Rating of the best brake pads in 2024

After a car has traveled a large number of kilometers, minor repairs of parts subject to regular wear and tear are provided. The safety of drivers and passengers depends on the parts that create braking acceleration due to interaction with the wheel surface. The variety of brake shoes and pads sold in the car market makes it easy to find the right part for both driving style and price.

Criterias of choice

What to look for and how not to make a mistake when choosing the necessary element for the brake system. In each individual case, the selection of the brake pad should be based on some technical parameters.

1. Heat transfer. The optimal temperature regime for the operation of the pads of old domestic cars is +280 - +360 degrees. For sports vehicles or modernized foreign cars with good heat dissipation, this figure reaches +950 degrees. The main working element of the braking system, designed for driving sports cars, is not recommended for installation in cars that make regular trips around the city. Since in this case the pads will not be able to show their optimal properties.
2. The main characteristic of friction. A very important criterion, since in the case of insufficient heating of the brake pad, the friction coefficient decreases. Because of this feature, the brake pads will wear out very quickly. Standard "shoes" have a coefficient of 0.3 - 0.6. The increased digital value of the pad indicates better braking.

Types of plates

Before you buy the best brake element for your car, it is worth learning about the existing types of pads. You should pay attention to the classification of the spare part by its type. In accordance with the material of manufacture, components are divided into four types:

Semi-metallic

This consumable of the brake system contains from thirty to sixty percent metal. In most cases, the manufacturer uses iron powder, graphite and copper. Synthetic substances are additional elements. In the manufacture of such linings, a special device is often used to modify the operation of the machine. The modifier allows you to successfully connect all the components of the "shoe".

The main advantage of such parts is optimal heat transfer.However, they wear out faster, perform poorly at low temperatures, and have an increased noise level when the brakes are applied. Also, such parts intensively wear out the brake disc. The average price for such products ranges from $ 14 to $ 25 and is determined by the manufacturer himself.

Organic

These consumables are made of fibers and organic matter held together with resin. In the manufacture are used: glass, kevlar, carbon and high quality rubber materials. Buying a similar product, you can count on the soft work of the parts. In addition, increased noise can be avoided while driving.

The disadvantage of such pads is poor braking when moisture gets into the internal elements and very fast abrasion. In addition, organic "shoes" often create increased dust levels, causing damage to ventilated discs. The price of the product ranges from ten to twenty dollars.

Metal

In the manufacture of such consumables, it is possible to add metal in full or in part. The cost of these products is much higher than that of pads made from other materials. However, the spare parts are of perfect quality and long service life. The main difference between the metal "shoes" is the base of steel or copper. Installing such pads improves brake performance and heat exchange with the road surface.

The long-lasting pads are very durable and guarantee the driver an optimal level of driving efficiency. A small minus of the parts is that there is a risk of damage from the disc. The average cost of spare parts ranges from forty to fifty dollars. Titanium consumables are slightly more expensive.

Ceramic

These consumables are the most ideal in terms of quality, but they have a considerable cost. They are distinguished by high quality of braking, resistance to high temperatures, preservation of the original characteristics even when moisture enters the structure. It is made of ceramic fibers and non-ferrous metal. In some models, the manufacturer adds a small percentage of steel or nickel. These pads work well with brake discs, do not emit a lot of dust and do not overheat. The average price for ceramic parts starts at $ 100. The exact prices depend on the brand and brand of the vehicle on which the parts will be installed.

When choosing a material for consumables, it is worth deciding on the selection of spare parts, taking into account:

• whether riding in highlands will be carried out;
• the climate of the region of residence;
• driving style;
• brake squeak tolerance;
• use of trailers;
• the presence of holes and deep puddles on the roadways in the cold season.

Top manufacturers

A lot of Japanese, German, American Italian and other companies are engaged in the production of brake pads. The Russian automotive market offers buyers only a small part of the parts produced worldwide. However, even in the presented pads, it is quite easy for an inexperienced driver to get confused. Therefore, it is worth knowing about popular models and the best manufacturing firms in the opinion of buyers.

Ferodo

Many motorists trust the products of this company. Today, the company supplies high-quality brake components not only to leading vehicle manufacturers, but also to the aftermarket. It supplies original spare parts for eight of the most popular European vehicles.

• quality;
• a small percentage of wear during operation;
• a wide range of goods.

• in some cases, quick dusting of the ventilated discs when installing the brake calipers.

Hankook FRIXA

Korean manufacturer that produces disc and drum brake pads mainly for Korean vehicles. However, they are also suitable for Russian VAZ cars with the lining of special restraining rings. The most popular is the Frixa S1 range of rubbers with anti-squeak plates.According to the reviews of car owners who have installed pads from this company, spare parts last quite a long time and have a low price.

• a small percentage of parts wear;
• low price for products;
• smooth braking when installing parts.

• a small whistle after the car has passed the first few thousand kilometers.

Bosch

A German brand that is very popular all over the world. Produces spare parts for disc and drum types of brakes not only for foreign cars, but also for Japanese cars from Asia, domestic cars. The main working components of the braking system from the manufacturer confidently slow down, do not creak, serve faithfully for tens of thousands of kilometers.

• quality;
• reliability;
• long operational life.

• frequent sale of fakes;
• high price of the product.

Description and characteristics of quality inexpensive brake pads

The most budgetary gaskets are considered to be parts made for third world countries. Since production in these countries is greatly simplified, the quality of manufactured products is not of high quality. However, among such goods, decent spare parts are often found. In addition, such a support has a budget price.

KRAFT Chevrolet Lacetti / Daewoo Nubira, Leganza

Disc pads for European and Japanese cars with increased resource and brake disc preservation technology. Easily tolerate a ragged cycle, providing the driver with excellent braking in all operating conditions. Parts are heat treated on special equipment. This guarantees the formation of the disc-saving properties of the friction lining. Average price: from 450 rubles per set.

• disk-saving qualities;
• affordable price;
• excellent brake performance under all conditions.

• frequent sale of fakes.

Brake shoes for 2108, 2109, 21099 from VATI

A Russian brand that produces environmentally friendly brake shoes for domestic cars: Lada Granta, Kalina, Samara and others. The popularity of shoe models from the manufacturer is confirmed by Russian and Ukrainian motorists. Users note the quiet operation of parts, good wear resistance. They are distinguished by confident braking at any temperature load. Average price: from 700 rubles per set.

• lack of squeak;
• silent work;
• long work of the support.

• not a large selection of pads.

Fr brake shoes without sensor from MARKON front

A working tool that creates braking acceleration for both foreign cars and domestic vehicles. It has good heat dissipation, which is a big plus for the operation of car rims. Great for safe city driving where the brakes are used a lot. They cope well with overheating, have a good coefficient of friction. However, the hardness of the friction linings is insufficient, creating a large amount of dust. Average price: from 750 rubles.

• high-quality heat removal in friction areas;
• low price;
• large model range.

• in some cases, squeak even after lapping;
• not a long operational period.

Pads from ROSDOT for GAZ rear

Parts made from the best domestic and foreign materials. Fully meet the standards of the UN EAC. Suitable for both driving in urban environments and for driving in mountainous areas. The stupor works almost silently thanks to a special layer of mastic in the friction element. Differs in: reliability during braking, stability of the coefficient of friction, increased service life and careful attitude to brake discs. Average price: from 880 rubles.

• long service life;
• acoustic comfort;
• quality.

• according to some motorists, too frequent replacement of elements.

Review and rating of the most popular expensive brake pads

The best and most reliable brake elements are considered to be working components from German, Italian and American manufacturers. Spare parts are distinguished by: decent quality, smooth confident braking, long service life, no creaking sounds. How much does a high-quality and reliable caliper cost? The price of a similar product in some cases reaches more than a hundred dollars per set. Therefore, there is a possibility of acquiring a fake. You can distinguish a fake from the original using a special barcode, which can be viewed on the manufacturer's official website.

FERODO TARGET brake pads for Nissan Almera

Parts from a British manufacturer, suitable for foreign passenger cars that are operated with a relaxed driving style. The best pads for track mode. They have a high coefficient of friction, are durable and almost independent of temperature. They are distinguished by gentle qualities in relation to brake discs, emit little dust and rarely creak. Average price: from 1100 rubles per set.

• the rare presence of creaking sounds;
• minimal impact on disc wear;
• affordable cost.

• not found.

Pads front HYUNDAI SOLARIS, KIA RIO III GDB3548 TRW GDB3548

Spare parts for the braking system, designed for active and dynamic driving. They are distinguished by a high coefficient of wear, ideally working in tandem with brake discs. The estimated service life, depending on the driving style, is 35,000 km - 52,000 km. The pad has an innovative silicone coating that improves contact between the brake disc and the working component of the brake system. This feature allows virtually no “lapping” of the pads after replacement. Average price: from 1650 rubles.

• quality and reliability from a German manufacturer;
• large lineup;
• silicone coated caliper.

• frequent sale of fakes.

Sangsin Brake HP1399 premium kevlar

Premium class pads used on Hyundai Solaris, Toyota, Honda cars. The products are suitable for any vehicle operating conditions. It is used for general roads without extreme driving conditions. Distinctive features of the pads are low noise during operation, ensuring soft confident braking, high aesthetic and environmental qualities. They do not leave a black spot on the surface of the brake disc, do not form dust. The manufacturer of the pads stated that in the urban cycle on the machine, the parts will wear out after 38000-48000 kilometers without wearing out the disc. Average price: from 2600 rubles per set.

• silent work;
• quality and reliability;
• soft and confident braking;
• long service life.

• relatively high price.

Disc pads rear Opel Astra, Chevrolet Cruze 1.4-1.8 / 1.3

Premium caliper that guarantees high-quality braking at all speeds, as well as high-temperature operation. The innovative composition of the mixture of the working surface of the elements provides the best coefficient of friction. Thanks to a special coating, it is characterized by quiet operation and no crunching. The approximate mileage declared by the German manufacturer is 52,000-72,000 kilometers. The composition of the material from which the working components for the brake system are made include titanium and chrome alloys. Unique ceramic parts are produced only using time-tested methods and technologies. Average price: from 2700 rubles.

• German quality and reliability;
• manufacturing using innovative technologies;
• use of titanium alloys.

• high price;
• frequent sale of fakes.

Front brake pads HANKOOK FRIXA S1 for FORD, MAZDA, VOLVO

Premium-class brake shoes for many popular foreign cars from a South Korean company leading in the production of such elements. They feature improved braking performance, reduced noise levels and stable operation at all temperatures. They do not contain harmful metals in their basic composition, therefore they are environmentally friendly. The manufacturer added Kevlar fibers to the friction linings. This improves the wear resistance and durability of the brake elements. Average price: from 5300 rubles.

• quality;
• durability;
• wear resistance.

• high price.

In order to select the correct working components of the braking system, you need to clearly know for which driving style they will be used and on which named car they will be installed. And when buying brake pads, remember that you should not be led at a cheap price. Reduced rates may indicate the item is a fake.