Ranking of the best Wi-Fi signal boosters for 2024

Over time, old buildings and structures are modernized, completed, rebuilt, due to which the walls become thicker, and the rooms - more. A regular Wi-Fi router is not able to cope with the indicated functions on its own. There are several options for solving the problem: buy and install auxiliary equipment of the same type (with the subsequent laying of an Internet cable) or connect an amplifier that will cover the dead zones. The second option will cost much less than the first.

Which one is better to buy

A Wi-Fi signal booster is also referred to as a repeater. The principle of operation is similar to network hubs. However, the units should not be confused. Using a repeater, you can significantly reduce the transmission delay of the signal emitted by the router. Among the designated functionality, special attention should be paid to the following aspects:

1. Management of other networks.
2. Fallback protocol support.
3. Auto-segmentation of ports.
4. Amplification of the existing signal.

Before you buy such a device, it is recommended that you familiarize yourself with the information regarding what they are. Particular attention is paid to the data transfer standards that they support. It is on this aspect that the ability to connect auxiliary devices to the repeater and the ability to connect to it depend. Experts advise to give preference to equipment that works according to the 802.11-n and 802.11-ac standards. According to buyers, the indicator of the speed with which data transfer is carried out also deserves attention. At home, this indicator is not critical, however, for offices, you should choose the best model.

It is necessary to pay attention to the fact that the indicator of the data transfer rate declared by the manufacturer in practice is significantly lower. This statement applies not only to products from Aliexpress, but also to products of European and Russian origin. The optimal rate is 300 Mbps and above.

We also advise you to pay attention to the signal transmission range. The area of ​​Internet coverage directly depends on this indicator. In each model, this indicator will be individual. In addition, the actual range will be reduced by the walls. Both their thickness and quantity are taken into account. The thicker the partition, the more significant the losses will be and the weaker the transmitted signal will be. There is a category of repeaters on the market that can only be docked with products of the same brand.

When purchasing devices of a generic type, set up should be done before starting work. It is recommended to give preference to units that can be controlled via a laptop or mobile application. Thus, it is possible to receive information of any type regarding the operation of the Internet.

How not to make mistakes when choosing

Before choosing such a device, you should consider the basic selection criteria that do not apply to routers and routers. The repeater must be able to cover the entire area and operate without interruption. A properly selected device will not only work flawlessly, but will also cover the required area of ​​offices or a private house. It is worth noting that this option is also considered acceptable for giving, as evidenced by numerous photos on the network. The selection should be based on the parameters below.

Parameters	Description
Available transmitter power	Each amplifier, without exception, operates on the basis of a built-in type transmitter. The coverage area will directly depend on this indicator. Power of 20 dB is enough for a small apartment. The maximum allowable factor is 23 dB. The point is that according to the current legislation of the Russian Federation, all devices whose range exceeds this mark must be subject to forced registration. Also, the figure indicated by the manufacturer affects the power of the transmitted signal - how much it will improve after connecting to the main router. The coefficient of popular models can reach 50 dB, which guarantees a reliable and stable network.
Top manufacturers	Repeaters are often manufactured by the same companies as network equipment distributors. However, there are exceptions. Based on numerous reviews, reviews and ratings, the following brands deserve unconditional trust: 1. Keenetic. 2. Vegatel. 3. Xiaomi. 4. D-Link. 5. ZyXel. 6. Tenda. 7. Locus. 8. TP-LINK. Their products are characterized as the highest quality. If on the front panel a person sees incomprehensible and unfamiliar icons from China, then it is better to pass by such a product. Chinese-made goods can be of high quality, but the risk of making a mistake when choosing or buying a marriage is too high. Well-known brands have their own online stores that allow you to order products online.
Ranges	If the user wants to provide himself with superior speed, then in the selection process, special attention should be paid to designs with a mark of 5 GHz. This frequency is not used often, therefore it remains free, which has a positive effect on the speed of the Internet. However, it should be understood that the purchase of such a device will be justified only if other gadgets have access to it. If you are not sure about this issue, we advise you to give preference to two band models that can operate at different frequencies.
Antennas and their number	Such elements can be both external and internal. Their number can reach 8 antennas. The more they were installed, the more power the device has. Internal ones practically do not affect the final figure, but external ones allow the modem to reach the 5 dB mark. If possible, select models with external antennas. Otherwise, there must be three or more inline elements.
Device type	Conventionally, all designs can be divided into those that work only with Wi-Fi routers and cellular signal amplifiers (3G / 4G). The criterion is important and must be considered in the selection process. The specification is indicated in the product passport. There are also a number of devices on the market that can also distribute the Internet via Wi-Fi. The unit will operate on a SIM card, which you can install yourself. The operating principle of the models is different.
Protocol support	If we are talking about buying a cellular signal amplifier, then the unit must support communication standards such as 3G and 4G. It is these protocols that are currently responsible for accessing the World Wide Web. Reception will be noticeably higher with the LTE mark. 3G is also supported by budget models, but you should still check the specification before buying.

Which company is better to buy a Wi-Fi amplifier with a router function

Asus RP-AC68U

The perfect solution for both shops and offices. The declared data transfer rate is 1000 Mbps. The popular model is equipped with four antennas, which is a feature of the product. The undoubted advantage in favor of such a choice is the unusual appearance of the wireless installation, namely a stylish column of deep black color. This will allow the device to harmoniously fit into any environment.

Average price - 4500 rubles.

• design;
• power;
• specifications;
• material of manufacture;
• the ability to solve any problems of a modern user;
• the possibility of conducting the Internet to rooms in which laying wires is not possible;
• stable work;
• reception;
• operational period.

• not identified.

ZyXEL Keenetic Extra II

For many users, the price for this product seems overpriced, however, based on the declared functionality, this is not the case. Not every person can afford such an acquisition. The situation is different for shops and companies with spacious premises. A feature of the model is the ability to independently recognize the received signal by other gadgets. If necessary, the device will independently switch between ranges, based on the list of connected gadgets. Thanks to this, the device is classified as universal.

You can buy a new product at a price of 4000 rubles.

• 4 antennas that can significantly increase the coverage area;
• design;
• no backlash (build quality);
• reception;
• no interruptions in work;
• device management and traffic tracking through a mobile application;
• built-in torrent client;
• the ability to connect a hard drive;
• two-band distribution frequency;
• stable reception.

• in order to configure the modem, you should follow the step-by-step instructions, which will take a lot of time;
• price.

ZyXEL Keenetic Lite III

Router with amplifier function. It is in high demand among domestic consumers. An excellent choice if you have a multi-room apartment, where the coverage goes beyond the standard. Thus, it is possible to acquire wireless Internet in the most remote premises at no special cost. The speed declared by the manufacturer is 300 Mbit / s, which is considered a quite acceptable indicator.

The cost of an inexpensive device is 2200 rubles.

• price;
• design features;
• the declared speed is correct;
• independent connection;
• internal settings (mobile application);
• body materials;
• price / quality ratio;
• functional.

• not identified.

TP-LINK TL-WA860RE

The classic case is not able to surprise the modern user who is used to dealing with unusual design solutions. However, this aspect is more than compensated by the functionality declared by the manufacturer. The socket with which the device is equipped deserves special attention. This will not negatively affect the number of scarce sockets in the power grid. A one-of-a-kind unit that has been thought out to the smallest detail. The technicians have done their best to provide the user with the necessary amenities.

There is an RJ-45 jack that will allow you to connect to computers or TVs in Wi-Fi adapter mode. When connected to the network, the Internet is distributed. The declared data transfer rate is 300 Mbps. An excellent and economical solution for both a small office and a spacious apartment.

How much does the kit cost? The purchase will cost 2,100 rubles.

• built-in socket;
• equipment;
• ergonomics;
• functional;
• transmission speed;
• assembly;
• manufacturer's warranty;
• service maintenance.

• appearance;
• not identified.

Rating of quality Wi-Fi amplifiers for 2 antennas

Vegatel VT5-900E

It is this model that is perfect for professional activities. The device belongs to the advanced class. It has several protection stages and is distinguished by the stability of signal transmission. The system is housed in a robust metal case that is shockproof and waterproof. This makes it possible to use the router outdoors (street type). Gain control is carried out in both automatic and manual modes. Works with all known GSM standards.

Connection of two antennas is possible. One is directed towards the tower (37 dB), while the other is directed towards the phone (20 dB). The gain is quite high. It is used both in spacious country houses and office premises.

Cost - 1600 rubles.

• the possibility of manual adjustment;
• assembly;
• substantial coverage;
• support for various GSM standards;
• transmitters of acceptable power;
• 2 antennas can be connected additionally;
• reliability;
• protection of the case from moisture and mechanical stress;
• no glitches.

• price.

Tenda A18 with two external antennas

Our rating continues with an amplifier from a well-known brand, which is able to distribute the Internet simultaneously in several bands. The maximum speed indicator reaches 867 Mbps, but this is just a theory. Built-in antennas in the amount of two units can increase the indicator by 2 dB, due to which the coverage area significantly increases. The modem's own indicator is 16 dB, which is considered acceptable for a small one-story house or a two-room apartment.

The model got into the TOP largely due to the number of favorable reviews and the declared functionality. Internet port at 100 Mbps. It can also work as a full-fledged access point. The functionality allows the unit to be used in bridge mode. The interface is nice and straightforward. The dimensions are also compact: 80x48x58 mm.

Price - 2700 rubles.

• bridge mode;
• two antennas (external);
• LAN port at 100 Mbps;
• the declared speed is 867 Mbps;
• auxiliary transmitter at 16 dB;
• access point function;
• two working ranges.

• lack of decent reception at 5 GHz.

TP-LINK RE200 V1

A quality product from a world famous manufacturer. The ability to work with two ranges deserves special attention. There is also support for various Wi-Fi a / b / g / n / ac standards. The declared speed is 733 Mbps. is a theoretical indicator, in practice the coefficient is slightly lower. There is a built-in 20dB type transmitter which guarantees excellent transmission and signal stability. The installed antennas have a beneficial effect on the functionality of the device. Protected using the standard WPA2 protocol.

One of the best solutions for home use. The cylindrical design is available in white only. Lost reception or connection will be illuminated by the corresponding LEDs. There is also a 100 Mbps Internet port in the case. Can act as a bridge as a router. To configure, you need a web interface. Compact dimensions will allow you to place the device anywhere.

Price - 2100 rubles.

• three internal antennas;
• internet port;
• user-friendly interface;
• port with the possibility of installing a bridge (function);
• power of 20 dB;
• WPA2 protection;
• speed 733 Mbit / s;
• the possibility of using two frequencies;
• dimensions: 110x66x75 mm.

• extended networks are not saved.

TP-LINK TL-WA855RE

It should be noted that along with the design, the buyer receives a network cable that will allow cable connection to a laptop. In addition to the Quick Setup Guide, the manufacturer includes a warranty card. Compact adapter that plugs into a wall outlet. During the assembly process, high-strength plastic is used, which is not recommended to be dropped (the board is not protected). Air vents are located on the rear and side panels. This must be taken into account during installation to avoid overheating. The WPS button is on the top and is used to connect the host device.

Price - 1300 rubles.

• wide coverage;
• acceptable transmission speed;
• stability of work;
• manufacturer's warranty;
• configuration via WPS;
• classic design;
• transmission speed.

• not identified.

Best Wi-Fi boosters with WPS

TP-LINK RE205

It is a neat white plastic box. The bezel is glossy, while the rest of the elements are matte. Repeater dimensions: 80x78x77 mm. Fixed-type antennas in the popular model move exclusively vertically. However, in most cases this will not be a problem. The minimum number of buttons is used for control. The WPS mode key is located separately. The internet port can be seen in the immediate vicinity. There are two working ranges. The blue light indicates that the device is working normally. Red blinking - reception is weak.

Cost - 2000 rubles.

• user-friendly interface;
• control via a mobile application;
• two working ranges;
• great welcome;
• functional;
• no failures;
• ease of customization;
• status indicators;
• design;
• ergonomics.

• not identified.

Tenda a9

A modern device to improve Wi-Fi reception. A home network of 220 V is used for power. Physical data 802.11 b / g / n, which is considered outdated parameters, which remain relevant to this day. Working frequency 2.4 GHz. Due to two external antennas, the device delivers a speed of 300 Mbit / s. However, the indicator should be divided by two, which is also considered an acceptable ratio. Protection is carried out according to the WPA2, WPA and WEP standards. A perfect solution for a three-room apartment in an old building or a small office.

Cost - 1200 rubles.

• appearance;
• protection of basic protocols;
• acceptable speed;
• reliability;
• build quality;
• ergonomics.

• insufficient power in comparison with similar devices in this price segment.

Netis E1 +

The equipment looks like a bar of soap and has the appropriate dimensions. Thus, the device can be positioned almost anywhere. It should be noted that the antennas of the router are located inside. Works with 802.11 b / g / n standards, and delivers speeds up to 300 Mbps. In practice, the figure is much lower. A regular household outlet is used for power. A special feature is the presence of a LAN port. The user, if desired, can switch to the RangeExtrnder mode, which turns the amplifier into a full-fledged router. With the appropriate cable, it becomes possible to connect the unit to TVs.

Cost - 750 rubles.

• TravelRouter mode will transmit the Internet over Wi-Fi using an Internet wire;
• universal type device;
• acceptable price;
• compact dimensions;
• built-in antennas;
• standard protection of protocols.

• low power.

Rating of the best Wi-Fi boosters with data transfer rates up to 300 Mbps

D-link DCH-M225 with audio port

Device with compact dimensions: 54x42x56 mm. Power is supplied from a 220 V network. There are two antennas inside the case, which guarantee stable data transmission. It works only on one frequency, which is sufficient in most cases. The declared speed is 300 Mbps. Standard protocol protection (WPA2). Self-configuration is allowed through an intuitive interface.It should be noted that there is a standard 3.5 mm jack, which is used to connect speakers. The feature is rare, but necessary. For the manufacture of the case, white plastic is used.

Price - 2000 rubles.

• two built-in antennas;
• convenient and intuitive interface;
• good coverage;
• the possibility of self-configuration;
• 3.5 mm jack;
• 2.4 GHz transmitter;
• compact dimensions;
• appearance;
• ergonomics.

• the real speed indicator differs significantly from that declared by the manufacturer.

Xiaomi Mi Wi-Fi Amplifier 2

A budget class repeater that is not equipped with auxiliary functionality. It is characterized by a stable signal. The model got into our rating because the modern buyer gets a really high-quality and reliable device for a more than moderate fee. If all the necessary conditions are met, the adapter delivers 300 Mbps, which corresponds to the 802.11-n standard. The transmitted digital signal is transmitted in the form of waves, which are intercepted by the device and amplified. This is how it works. The amplifier will perform the designated tasks exclusively on standard purity. It is allowed to connect a number of outdated devices. To set up, you need a smartphone and a proprietary application.

Cost - 800 rubles.

• WPA2 protection;
• operating range 2.4 GHz;
• 802.11-n standard transmitter;
• branded ecosystem;
• speed of 300 Mbit / s;
• powered by 220 V home network;
• optimum power transmitter;
• stability of work;
• setting from a phone (smartphone or tablet);
• compact dimensions.

• the complexity of the first setup.

Mercusys MW300RE

Cute bunny - this is what modern users call a modem. This nickname is due to the presence of antennas that resemble ears. The coverage area is wide, and the data transfer rate reaches 300 Mbps. There is a separate button to create a fast and efficient connection. The reception level has an LED indicator that is illuminated. To connect, a standard 220 V network is used. However, the plug is made in such a way that it will not be possible to connect anything next to it. The settings are saved even after turning off the light.

Price - 1100 rubles.

• self-tuning;
• appearance;
• compact dimensions;
• saving the entered parameters after turning off the light;
• cost;
• stability of work;
• proprietary shell.

• power is sufficient only for home use.

We strengthen the signal from the router ourselves

Such a device is extremely useful for both home and business. However, if there is not enough money to buy such a device, then you can use some life hacks regarding creating a Wi-Fi amplifier with your own hands.

Set power to maximum

Some designs allow you to set this indicator manually. You can reach the function through the advanced settings menu. By default, the system raises this indicator to 100%. However, the parameters can accidentally get lost, so it would not hurt to check them from time to time.

Correct Router Placement

In most cases, a person seeks to install the router as far away from prying eyes as possible. We are talking about the most remote rooms and the hallway. This choice is obvious, because there is no need to stretch wires throughout the apartment. However, the signal transmission speed will be severely affected. The room chosen for installation must be equidistant (located in the center of the house). If you plan to use the Internet in only one room, then it would be more correct to install the router there. Then the repeater is not needed either.

Special applications can help you when choosing an installation location. With their help, the assessment of living space, the degree of signal transmission through the walls is carried out. The system itself will show the optimal installation location and provide the user with useful tips.

The firmware needs to be updated

The manufacturer's website contains all the necessary information regarding this issue. If there is a low speed from the first days of the router's operation, then most likely the problem is in the firmware. New software can fix the problem.

Changing the working channel

If an old router is installed that does not know about the existence of the 5 GHz band, then it works from the standard 2.4 GHz. There are only 13 channels, and the user will have to choose the least loaded one from the attached list. A special application (free) is used for the assessment. The extreme channels should not be connected, since they are the weakest, based on statistics. The apartments have high-speed internet, so the availability of free channels is questionable.

If nothing has changed

In this case, experts advise purchasing new router... Because even the most expensive amplifier can only amplify the existing signal, but not revive it from scratch.

Conclusion

To increase the range of the Wi-Fi signal, a repeater is used, which is also called a repeater or amplifier. This is often the most effective way to solve blind spot problems in both offices and living quarters. There are many reasons for such difficulties, however, the signal is often lost in thick walls or interrupted by neighbors. The main task of the repeater is to receive the signal from the router, amplify it and transmit it over a certain distance. In essence, the existing signal is relayed.