Ranking of the best handheld construction mixers in 2024

In the process of construction or renovation, the tool used plays an important role. Among other works, it is often necessary to mix various kinds of mixtures and solutions; in this case, manual construction mixers come to the rescue. How to choose a suitable mixer, what criteria to evaluate in the first place and how not to miscalculate with the selected unit, we will tell below.

Technical Specifications of Handheld Construction Mixers

How to choose a more practical device and not miscalculate the price? It is necessary to know the functionality of the model, which is more important and what is not for the planned types of construction work.

Power

This is the main parameter of the mixer, and the average price mainly depends on it. Powerful mixer can mix more volume of solution or mixture with a thicker consistency in less time. But it consumes more energy, a high power supply network is required, extension cords must be designed for a higher current. And the device itself is more bulky. Therefore, they try to choose the optimal engine power.

Maximum speed

Liquid solutions are mixed at high speeds For viscous and thick compositions, devices with a lower speed are suitable. Highly revving mixers stir well, forming a more homogeneous mass. For a wider range of applications, use 2 or more speed mixers.

Speed ​​control and reverse

During the preparation of the putty solution or mixture, some builders use the gradual stirring method. By adding water or powder to the composition and bringing the solution to the desired consistency, they use a decrease or increase in the number of revolutions. To avoid splashes at the start, a soft start system is used. For various types of stirring and the convenience of pulling out the rim from the finished thick solution, reverse is used.

Number of speeds

There are single speed mixers for simple jobs. They are mainly produced with or without gearbox. But in the case of using a mixer for various types of various works, multi-speed ones with a gearbox are used. All this affects not only the price of the device, but also the durability of units and parts. The presence of a gearbox implies an increase in the engine speed reserve. And if it is a brush (mainly mixers are equipped with this type of motors), then the motor brushes fail earlier. Usually, these mixers are equipped with additional sets of electric brushes. The design of the device should be easy to replace this mixer part.

Best Construction Mixers of 2024

Mixer BOSCH GRW 18-2 E

The advantages of devices of the Bosch trademark, Germany, are evidenced by many years of experience in operating the products. And although many stores do not have this trademark on sale, this is not due to a lack of adequate product quality, but most likely due to obstacles in delivery. And high prices for goods - problems with imports. But still, if we recommend the best technology, then Bosch is the undoubted leader in this product line.

 

The construction mixer BOSCH GRW 18-2 E is an improved model of the Bosch GRW 11 E Professional brand, which has been discontinued. And if the predecessor has won the trust of users, then even more so the new model. Instead of a handle, it has a reinforced frame with two handles. Single, with one rim.

Its power is 1,800 W with a maximum speed of 1,050 rpm. There is a two-speed gearbox. The device has an electronic engine speed control. There is no reverse. Threaded type of chuck M14. The set includes a mixing basket 160 mm in diameter.

Weight of the device itself: 7.2 kg. Average price: 31,500 rubles.

• powerful and reliable car;
• when switching the speed, you do not need to tighten the spindle;
• has high durability;
• can be used as a powerful low speed drill.

• not the same quality compared to the previous Bosch GRW 11 E Professional model.

Mixer Makita UT1305

Since its inception, since 1915, the Japanese company Makita has been producing electric motors and generators. The richest experience in the manufacture of products of this kind affects its high quality and durability. Hand tools of this brand are in special demand among users.

Drill mixer UT 1305 from Makita is single-speed and has a smooth start. Power - 820 W, at a rotation speed of 1,300 rpm. Cartridge brand - M12. The cable length is 2.5 meters. Overall dimensions: 942 × 152 × 87 mm. The delivery set includes an additional 2 keys and a side handle.

It is intended for mixing building mixtures of concrete and putty, as well as glue, varnish, paint, etc. And also for drilling in metal, ceramics, wood and plastic, and other hard surfaces.

Drill mixer weight: 3.2 kg. Price: from 9 490 to 13 990 rubles.

• lightweight and ergonomic;
• It does a good job for mixing a mixture of concrete with sand on a screed, mixing the solution with high quality.

• expensive.

Mixer Fiolent MD1-11 E

The Fiolent plant is a giant of the Crimean state defense industry. And as you know, it is the defense industry of Russia that has always been famous for its unsurpassed quality.

A full-fledged hand mixer Fiolent MD1-11 E has an electric motor with a power of 1,100 W. The delivery set does not include a cartridge, but when using it, the device can be used as a drill. The body is made of plastic, the gearbox is made of metal, aluminum alloy, which contributes to good cooling of the motor. Especially when working under load for a long time.

The mixer is completed with a special metal handle-bracket, which has such a shape that no matter how you put the device, it will rest on it. If desired, you can purchase a special stand, turning the hand mixer into a stationary one.

The start button includes speed control. With light pressure, the device turns on at minimum speed, with full pressure, the engine turns on maximum. In any position, this button can be fixed with a side locking button. The maximum possible number of revolutions is set by the regulator on the start button in the form of a wheel. It is about 600 rpm. Electronic speed control, spare electric brushes included.

The most common internal thread of the M14 spindle is used to attach the rim. The weight of the device is 4.7 kg. Average price: from 3 346 to 3 512 rubles.

• powerful, reliable, mobile;
• excellent build quality;
• perfectly mixes thick, viscous mixtures;
• inexpensive;
• can be used as a drill.

• nozzles tighten themselves strongly, 2 keys are required for replacement.

Drill mixer Elitech MS 1600 / 2ED

LIT Trading has appeared on the Russian markets since 2008, releasing products under the Elitech trademark. The factories for the production of goods under the leadership of this company are located in China, as well as in Belarus. All products of the corporation are certified according to the ISO 9001 standard. An invariable advantage is the fact that this company in Russia has opened more than a hundred service centers for the maintenance and repair of equipment, which makes it easier to find units and parts with the Elitech trademark.

The two spindle handheld construction mixer has a power of 1,600 watts. It is designed for mixing concrete, glue, paint and other mixtures. Low revs in combination with high torque allow to work for a long time under heavy load, stirring the composition well.

To save working time, a quick-detachable attachment is provided. Also, the attachment and device of the electric motor brushes are implemented for quick and easy replacement.

The gearbox is made of metal for reliability and good cooling during long-term and peak loads. Moreover, its internal elements are reliably protected.

There are 2 speed modes: 540 rpm and 790 rpm. The switch is mechanical, installed on the gearbox. Smooth speed control is performed by the power button, depending on the pressing force. At the same time, the latch button can fix the desired position of the power button. Threaded connection of the nozzle with the M14 mixer.

The device weighs: 7.6 kg. Average price: from 6,100 to 7,169 rubles.

• convenient and powerful;
• adequate price.

• makes decent noise;
• unpleasant plastic smell at first.

Drill mixer Rebir EM-1450E and Rebir EM 1450 E-2

The company Rebir, Latvia was formed back in the Soviet 70s. She cooperates with the largest manufacturers in Europe and Asia. At the moment it is one of the most dynamically developing companies. The products are ISO 9001 certified.

The Rebir EM-1450E mixer, as the name implies, has a power of 1,450 watts. Produces 500 rpm. at maximum engine speed. The speed is adjusted by the power button with a lock. M14 threaded mount. The scope of delivery includes a whisk and additional carbon brushes.

It should be noted that the Rebir EM 1450 E-2 mixer has a mechanical speed switch in the gearbox. The first switch position corresponds to 650 rpm. at maximum engine speed. In the second position, you can get up to 1,000 rpm.

These mixers are designed for mixing plaster mortars, sealants, adhesives, varnishes and paints. And also other similar materials. The ergonomic handle, according to expert users, is very comfortable to use and much safer. The switch is dust protected.

Aluminum alloy gear housing extends service life and contributes to good cooling of the motor under continuous loads. The mixer uses a three-stage gearbox, so it has a large output torque. The engine speed control is electronic, the controls of which are located in the power button.

To protect the plastic handle from damage during falls and transportation, 2 steel strips are used, fixed along the edge of the handle. There is a possibility of using various configurations of nozzles, which are easily and quickly replaced. It is also possible to install the device in a stationary position, the neck diameter is 59 mm.

The mass of any of the devices is 4.3 kg. The price of a single-speed one is 6 435 rubles, and a two-speed one - 7 194 rubles.

• great device;
• powerful engine;
• Very well made, easy to use.

• inconvenient location of the power cord, sometimes it interferes;
• noisy.

Mixer Scheppach PM1800 D

Scheppach plant is located in Germany, in the city of Baden-Württemberg.There, not only equipment and devices are developed and produced, but also new items are tested. All products of this company have a quality certificate according to DIN EN ISO 9001-2008.

Scheppach PM 1800 D universal twin-spindle mixer with two counterclockwise blades. The spindle thread is M14. It copes with long-term work when mixing concrete with gravel or sand. It also mixes any finishing and building materials that need to be mixed. If necessary, you can use one nozzle without tripping the shutdown protection.

The engine power is 1.8 kW. The metal three-stage gearbox has a speed selector of 450 rpm. and 790 rpm. at maximum engine speed. This provides a large torque.

The engine speed controls are located on the opposite side of the device handle from the power button. Electronic speed control. This type of adjustment allows maintaining the stability of the engine speed under any vibration. And also to provide smoother and more convenient adjustment.

An air-cooled engine provides reliable operation in a wide range of conditions. In combination with a metal gear, the motor has good heat dissipation. The air intakes are located on the opposite side of the gearbox and spindles to prevent splashing.

Device weight: 7.5 kg. Price: 10 469 rubles.

• powerful and convenient;
• almost no vibration is felt.

• Not found.

Mixer Eibenstock EHR 20 / 2.5 S

The line of power tools from the German manufacturer, Eibenstock, includes many product names, the range of which is constantly growing. Products are exported to all countries of the world and are in demand.

The Eibenstock EHR 20 / 2.5 S mixer with a two-speed gearbox is designed for mixing up to 50 kg of medium and high viscosity mortars. It can be used to mix the filling compound, leveling compound, cement or ready-made mortar. As well as plaster or screed material.

For effective protection against dust, stones and dirt, as well as water splashes, a special cover with labyrinth guides is installed. The two-speed gearbox qualitatively ensures the selection of the optimal speed for different viscosities of solutions.

The metal H-shaped handle perfectly protects the device during transportation and fits comfortably on the floor. At the same time, the handles have rubber tips that protect against injury. The soft start system protects against jerking and splashing of the mixture at the start. Spindle thread - M14.

The power of the Eibenstock EHR 202.5 S mixer is 1,300 W. The speed is shown in the table:

Speed ​​switch position	Rated frequency, rpm.	Idling frequency, rpm
1	250	400
2	450	730

The construction hand mixer weighs 5.1 kg. Price: from 30,290 rubles.

• extremely hardy tool;
• body made of impact-resistant material;
• advantages of soft start.

• not high enough rpm at 2nd speed;
• high price.

Mixer Skil 1609 LA

Skil Corporation is currently the largest manufacturer of power tools in the world. In the European markets, this brand occupies 5%, and in the USA, the homeland of the company, as much as 18%. When developing tools, the company focuses on simplicity, quality and reliability of products. And, judging by the demand for products, she succeeds.

The easy-to-use Skil 1609 LA mixer is designed for the preparation of various mixtures from any components. It can be used to mix cement plasters as well as adhesives, paints and mortars.

The power button is combined with an electronic engine speed controller. And it is held in the desired position by the lock button. The motor power is 1 kW. The idle speed reaches 700 rpm.

The metal housing of the gearbox provides good heat dissipation and reliable operation under heavy loads. It is also not subject to thermal damage.

The simple and ergonomic handle with soft rubber tube-grips ensures comfortable handling. Supplied with support handle, universal whisk 120 mm, hex key. The spindle thread is standard - M14.

The maximum torque is 40 Nm. The vibration level is less than 2.5 m / s². Sound pressure level 89 dB (A).

The mixer weighs 3.4 kg. Price: 5 767 rubles.

• simple and compact.

• Not found.

Mixer Caliber ERMD-1600-2E

Russian representatives of the company "Caliber", whose production is located in China, break the stereotypes of thinking of buyers regarding the quality of goods from China. Many retail chains prefer this brand precisely because of the quality of the products.

Manual two-spindle mixer Caliber ERMD-1600-2E, judging from the name, has a power of 1.6 kW. The metal gearbox has a spindle speed switch.

The first speed is from 200 to 550 rpm, the second is from 140 to 380 rpm. Slower rotation is unnecessary, so the adjustment band is more stretched, which is very convenient. Internal thread of the spindle - M14. Electronic adjustment has a separate control, smoother, not combined with the power button. A special button is provided to fix the on lever.

The mixer handles are reliably protected by a U-shaped metal bracket that protrudes much further than the handles. Thus, the bracket is a device for two people, as well as additional protection of the hands from possible injuries during operation.

Weight: 8 kg. Price: from 4 350 to 5 990 rubles.

• high quality and reliable;
• good budget option;
• powerful and not expensive.

• Not found.

Mixer Zubr ZMR-1200E-1

The Russian manufacturer Zubr OVK is very popular among users of high-quality power tools. The company focuses on product reliability and high ergonomics.

The manual mixer Zubr ZMR-1200E-1 is intended for professional use. It can be used to prepare various building mixtures. Stir paint, adhesives of various viscosities. Prepare cement mortars, putties and plasters. The maximum mixing volume is about 120 liters.

The mixer has a widespread method of fixing the attachments with the M14 spindle thread. The handles have anti-slip, soft pads. The motor power is 1200 W.

The metal gear case has good heat dissipation, durability and strength of the gear box. The gearbox has an engine speed switch. The maximum frequency in the first position is 620 rpm. In the second - 810 rpm.

The power button, consisting of an electronic speed governor control and a latch button, provides a smooth engine start. This avoids splashing when stirring the mixtures.

Device weight: 5 kg. Price: from 4 859 to 6 330 rubles.

• has been used for a long time on all types of construction repairs;
• reliable and compact;
• inexpensive.

• None.

Hand Mixer Purchase Guide

Since the principles of operation of the mixer are similar to an ordinary drill, when choosing the power, they are guided by the amount of work. The number of revolutions per minute is selected based on the viscosity of the prepared solution. In the case of working with various types of solutions, a mixer with a two-speed gearbox is used.

Specialists such as a painter, plasterer, stove-maker use a compact, one-speed, small-sized hand mixer. More generalists use two or more speed mixers, with one or two beaters. Some manufacturers specifically classify their product by type of use.

Team builders use powerful and multi-speed mixers.Or they buy several devices with different characteristics. In addition to powerful devices, compact low-power tools may also be available, this is especially convenient when teams work at various objects.

Usually builders prefer to purchase tools from one manufacturer. But for the sake of familiarization, you can try using new models. A wide base of power tools is presented in the markets of online stores.