Ranking of the best Inno3D graphics cards in 2024

The computer electronics market currently offers a lot of models that make up the rating of the best video cards, including Inno3D. The manufacturer produces video cards for laptops and PCs based on the NVIDIA graphics accelerator. There is a huge number of modifications of this series of video cards, which makes them very popular. However, all models have a common advantage - this line is notable for its small dimensions, practically silent cooling system, high efficiency and undemanding power supply.

It should be noted that NVIDIA ranks among the best manufacturers of components for personal computers. Before choosing the most suitable model, it is recommended that you read the tips that list the selection criteria, as well as the technical characteristics of individual video cards. This is the only way to avoid mistakes when choosing.

Tips for choosing a graphics card in 2024

Since a video card is considered the most expensive type of component, you should be especially careful when choosing it. The processor clock speed is considered important when installing identical chips in video cards. Installing different chips cannot guarantee that the higher frequency device will be the best. The next selection criterion is the bus width - 128-bit and 256-bit, respectively, will belong to different price ranges. In addition to the bus width, such video cards will also differ in the chips installed in them and in cost. A 256-bit bus is twice as expensive as a 128-bit bus.

Despite the fact that such a parameter as the amount of video memory also deserves attention when choosing a video card, it is one of the fundamental when choosing video cards with the same chips related to the budget price segment. The amount of available memory on older models doesn't really matter. However, when choosing modern modifications, you should familiarize yourself with the tests of the computer game preferred by the gamer, checking the capabilities of various components with different video memory sizes.

Thus, when choosing a video card in 2024, you should find out the number of frames per second that it is capable of producing and FSAA. Based on the technical characteristics, one can only assume the power ratio of the two tested models. Often, the card with the best technical characteristics, during the gameplay, gives worse results than the analogue produced by another company. You can only decide if you make a visual comparison.

The device for which the video card is selected is of no small importance. For example, an outdated PC with 2GB of RAM is unlikely to cope with a video card with the technical dimensions of a 256-bit bus width. In the case when a personal computer has less technical capabilities, the installation of advanced gaming video cards ceases to have any impact on the performance of games. In this case, all games will freeze during the launch process.

When it comes to replacing all components of a personal computer, you can purchase any modern video card.This is due to the fact that every couple of years more and more powerful parts are produced, the cost of which is significantly reduced in price. From this we can conclude that buying the latest model, for example, such as a low-profile Low Profile card for an unreasonably high price does not make sense. In particular, if the budget for the purchase of this component is limited and the question is how much it costs, then before deciding which company is better to buy, you should focus on the test rate.

It should also be noted that it is not recommended to install a video card for games of the latest model on a budget personal computer made in China. In the best case, the processor will not be able to start, which is affected by the overpowering of the card. As for the dimensions, they should be about thirty centimeters long. Purchasing a larger or smaller part will make it impossible to install it in a PC case. You can find out the exact size of the part by reading the information provided by the official website or online store.

One of the existing modifications

Many still insufficiently professional gamers are also wondering: is it better to buy two budget video cards or one of the most powerful ones. In this case, you should give preference to one, but better quality. It is not recommended to install two cheap video cards, despite the best test results.

There is also such a criterion as the overclocking speed of video chips. However, this indicator is also not always dictated by the cost of the card. The overclocking ability is determined by the level of safety margin and the quality of the cooling system, as well as the principle of its operation. There are frequent cases when overclocked cards of a cheaper segment are in no way inferior to expensive models over time.

The best models of Inno3D video cards

Inno3D GeForce GTX 1070

Inno3D Jifors GTX 1070 is a gaming graphics card capable of providing a maximum screen resolution of 7680X4320. The technical process is 16 nm. A component with a GPU frequency of 1607 MHz can supply a signal to four monitors simultaneously. Memory type GDDR5 with a volume of 8 GB. The 256-bit model supports CrossFire and Quad SLI. Provides DVI-D, HDCP and HDMI connectors. A card with 5.0 shader units and 152 texture units. Inno3D Gifors GTX 1070 is components that support DirectX 12 and OpenGL 4.6 standards. CUDA and Vulkan are also supported. Designed to operate with a 500W power supply unit with four fans and three occupied slots. The cost of the video card will cost 32,000 rubles.

Inno3D Gifors GTX 1070

• high image quality and rasterization;
• an overview is provided on four monitors;
• large amount of memory;
• the presence of the CrossFire mode;
• modern graphics processor;
• with Quad SLI function;
• there are three connectors;
• not bad in power;
• the number of texture units 152;
• 0 frequency of shader units;
• support for DirectX 12 and OpenGL 4.6 standards;
• there are four fans;
• good anisotropic filtering;
• suitable for graphics;
• the presence of three occupied slots;
• support for CUDA and Vulkan.

• high price.

Inno3D GeForce GTX 1050

Inno3D GeForce GTX 1050 is a good and cheap video card with low power consumption, 14 nm process technology, providing a screen resolution of 7680X4320. It can broadcast a signal to three monitors, has a GPU frequency of 1290 MHz. The card with a capacity of 4096 MB has a GDDR5 memory type with a frequency of 7 GHz, it has a 128-bit bus. Supports DVI-D, HDCP and HDMI connectors. 5.0 shaders, 48 ​​texture units. The model is designed to work with standards such as DirectX 12 and OpenGL 4.5 and 400W power supplies. This video card provides support for CUDA and Vulkan, there are two fans. This model is included in the class, which is made up of low-cost electronic components for a computer and costs 12,000 rubles.

Inno3D GeForce GTX 1050

• high screen resolution;
• technical process 14 nm;
• the number of broadcast monitors is three;
• there are three connectors;
• work with DirectX 12 and OpenGL 4.5 standards;
• availability of CUDA and Vulkan;
• affordability.

• 128-bit bus;
• low frequency of the video processor;
• equipped with two fans.

Inno3D GeForce GTX 1060

Inno3D Gifors GTX 1060 is a model of a gaming video card with a 16 nm process technology and a screen resolution of 7680X4320. The component with a GPU frequency of 1506 MHz transmits the signal to four monitors. The GDDR5 memory has a capacity of 6144 MB and a frequency of 8 GHz. The video card has a 192-bit bus. Supported types of connectors are DVI-D x2, HDCP and HDMI output, DirectX 12 standards, OpenGL 4.5.5.0 version of shaders. There is CUDA and Vulkan. The part equipped with two fans is designed to work with 400W power supplies. In terms of price, the GeForce GTX 1060 can be classified in a class that is made up of inexpensive technical components, since such a video card costs 19,000 rubles.

Inno3D Jifors GTX 1060

• 16 nm technical process;
• great screen resolution options;
• broadcasting the signal to the interface of four monitors;
• good amount of video memory;
• powerful cooling system;
• high memory frequency;
• connection through several types of connectors;
• work with DirectX 12 and OpenGL 4.5 standards is provided;
• shader unit frequency 5.0;
• good TDP indicators;
• VESA Stereo;
• good reviews from gamers;
• availability of CUDA and Vulkan.

• 192-bit bus;
• insufficient number of fans for instant cooling.

Inno3D GeForce GTX 1080

Inno3D GeForce GTX 1080 is a gaming and office card with 16 nm process technology and 7680X4320 screen resolution. The signal can be fed simultaneously to four monitors. The device with a GPU frequency of 1607 MHz is equipped with a sufficient amount of memory, which is more than 8 GB. GDDR5X memory is clocked at 10 GHz. A 256-bit bus, 5.0 shaders are installed, there is CrossFire. The case is equipped with DVI-D, HDMI and DisplayPort x3 connectors. DirectX 12 and OpenGL 4.5 standards are supported, CUDA and Vulkan are available. Recommended for installations with a 500 W processor. The number of occupied slots is two. This video card model costs 38,000 rubles.

Inno3D GeForce GTX 1080

• 16 nm technical process;
• high maximum resolution;
• suitable for 4k;
• signal feed to four monitors;
• large amount of memory;
• pretty quiet;
• there is a DVI port;
• high clock rate of video memory;
• 256-bit bus;
• professional model, suitable for photoshop;
• support for DirectX 12 and OpenGL 4.5 standards.

• few occupied slots;
• high price.

Inno3D GeForce RTX 2080

Inno3D Jifors RTX 2080 is a 12nm gaming video card that transmits a signal to four monitors and has a screen resolution of 7680X4320. This part is equipped with GDDR6 memory with a frequency of 14 GHz and a volume of more than 11 GB. Supports Cross Fire, SLI, DirectX 12 and OpenGL 4.6 standards. In addition to the usual HDMI and DisplayPort x3 connectors, USB Type-C is also provided. Shaders version 7.1. There is Vulkan and, another thing to pay attention to - CUDA version 7.1. The number of occupied slots, as well as the installed fan, is two pieces. The purchase of this type of video card will cost almost 100,000 rubles.

Inno3D Jeefors RTX 2080

• signal supply to four monitors;
• large screen resolution;
• equipped with GDDR6 memory;
• large amount of Hyper Memory;
• wide functionality;
• a sufficient number of stream processors;
• almost silent;
• there is a RAMDAC;
• optimal for the designer;
• the presence of the CrossFire mode;
• water cooling is provided;
• there is an HDCP port;
• support for DirectX 12 and OpenGL 4.6 standards;
• in addition to standard connectors, there is a USB Type-C and TV-out connection type;
• new generation of shaders;
• the ability to work with the Turbo Cache mode;
• modern modification of CUDA version 7.1.

• two fans;
• high price;
• two working slots.

Inno3D GeForce RTX 2070

Inno3D Gifors RTX 2070 is a modern card with highlighting elements. 144 texture units. DirectX 12 and OpenGL 4.5 standards are supported. The technological process is 12 nm. The shader unit frequency is 6.0. Video memory of the GDDR6 type with a capacity of 8 GB. 256-bit bus, four plug-in monitors. HDMI, three Display Port outputs, USB-C. The screen has a maximum resolution of 7680X4320. There are two connectors for additional power supply. The number of occupied slots is two. The cost of the model is 41,000 rubles.

• the presence of highlighting elements;
• shader frequency 6.0;
• equipped with advanced video memory GDDR6;
• sufficient memory space;
• connection to four monitors;
• three Display Port and USB-C outputs, except for standard connectors;
• high screen resolution;
• availability of connectors for additional power supply.

• does not apply to Low Profile cards;
• two working slots.

Inno3D GeForce GT 730

Inno3D GeForce GT 730 is one of the budget cards of this line with a maximum screen resolution of 4096X2160. This design supports OpenGL 4.4 and DirectX 12. Technological process 29 nm. 16 texture units, 5.0 version of the shader frequency. DDR3 video memory has a capacity of 1 GB. 64-bit bus. Can connect to three monitors at the same time. There are HDMI, VGA (D-Sub) and DVI-D outputs. Designed to work with a 300 W power supply. Cooling type - passive, Low Profile format. There are two occupied slots. This card costs 4,000 rubles.

Inno3D GeForce GT 730

• low price;
• support for major formats;
• 5.0 version of shaders;
• connection to three monitors;
• availability of HDMI, VGA (D-Sub) and DVI-D outputs;
• Low Profile format.

• small amount of video memory;
• passive type of cooling;
• 64-bit bus;
• two slots.

Before purchasing a video card for your PC in 2024, you should decide which company is better - for this you need to carefully study the rating of quality modifications and a description of similar products. Currently, the computer electronics market offers a lot of components for work on the basis of the NVIDIA graphics accelerator. In this material, the most popular models of Inno3D video cards were listed, their cost, advantages and disadvantages, as well as tips on how to choose the most suitable one.