in it, which means that the water will stand clean longer.

• Fresh and clean liquid;
• No additional devices needed;
• With regular replacement, there is no need to buy chemicals.

• A lot of time for descent and set;
• Fixed financial costs for water supply.

Mechanical cleaning

The easiest and cheapest way to filter. Blossoms form on the walls of the pool with the help of special devices, they can be removed. To begin with, the water is drained, then mechanical cleaning is carried out using cleaning agents, after which the tank needs to stand a little without water. If the pool is inflatable, you need to be careful when choosing chemicals, as they can damage the material.

• You can clean it yourself.

• Serious physical activity;
• The cleaning process takes a long time;
• Water costs with constant draining and collection.

Copper sulfate

Quite an effective way of water purification. The chemical composition performs the following functions: destroys algae, cleans the liquid from fungi and spores, removes all growths from the walls of the pool. Vitriol is used directly in a diluted form. Proportion: 0.9 grams of powder per 1000 liters of water. A greater cleaning effect will be given by table salt, which can be added to the solution. 4: 1 relative chemical salt is added. To prevent the water from blooming, the resulting liquid is mixed with peat and lowered to the bottom of the pool in bags. The presence of table salt will significantly affect the clarity of the water, which becomes crystal clear after using the solution. The price of the substance does not reach 500 rubles per kilogram.

• Low cost of the chemical;
• High efficiency of the method;
• There is no need to flush water, which significantly reduces the payment for water supply.

• Causes skin burns if misused;
• You need to independently calculate the proportions;
• Does not remove bacteria and large, viable microorganisms.

Pool blackout

The more sunny the color, the faster and stronger the algae bloom in the liquid. Therefore, when planning the construction of a pool, it is better to take into account, first of all, places in the shade. Or purchase special fabrics to darken the tank. In order to prevent active blooming, it is sufficient that the pool is darkened for up to 5 hours a day.

• A simple way that does not require additional costs;
• You do not need to use any chemicals.

• Shading the pool or covering it significantly affects the warmth of the water.

In addition to folk and technical means for cleaning, there are also chemical and biological additives, which, when added to water, also effectively cope with flowering. By their nature, they come in the form of tablets, as well as liquid cleaners. At the moment, cleansing preparations are used not only based on chlorine, but also various modern formulations that clean water much faster and better. After using any disinfectant, you should not use the pool earlier than 10-12 hours. Below are the most popular and effective cleaning products according to home pool owners.

Water purification tablets

Longafort

A disinfectant with a chlorine content of 85%. The chemical has antimicrobial effect and kills a large number of microbial bacteria. When it gets into a liquid, it begins to act in 20 minutes. It is recommended to use the drug once every 1-1.5 weeks. An average dosage of 20-25 g is calculated for a tank area of ​​3 * 3 meters. Shelf life of tablets: 24 months. The average cost starts from 800 rubles, depending on the number of tablets.

• The water becomes clear and transparent;
• Economical consumption;
• Can be used both at home and in public pools.

• Does not always cope with algae;
• High price;
• Toxic to others.

Chlorgranulat

The main task of the drug is to destroy bacteria, fungi, viruses, spores and other microorganisms. The tablet contains 55% chlorine. Apply the product immediately after the tank has been completely filled with water. The required dose for emergency use is 150 g. 11 cubes. The standard dose is 75 grams for the same amount of liquid. The agent must initially be diluted in a separate container, after which the drug can be applied to the walls of the tank. It is forbidden to use in its pure form, as the product can be a reservoir, in particular inflatable pools. Average price: 1300 rubles for 5 kilograms.

• Fully soluble in water;
• Meets the requirements of GOST.

• Daily use of tablets;
• Difficulty with purchasing in the Russian Federation.

Crystal pool

The product consists of sodium chloride. At the moment, Crystal Pool is considered the most effective tool in customer reviews. When immersed in water, each tablet causes shock chlorination and complete disinfection of the liquid. With weekly use, the microflora of the water improves and all bacteria die. The substance is produced in two forms: fast-acting 1 tablet 20 grams (60% chlorine) and slow-acting 1 capsule 200 grams (85% active chlorine). On average, 5 tablets are required for every 10 cubes. The average price starts from 700 rubles per 1 kilogram.

• Clear water after application;
• Dissolve in liquid without residue;
• Low cost;
• Dissolves quickly;
• Can be used in hot water and in the sun;
• Suitable for both small and large tanks.

• Toxic when used.

MAK-4 Intex system

It is a float with tablets for cleaning liquid inside. You can use the tablets one at a time, which will give an effect up to 8-10 days, or two at once, the water will remain crystal clear for two weeks. After the tablets are completely dissolved, they must be replaced with new ones. The agent is used at the rate of two tablets per 30 cubic meters of water. The cost of the package is 1000 rubles for two tablets.

• An effective remedy for removing water blooms.

• There are only two tablets in the package;
• High price.

Multiect 5 in 1

Means for removing and preventing the growth of algae, fungi and microorganisms. The tablets are dipped directly into the pool filter, which must first be cleaned. The filter should be washed in the "backwash" mode. With tablets, the pump must run for at least 5 hours.Approximate dose 1 tablet 200 g. by 25 cubic meters of water. It is necessary to apply the product on a weekly basis. The average cost for 1 kilogram is 1500 rubles.

• The water is crystal clear after using the product;

• Incompatible with other drugs;
• Cannot be used for shock water treatment.

Liquid anti-blooming agents

Froggy

A product based on organic chlorine, which contains cialuronic acid. The main task of the acid is to protect chlorine from sunlight. When using the drug, all pathogenic microflora, fungi, algae and bacteria are destroyed. It is worth carrying out the procedure once every 10 days. Recommended for use: after rains, when an unpleasant odor appears in the water, when it blooms, as well as during the initial appearance of turbidity in the water. The average cost starts from 3,500 rubles.

• Dissolves quickly;
• Economical to use;
• Supports natural alkaline balance.

• High price;
• You can buy the product only through the website.

Algicide

The most effective additive to combat water bloom. When it gets into a liquid, the algicide dissolves the cell membrane and completely disinfects the water. The product can be used either alone or in combination with other cleaning products. Algicide can be used: in an empty tank, even before water is collected, in a clean liquid, and also when the flowering process has begun to actively gain momentum. The price starts from 380 rubles per 1 liter.

• Ease of use;
• Low price.

• When exposed to sunlight, the algicide ceases to act.

Hydrogen peroxide LEGA

A highly concentrated preparation that, when it gets into a liquid, makes it sterile. Purification occurs due to the splitting of hydrogen into active oxygen, which in turn starts the oxidation process. The concentration of peroxide is 37% and 60%. The recommended dose for use is at a concentration of 37% 900 ml per 1 cubic meter, at 60% 450 ml for the same volume of water. It is recommended to repeat disinfection after 10-14 days. Average cost: 1400 rubles.

• Completely stops the process of water blooming;
• Convenient to use;
• Suitable for complete cleaning;
• Does not cause allergies;
• Can be used in children's pools.

• Skin contact may result in burns.

AquaDoctor

Professional German means for cleaning reservoirs. Suitable for any kind of tank. The product contains chlorine and active oxygen. When released into water, the preparation not only removes the liquid from algae, but also makes the water crystal clear. AquaDoctor should be used in the following proportions: 20 ml of product per 1 cubic meter of water. The procedure must be repeated every 7 days. In case of heavy contamination, the dosage should be doubled. Pouring the drug directly into the pool is strictly prohibited. You must first dilute it with water in a basin or bucket, and then pour it into the tank. The cost starts from 230 rubles per liter.

• Excellent quality;
• Availability;
• Low price.

• Not identified.

The pool should be cleaned on a regular basis. Not always expensive cleaning products will clean water well and effectively. A clean pool is not only beautiful, but also health benefits of its owners. When choosing a product, you need to take into account the ratio of "cost and quality".