Rating of the best vibratory plates for 2024

Vibratory plates are used to seal various surfaces. Units are classified by the type of fuel used, which will act as the main source of energy. There are electric, diesel and gasoline installations. Based on their size, they are divided into heavy, medium and light. The total weight will be 45-450 kg.

What is it and what are

Before starting construction work, preliminary surface preparation and compaction of bulk materials are required. These can be:

Chernozem	Gravel	Crushed stone
Clay	Asphalt	Paving stones
Paving slabs	Sand	Other materials

Lightweight products are used to compact the soil during landscaping and densely laying paving slabs. Mediums are able to cope with any task, so they are classified as universal attitudes. It is these models that are in high demand and are considered in demand in the modern market. Heavy Vibratory Plates are classified as professional equipment that is used for laying foundations, paving stones, sidewalks and road construction. Thus, it is possible to improve air permeability and fill the existing voids. The bearing properties of the soil are increased.

If the working surface is not properly prepared, then as a result, the destruction of the coating, foundation and other troubles is possible. By means of a vibrating plate, it is possible to uniformly compact the working surface. It is used on construction sites and places where the use of massive equipment is not possible or advisable.

Among such cases:

1. Plot with a slope.
2. Small playground.
3. Removing holes and potholes in the road surface.
4. Installation of paving slabs or paving stones.

The best manufacturers of vibrating plates with gasoline drive

Low-cost designs with clearly defined functionality. They are in high demand, since their cost is significantly lower than similar designs with a diesel engine. They are not tied to a single power source, so they can move freely throughout the construction site. These functions can be handled both in heat and frost. Among the main mistakes in the choice is the presence of significant noise and an insignificant weight of devices. According to buyers, these factors will not allow solving certain problems.

CHAMPION PC5431F

One of the best gasoline-type vibrating plates. Belongs to the category of linear. The description indicates a four-stroke engine with a capacity of 2.3 hp. The declared impact force is 8.2 kN.The design is not suitable for professional work, however, for infrequent or one-time use, this option is considered optimal. The popular model can be used both for laying yard tiles and for minor repairs. The manufacturer declared the vibration frequency - 5140 beats per minute. Sealing is carried out at a depth of 20 cm. High-strength plastic is used for the manufacture of the case, which guarantees the protection of individual mechanisms, which are afraid of the impact of small stones and rubble.

Can be purchased at a price of 27,000 rubles.

• dust protection;
• comfortable handle (height adjustable);
• sufficiently accurate oil gauge;
• depreciation system, due to which the wear of individual components is reduced;
• operational period.

• a lot of noise;
• light weight (50 kg).

Elitech HTP 60 BVL

A reliable and inexpensive tool equipped with a four-stroke engine. Centrifugal force - 10.5 kN, with a power of 6.5 hp. The structure is equipped with wheels that can be screwed on if necessary. Thus, the device becomes more mobile and can be moved around the construction site. The ergonomic handles can be folded and unfolded for easy transport and storage. An irrigation system with a volume of 10 liters has been installed. The provided anti-vibration system allows to increase the operating life of the engine. A protective cover is responsible for protecting the transmission. Working range -10 ° С - + 40 ° С.

Average price - 37,000 rubles.

• build quality;
• starts up "half turn";
• wheels included;
• folding handles;
• anti-vibration system on the engine;
• operational period;
• protective cover;
• uninterrupted functioning;
• the engine is placed on a reinforced frame.

• excessive vibration causes the bolts to loosen frequently.

RedVerg RD-29155

A novelty among linear vibratory plates. The popular model is equipped with a four-stroke gasoline engine. Impact force - 13 kN with a power of 6.5 hp. For greater ease of use, the structure is equipped with a built-in irrigation system. With the help of a volumetric tank, you can moisten the surface immediately before starting installation work. To lay paving stones or paving stones, a polyurethane pillow is used, which is provided by the manufacturer in the kit. The soft material that covers the handle dampens most of the vibrations. The drive belts are protected by a special cover. A thick sheet of stamped steel is used as a base.

Cost - 39,000 rubles.

• the model is equipped with an irrigation system;
• polyurethane pillow;
• protective cover;
• ease of management;
• reinforced bottom;
• based on numerous reviews, this is the best model in terms of price / quality ratio.

• not identified.

DDE VP160-HK

Popular reverse type model. Equipped with a Honda gasoline engine. The impact force declared by the manufacturer is 30.5 kN. An excellent option for lovers of a neat and well-groomed suburban area, who in their free time seek to earn extra money by doing small repair and construction work. High performance design with 6.5 HP engine In one pass, the unit compacts the soil up to 0.5 m. Efficient selection and transmission of torque due to a three-cam clutch. The rotor is equipped with reinforced bushings. The engine is placed on a solid mount, due to which the manufacturer has achieved a high level of reliability and performance. For ease of movement, wheels are used that come with the kit.

You can buy it for 120,000 rubles.

• ease of use;
• use of high quality raw materials;
• powerful engine;
• the set includes transport wheels;
• reinforced steel bushings;
• operational period;
• powerful engine;
• high performance.

• not identified.

CHAMPION PC9045F

It is such a company that it is better to buy a vibrating plate for frequent use. The recommended model is equipped with a petrol-type four-stroke engine. The declared impact force is 15 kN with a power of 6.5 hp. Recommended by specialists as it belongs to the types of professional equipment. We advise you to buy those people who plan to compact sand or gravel, lay asphalt on the local area, restoration (partial) of the road surface. There is an oil sensor that will indicate a critical fluid level.

A recoil starter is used for quick start. Design features allow you to work in close proximity to a wall, curb, trench and poles. In an hour, the builder will be able to compact 416 square meters of surface.

Where to buy such equipment? In the online store or the nearest construction market in the city. The average purchase price is 38,000 rubles.

• oil sensor;
• abrasion protection (if there is not enough oil, the engine will not start);
• manual starter;
• work in hard-to-reach places;
• 3.6 liter tank;
• quick start in low temperature conditions;
• rubberized handles.

• not identified.

Rating of quality vibratory plates with diesel drive

This type of equipment does not start well in cold weather, and the operation process is accompanied by noise. However, among the main selection criteria, which the buyer pays attention to in the first place, are the following aspects:

1. Independence from external power supplies.
2. Long service life.
3. High degree of reliability.
4. Easy to operate.

WACKER NEUSON DPU 3050 H

The country of origin of the brand is Germany, which already speaks of the high build quality and positive tests for strength and endurance. If you plan to buy a high-quality, powerful and reliable vibratory plate, then this model is the best that the modern market can offer. The purchase will be successful only if the person is not constrained in funds. Otherwise, it will take several years of hard work in order to recoup the costs. The cost is due to the fact that the manufacturer offers high-quality professional equipment. Designed to work in difficult conditions and under severe stress.

The device will cope with any assigned task in a relatively short period of time. Productivity - 650 square meters per hour, which is considered a high indicator. With an impact force of 30 kN, compaction is carried out to a depth of 0.5 m. Engine power from the Hatzer brand is 9 hp. At a flow rate of 0.6 liters per hour, the efficiency is maximum. It should be noted and the possibility of self-repair. The price for the components is reasonable, so no special costs are foreseen.

Cost - 450,000 rubles.

• the best model for the right price;
• build quality;
• the possibility of self-repair;
• simple replacement of components;
• power;
• quality of work;
• professional equipment designed for large areas.

• price.

HUSQVARNA LG 204 D 500 MM

A popular product from the time-tested Swiss brand. For most people, this concern is known as one of the best motorcycle manufacturers. Including the manufacturer is engaged in the assembly of garden equipment, and vibrating plates in particular. One of the best products, no matter which side you look at, except that the price bites. However, the cost is more than justified due to the durability, versatility and reliability of the tool. The engine is not the most powerful (4.3 hp), but the impact force of the product is 38 kN, which is considered more than a high indicator.

The declared rotational speed is 3000 rpm, and the tamping depth is 40 cm. The indicators are not the highest, but they allow you to work under high loads. Ergonomics deserves special attention. The handle is movable, so it can be adjusted to any height.The manufacturer has applied a sophisticated innovative vibration damping system that will be appreciated by those operators who have had to work with this type of equipment.

How much does the kit cost? The purchase will cost 420,000 rubles.

• ergonomics;
• build quality;
• vibration damping system;
• hardy engine;
• professional model;
• durability;
• practicality.

• cost.

SHATAL PC-2014D

If necessary, the model can be ordered online directly from the manufacturer's website. First of all, when describing a product of their own production, manufacturers focus on the most important, in their opinion, criteria. A pre-installed (unique) vibration damping system is considered to be a design feature. The parameter, no doubt, is important, since the convenience of using the equipment as a whole depends on it.

A high vibration rate will make the operator's work stressful, and therefore short-lived. All companies, without exception, are working on a solution to this problem, but they have not yet succeeded in what Shatal engineers have been able to implement. The stove works flawlessly, however, according to users, it is not the length of the sole that matters, but the average power of the engine. Vibration has been reduced by flexibly connecting the tubular handle to the base. Here the manufacturer had to sacrifice build quality.

Price - 230,000 rubles.

• a unique vibration damping system is applied;
• duration of work;
• the convenience of use;
• the ability to replace individual components;
• ramming 25 cm of surface in one pass;
• quality engine judging by the photos offered by the brand.

• Chinese assembly;
• impact force - 20 kN;
• a mediocre machine for a lot of money.

MASALTA MSH160R-1S

An initial review showed that the model is considered one of the most compact on the market today. Many buyers pay attention to the mark "made in China" and in this case, the fears are justified. The assembly leaves much to be desired, however, small repair work can be carried out independently, without the involvement of expensive specialists. The dimensions were reduced by using a diesel engine, which is more compact than its gasoline counterpart. A prime example of a high-performance design that fits into a small package.

The main feature of the product is considered to be the ability to process difficult areas, which are characterized by the presence of potholes and other irregularities, including slopes. Thanks to the small plate and compact dimensions, the unit is able to crawl into even the most difficult-to-reach places. Power - 30 kN, which allows processing about 650 square meters of area within an hour. Powered by a 4.3 hp engine, which is an acceptable figure. Can be found on highways and highways.

Price - 135,000 rubles.

• compactness;
• mobility;
• performance;
• the convenience of use;
• maneuverability;
• ergonomics;
• operational period.

• Chinese assembly;
• cost;
• not suitable for all types of work.

ZITREK CNP 330А-3 AES

It is characterized by the presence of the latest control system. Country - manufacturer of the product - Czech Republic. On the territory of the country, it is considered the unspoken leader in the production of high-quality vibrating plates and other garden and industrial tools equipped with a diesel drive. A model worth considering that will be a practical solution to your problem. Among similar products, it has an acceptable price tag. What caused it is not clear.

The declared technical characteristics are beyond praise. An engine with a power of 13 hp is installed, and the possibility of ramming material up to 1 m deep. The impact force reaches 40 kN. During an hour of continuous operation, the unit will process over 650 square meters of the site. The indicators are high compared to models of the same price category.I got to the TOP by right, but many are confused by the high indicator of strength. The construction is tall, even for asphalt paving. There are not so many cases in which you will need to use a particular model.

Cost - 210,000 rubles.

• specialized equipment;
• heavy weight;
• build quality;
• height.

• impact strength;
• narrow-profile unit.

Rating of the best electrically driven plate compactors

Such products are distinguished by their relatively low weight, high environmental friendliness and low noise level. This allows the units to be used indoors (no emissions are observed due to the absence of an internal combustion engine). The power cable is the only limitation of the working area. Due to the fact that the operation of the unit requires an uninterrupted source of energy, the models are used less often.

 

VIBROMASH VU-05-45 220V

The country of origin of the product is Russia, therefore, there will be no problems in the search for auxiliary components and replacement parts. Vibratory plate of electric type. Belongs to the category of the simplest devices. It is a movable metal platform equipped with an ergonomic handle. A vibration motor is placed on it. 0.5-1 kV motor (depending on the type of product). Both options allow you to easily connect to a household network. There is no complicated system of connecting wires; a regular plug has come to replace them.

With the help of the device, you can tamp the layer up to 30 cm. It is not possible to calculate the exact squaring of the working surface, since there are some limitations regarding the motor. Gravel and sand are compacted quickly. It will take longer to pave the asphalt. Although the manufacturer claims that the tool is intended for road work, according to buyers, this model is an excellent solution for a summer cottage.

Price - 24,000 rubles.

• high engine resource;
• assembly;
• duration of manipulations;
• regular plug for connecting to the network;
• for home use.

• the scope of application depends on the length of the cable;
• different tamping times for each type of material.

RED LIGHTHOUSE VU-05-45

Compact model from a domestic manufacturer. Professional type unit. Designed for road works and other tasks that imply an increased load. In practice, no one seeks to acquire an electrically driven vibrating plate, and the manufacturer understands this. The stated scope of work is household farms, private and summer cottages. Perfectly cope with loose surfaces of any type. Tamping is carried out to a depth of 15 cm. For personal use, the indicator will be sufficient. An engine of 0.5 kV was installed, which is not enough for the arrangement of road surfaces. A household outlet and an extension cord (if necessary) are used for connection. Own cable length - 2 m.

Price - 26,000 rubles.

• for private use;
• tamping depth;
• economical consumption;
• build quality;
• ergonomics.

• length of cable.

SHATAL PC-1443

High-strength construction, the assembly of which is carried out on the territory of the Middle Kingdom. Chinese engineers often succeed in things that other manufacturers cannot. This model is supplied to the European market not only with electric drive, but also with diesel or gasoline. Configurations that remain unchanged deserve special attention. This information raises doubts, because each of the drives is designed for a different degree of stress. A special feature is the presence of a proprietary vibration damping system.

Price - 122,000 rubles.

• covers up to 25 meters of area per minute;
• force indicator - 13.5 kN;
• engine - 3 hp;
• configuration.

• assembly;
• cost;
• excessive vibration.

STROYMASHSERVIS IE-4509 A

The simplest device with a minimum number of options.Thanks to this, the manufacturer was able to reduce the cost of the product. The country of origin is Russia, which indicates the high quality of the raw materials used, assembly and the possibility of purchasing individual elements for subsequent repair. It should be noted that the installed electric type drive automatically imposes a number of restrictions on the device, the key of which is power. It is also necessary to remember that the device operates on a household network, so the structure can not be used on every construction site.

The electric drive is unable to compete with gasoline or diesel analogues. It is preferable to use such devices in summer cottages and household plots. In this case, there is no need to tamp the soil a meter deep. The device is able to eliminate irregularities and voids in a layer up to 20 cm thick, which is an acceptable indicator. The declared power consumption is 250 watts (connection to a household network is permissible without the risk of overload). There are no design features. The only difficult connection is the flexible hitch between the plate and the handle. Achievement is mediocre, however, it does not have the right to apply for another model.

Cost - 28,500 rubles.

• acceptable engine resource;
• model for private use;
• connected to the network by means of a plug;
• duration of work;
• build quality.

• not identified.

Rating of the best vibratory plates with hydraulic drive

Vibratory plate reversible TSS MS5030-H

The design is equipped with a reliable hydraulic drive. The product of a domestic brand, which is in deserved demand among compatriots. This series of hydraulic devices are based on the latest development. Reciprocating devices are designed for difficult working conditions. We are talking about the repair of urban and main roads, the laying of cables and pipelines. The device allows you to adjust the compaction forces, which will allow the unit to work with surfaces of any type.

Cost - 125,000 rubles.

• hydraulic drive (more reliable than mechanical);
• wide range of uses;
• high maneuverability;
• drive protection;
• cast plate;
• strength;
• operational period;
• low vibration rate;
• hose for easy oil drainage;
• set of wheels;
• reliable hydraulics.

• not identified.

NTC VDR75HE

The assembly of the installation is carried out in the Czech Republic. Tamping force - 75 kN. The device is designed for laying sewer systems, making road surfaces, preparing sites for the foundation of massive structures. The device allows you to adjust the pressure, which makes it possible to work with materials of any kind. The plate moves smoothly. The operator should also have no problems in the control process. The edges of the slab are reinforced and fully balanced. The control handle works not only as a safety catch, but also for reverse movement.

Price - 42,000 rubles.

• manufacturer's warranty - one year;
• strength;
• operational period;
• build quality;
• range of application;
• ergonomics.

• vibration indicator.

NTC VDR63HE

The product is manufactured in the Czech Republic. The manufacturer provides a brand warranty for 12 months. Tamping force - 63 kN. Reversible device equipped with an electric start. It is used for leveling trenches, areas for foundation, sand, crushed stone, gravel. Takes an active part in the arrangement of the site intended for roads. Ease of control and smooth running due to the stepless speed control of the key element. The edges of the slab are reinforced, which favorably affects the product's service life.

Cost - 28,000 rubles.

• design;
• ergonomic handle;
• oil sensor;
• hydrostatic control;
• powerful engine;
• one-piece frame (protective);
• compaction depth up to 85 cm;
• wear-resistant movable plate;
• durability of the structure.

• not identified.

Conclusion

The modern world does not stand still. Every year road and construction equipment undergoes qualitative changes for the better. Over time, the equipment becomes more productive and efficient, due to a number of advantages:

1. Increased operational life.
2. Reducing the cost of repair and subsequent maintenance of equipment.
3. Saving time and labor.

It is easy to make a mistake when choosing such equipment, and it is not at all about the technical features of this or that model. Some manufacturers are more conscientious, while others prefer to save on everything. Before buying a vibrating plate, it will not be superfluous to get expert advice from a specialist. This is the only way to purchase proven and really high-quality equipment.